Labeling machine

MEB ADL 04

Condition: like new (used), Year of construction: 2004, COMPLETE PET BOTTLING LINE | 13,000 BPH Speed: 13,000 BPH at 0.5L 12,000 BPH at 1.5L Working hours: approximately 2,500 per year Blower SIPA 2004 Model: SFR12 Number of cavities: 12 Preform tipper. Air recovery Compressor NOT PRESENT Chiller NOT PRESENT Piping NOT PRESENT Included formats: 0.5 L – 1.5 L – 2 L – 0.66 L Air conveyor LANFRANCHI 2002 Saturator ALCIAMPIANTI 2006 Ozone generator PROCOMAC 1997 Filling monoblock PROCOMAC 1997 Rinser with 36 clamps Model: GRIPSTAR Isobaric filler, 48 valves Model: FILLSTAR PET 48.12 Functions: Sanitization De-gassing Capper AROL 12 heads – 2018 Model: TS EURO PK Cap types: Alaska Sport cap Hopper, elevator and unscrambler included Bottle inspector OMRON 2008 Level control Cap presence check Expulsion in case of defects Labeller P.E. 1997 Model: FUTURA 15T Number of heads: 15 Label type: wraparound Type of glue: glue Chjdpfjtqfg Hex Abbof Gluing system Nordson 2010 Conveyor belts PROCOMAC 1997 Shrink wrapper SMI 1997 Model: APET 143/D Type: film launch Packable formats: 3x2 4x3 6x4 Handler SMI 1997 Model: MAB 60 Number of lines: single Double reel magazine Palletizer TMG 1997 Model: SIRIO 2S1C Type: push system Interlayer system Pallet storage Pallet wrapper TOSA 1997 Model: 121 Type: rotating arm Functions: Pre-stretch Top sheet application Machinery has been serviced regularly, about once per year Last maintenance: April 2024

Condition: used, Year of construction: 1992, Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Cedpfxsnpbhvo Abbohf

Condition: ready for operation (used), Power / connected load 16.5kW / 400 V / 50/60 Hz Type of heating electric Boiler material stainless steel V2A Connection cable with CEE plug 32A Fuse at least 3 x 25 A Boiler capacity 240 liters Boiler inner diameter 680 mm Weight 302 kg Operating pressure max. 2.5 bar Control range temperature up to 125°C Water temperature 2 to 138°C Dimensions (W x D x H) in mm approx. 890 x 1530 x 2230 Required water and compressed air connection: Cold water connection: Version ½“ or ¾“ Operating pressure = at least 350 kPa (3.5 bar) static max. 600 kPa (6 bar) static Codpfou D Hcrjx Abbjhf Flow pressure = at least 150 kPa (1.5 bar) dynamic Compressed air connection: Operating pressure = at least 5 bar / maximum 7 bar

Year of construction: 1999, condition: used, Name: Eccentric Screw Pump Manufacturer: Seepex Type: BN10 Year built: 1999 Material: mild steel Driving force: 9,2 kW Max. operating temperature: 20°C Dimensions: L 2400 mm x W 300 mm x H 420 mm Csdpfx Aboh Tkafebjhf Empty weight: 250 kg Speed: 75 -430 rpm Flow rate: 1,5 -12 m3H Operating pressure: 16 bar Operating voltage: 380-20 / 655-725 V Type of protection: 55 Flanges: DN 80 / 100 Condition: Used Technical documentation: no Price: on request

Condition: new, Year of construction: 2025, functionality: fully functional, Labeling system for round and square canisters Stainless steel frame 170 mm wide link chain (optionally wider possible) Csdpfxeu Ia E Ie Abbehf Standard label width 140 mm or 190 mm, optionally up to 260 mm possible Label length 300 mm, optionally longer Dispensing speed up to 30 m/min., optionally 50 m/min Product diameter according to technical testing from 20 mm - 170 mm, optionally other sizes possible Touch screen display, with storage option Label dispenser with three-dimensional adjustment option Product separation with two-sided belts Product alignment for square bottles Top belt guide for square and oval products Other labeling options, such as lid labeling, seal labeling, bottom labeling, etc.

Condition: used, Year of construction: 2019, Cylindroconical fermentation and storage tanks, standing on four feet, with a maximum operating pressure of 2.5 bar. The tanks are each equipped with frame and cone cooling, cleaning lines, two outlet lines (cone tip and cone wall), pressure gauge, bunghole, hose level indicator, sampling tap and temperature control. Additional title: vertical, coolable, stainless steel pressure tanks with temperature control Cjdpfx Abexf D Iasbshf Gross volume: 2500 l Operating pressure: 2,5 bar Operating temperature: 50 °C Height: 2800 mm Material: stainless steel 1.4301 (AISI 304) Position: standing on 4 feet Base construction: cylindroconical Features: cooling jackets, insulation (50 mm chloride-free PU foam) cleaning line, 2 outlet lines with manual valves, pressure gauge, bung apparatus, hose level indicator, temperature control, sampling tap

Condition: used, Year of construction: 2014, Herma automatic labeling machine Chodpfx Abevb Ntkobef

Condition: used, Year of construction: 2012, Overview This microbrewery had to cease operations in recently. The original plan was to continue operations, but as this did not happen for various reasons, the entire equipment is now being sold as a whole. Equipment Steam generator with gasoil burner and its tank. Three-phase mill for grain grinding. 800-liter brewhouse with steam jacket consisting of boiler, filter tank, lung, liquor tank, tubular cooler, accumulated osmotized water tank, and 3 necessary pumps for its operation. Industrial osmosis and descaling equipment. 4 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1000 liters. 3 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1300 liters. 1 cooling system for fermenters with temperature control panel by PLC. 1 cleaning pump. 1 transfer pump. Several hoses necessary for transfers and packaging. 1 atmospheric monoblock bottling and capping machine for 33 cl bottles with filling capacity of 1,200 containers/hour. 2 compressors necessary for the operation of the bottling machine. 1 manual 6-spout filler for emergencies and special bottles. Semi-automatic adhesive labeler. 1 compressor necessary for the labeler. Ribbon printer for adding variables to the labels, with rewinder. 1 pallet truck. 6m x 2.50m x 3m high refrigeration chamber. Industrial scale. Including all sandwich panels from which the production rooms are made Cedpfx Aeuzpipjbbshf

Condition: ready for operation (used), Year of construction: 2009, Moulding depth: 12mmm, working area: 100x70mm, max. coil diameter: 250mm, speed: 1-30 cycles/min, with documentation, the machine was never used. Chedpen R Nhfofx Abbef

Condition: used, Year of construction: 2016, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 3,000 bph List of machines Blow moulder| Kosme| KSB4RG 2016 | 3600 bph Air Transporters| NTS | 2016      Rinser - Filler - Capper| GyM | MONOBLOC 12/3 PVG| 1995|3000bph Caps Feeding Tolva| GyM | 1995      Handles feeder |TAS| VA-1150/75C | 2009 | 3000bph Handle applicator| And&OR | 50SIA5000R8P2-TL | 2009| 3000bph Labeller| Auxiemba | Gacela R-16/8-HM-12 | 2010 | 4100bph Lot Coder| MACSA | K-1030PLUS| 2008      bottle spinner / rotator| GyM | 2001     Divider | SMI |  DIVIPACK 2000  |2002    Shrink Packer| SMI | LSK 30F | 2002 | 7200 bph (30 packs per minute 2*2 on 2,5L / 2 on 5L) Csdstuyq Rjpfx Abbjhf