Heavy duty roller tracks

Jöma Schwerlast Rollschienen

Condition: new, Wet exhaust system Cjdoci Tlrjpfx Ap Dohd - available in steel and stainless steel - suction output 1650, 3750 or 7000 m3/h - engine 3,5.5 or 15 kW

Condition: new, maximum load weight: 36,156 kg, overall weight: 45,000 kg, axle configuration: 3 axles, Year of construction: 2026, MAX200-N-3A-13.60-19.5-2.54 Technical Data Speed: 80 km/h Total weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Unladen weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Loading area length: 13,600 mm Fifth wheel height, loaded: 950 -> 1050 mm Rear overhang: 2,300 mm Extendable by: 3,400 mm Wheelbase: 1,360/1,405 mm Overall width: 2,540 mm Technical Description Chedpfeg Sk Tvex Ap Dod Loading area: Extendable loading platform with pneumatically operated locking mechanism. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of lashing rings, foldable outwards (LC 5,000 daN). 2 pairs of lashing rings, foldable outwards (LC 10,000 daN). Cutouts in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN). Fifth wheel: JOST fifth wheel (mechanical) with 2-speed gearbox for 24t Load capacity (50t test load). Axles: SAF axles: SAF CD axles, air-suspended, with disc brakes (377 mm), with lift/lower function (ET 120). The trailing axles with electro-magnetic reversing lock can be activated via reverse gear or manually. Axle tool. (± 80 kg) Braking system: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Steel construction: Steel construction made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: First-class and durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) topcoat, solid color, in RAL colors of your choice. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint is not possible. Electrical system: Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included Accessories Yellow-red air couplings on the galvanized connection strip at the front. 2 chocks with holders. 2" King Pin A galvanized steel front panel approx. 2200 mm high. (± 105 kg) EN12642-XL Yellow reflector tape according to EU regulations on the side, on the extension and at the rear of the trailer. European reflector signs (red-yellow) at the rear of the trailer. Loading area with approximately 38 mm thick hardwood floor. (± 320 kg) 10 pairs of pocket rails for plug-in rails 100 x 50 mm in the outer frame of the loading platform. (± 30 kg) 1 spare wheel holder under the loading platform on the right side, in the direction of travel. Tires 435/50 R 19.5, at the manufacturer's choice. One mudflap at the rear of the trailer. Manual and description on a USB stick. One mounting for a rotating beacon at the rear of the trailer. On the swan neck and at the rear panel, left and right, one mounting each for warning signs including socket. One INOX tool box transversely under the loading platform (1000x400x2500) (± 135 kg) 6 pairs of WADER container pockets in the loading area, for 1x20' container, 2 x 20' containers or 1 x 40' container; an additional locking point is provided in the extension for a 45' container. (± 90 kg) 4 pairs of WADER container locks. (± 60 kg) 10 pairs of galvanized plug-in rails approx. 100 x 50 mm, 1,000 mm high. (± 220 kg) 3 pairs of pocket rail strips, mounted transversely in the loading area, for plug-in rails 100 x 50 mm. (± 95 kg) S

Condition: good (used), functionality: fully functional, Chain mortiser LS 102 Rated power: 1800 W Rated voltage: 230 V, 50 Hz Rated idle speed: 4050 rpm Mortising depth: 100/150 mm (depending on the chain set) Adjustable cross stop, steplessly adjustable from 8 to 150 mm Weight of the base unit: approx. 9 kg Slotting machine SG 500: Slotting depth, vertical/horizontal: 500 mm Slot width: 10-17 mm Slot length: 50 mm Weight: approx. 32 kg including guide rail + chain Guide frame FG 150 for mortising depth up to 140 mm Chjdpfx Apezi A Elo Djd

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 12,000 W, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 15 mm, power: 12 kW (16.32 HP), warranty duration: 24 months, Equipment: safety light barrier, DURMA HD-FN 3015 fiber laser cutting system: The ideal price-performance solution. The DURMA HD-FN 3015 fiber laser cutting system is the best choice for companies looking for maximum performance and efficiency at an unbeatable price. This state-of-the-art system combines innovative technology with user-friendly operation, offering outstanding benefits for metalworking. Technical specifications Laser power: 12 kW With automatic shuttle table Maximum sheet thickness: Mild steel: 30 mm Stainless steel: 25 mm Aluminum: 30 mm Copper: 15 mm Cutting area: 3060 x 1525 mm Movement axes: Cedpfou E Tczex Ap Dohd X-axis: 3060 mm Y-axis: 1525 mm Z-axis: 125 mm (max. 275 mm) Metal sheets Maximum sheet size: 3048 x 1524 mm Maximum sheet weight: 240 kg/m² Speed and precision: Maximum speed X-axis: 100 m/min Maximum Y-axis speed: 100 m/min Maximum simultaneous speed: 141 m/min Maximum acceleration: 14 m/s² Positioning accuracy: ± 0.05 mm Repeat accuracy: ± 0.05 mm Main features of the system: ・Changing table: Positioned lengthwise for best access to loading and unloading systems. ・Enclosed cutting chamber: Equipped with protective glazing for maximum safety. ・CNC graphic control: With a user-friendly touchscreen for easy operation. ・Laser source: Brilase 12 kW. ・Cutting head: Automatic adjustment of the focus for precise cutting processes. ・Integrated cooling system: Ensures efficient cooling of the cutting head and laser source. ・CAD/CAM software: Enables programming including autonesting for optimum material utilization. ・Positioning laser: Supports the exact positioning of workpieces. ・Sheet metal check system: Automatic detection of the sheet metal position and dimensions for improved process reliability. ・Automatic nozzle cleaning: Ensures continuous cutting quality. ・Central lubrication: For smooth machine maintenance. ・Waste box: For a clean working environment. ・Work area lighting: Ensures good visibility during operation. ・Multi-chamber extraction system: Effective removal of smoke and particles. ・Light barrier protection: Ensures safety when changing tables. ・Remote maintenance access: Facilitates remote diagnosis and maintenance.

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 30 kW ✔ Shaft length: 870 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 2x19 ✔ Granulation: 10-50 mm ✔ Capacity: up to 7 m3/h* ✔ Material discharge opening: 200 mm ✔ Filling opening: 1446 x 1565 mm Cedpfxeiq U D Es Ap Djhd ✔ Dimensions L/W/H: 2,15/1,97/2,04 m ✔ Weight: 2050 kg 2 years warranty or 2000 working hours

Condition: new, Year of construction: 2026, functionality: fully functional, power: 42 kW (57.10 HP), inner dimension length: 3,000 mm, inner dimension width: 1,500 mm, inner dimension height: 1,800 mm, total length: 4,033 mm, total width: 1,800 mm, total height: 2,553 mm, fuel type: electric, Equipment: CE marking, documentation/manual, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for an individual transport quote. ✅ Made-to-order manufacturing ✅ Brand new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after receipt of payment 📦 Please also inquire about current stock availability. ➖➖➖➖➖ ⭐ Matech Powder Coating Oven with Electric Heating – MATOVENB-151830 MATECH QUALITY – WITH PROTON SERVICE! ☘️ Efficient ☘️ Powerful ☘️ Professional Curing ✅ Electrically heated powder coating oven ✅ Digital temperature control up to 220°C ✅ Adjustable curing temperature and curing time ✅ Adjustable automatic exhaust fan function ✅ Audible signal at the end of the curing time ✅ Insulated door with special locking system ✅ Stable sandwich panel construction with strong insulation ✅ Timer function from 10 minutes to 24 hours ✅ Automatic shutdown after process completion ✅ Can be used with a mobile workpiece trolley ✅ Optionally with insert shelf system for small series ♨️ Also available as a high-temperature version up to 500°C. ⚡ Depending on the model/project, also available with electric, gas or diesel heating. ➖➖➖➖➖ Technical features: ✔️ Model: MATOVENB-151830 ✔️ Internal and external dimensions: see technical drawing in the image gallery ✔️ Electrical heating power: 42 kW ✔️ Fan capacity: 3,000 m³/h ✔️ Circulation fan: 1.50 kW ✔️ Exhaust fan: 0.53 kW ✔️ Total power: approx. 45 kW ±10 % ✔️ Digital temperature control ✔️ Temperature continuously adjustable up to 220°C ✔️ Inside: 1.2 mm galvanized steel ✔️ Outside: 1.2 mm powder-coated steel ✔️ Insulation: 150 mm ✔️ 50 mm rock wool + 100 mm fiberglass ✔️ Adjustable curing time ✔️ Adjustable exhaust fan function ✔️ Audible signal after process completion ✔️ Control panel: 1 piece Other MATOVENB powder coating ovens in various sizes are available. Dimensions and technical data of the other models can be found in the attached catalog. ➖➖➖➖➖ ⚙️ Optional control functions ✅ PID control for precise temperature control ✅ Touchscreen control panel and smartphone control ✅ Ramp heating mode for defined temperature profiles Csdpfx Aeiiwa Dsp Dshd ✅ Storage of process parameters ✅ Weekly and monthly reports at the touch of a button ➖➖➖➖➖ 🛡️ Safety and process control Safety sensor to prevent overheating Automatic shutdown in case of a fault Acoustic warning signals in case of errors Smoke extraction via automatic ventilation ➖➖➖➖➖ ♨️ Ramp heating mode (optional) Control the temperature profile and holding times precisely: • Reach the target temperature in a defined time • Maintain the desired time • Controlled cooling down to the target temperature • Automatic notifications for process events ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer various financing models. Please contact us for leasing, hire purchase or installment payment options. ➖➖➖➖➖ Special sizes or individual designs are possible upon request. We will gladly plan a suitable solution for your workshop. Inquire now – make your company fit for professional powder coating!

Condition: ready for operation (used), Year of construction: 1990, MARKON Log house drilling machine with undercutter year 1990 Chjdpofw Rt Rofx Ap Dsd manufacture Markon Lathi / Finland Length = 3550mm Width= 1500mm Height= 2910mm Engine power Drilling unit: 6 x 3 kW moulder: 1 x 5.5 kW Dimensions of the log to be pushed Height max 250mm Height min 130mm Width max 250mm Width min 60mm Length min 600mm Tool sizes and speeds Drill max diameter 40 mm Moulder max diameter 250 mm Drill length 325 mm Drill mounting arm diameter 20h7 mm Drill rotation speed 2880 rpm Moulder: rotation speed 2880 rpm AIR Suction openings dia. 160 mm 2 suction openings Drill unit suction opening diameter 90 mm Suction openings 6 pcs Air speed at the suction opening 30 m / s Air consumption 8460 m3 / h electrical connection Total power 380 V 24 kW Compressed air connection Minimum pressure 6 bar Drilling unit air demand / stroke "48 1 Total air demand ~ 2200 1 / min incl. 3,5 meter roller conveyor + 12 drillings

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Chsdpfx Aexz Hh Uep Djd Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: excellent (used), gear motor, electric motor, electric gear motor, spur gear motor -Condition: unused -Manufacturer: SEW-Eurodrive, spur gear motor -Type: RF97 DRN132S4/TF i27.58 Codpfxot Uluyj Ap Dshd -Speed: 53 rpm -Power: 5.5 kW -Shaft: Ø 60 x 90 mm -Protection class: IP54 -Quantity: 2 pieces available -Price: per piece -Dimensions: 860/350/H410 mm -Weight: 170 kg/piece

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 000247, GLUE MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE. SPECIAL FOR GLUING LAMELLAS OF LAMINATED BEAMS • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm and controlled by solenoid valve • Glue cord pitch: 10 mm Csdpfx Ast Nfarjp Dehd • Tray with non-stick liquid that automatically closes the combs when the machine does not dose • Glue dosage: 100 to 200 gr/m2, as determined • Gear metering pump • Glue viscosity range: 10.000 to 30.000 mPas • Drag speed: 7 to 15 m/min • Support for 200 l barrel • PLC control, with touch screen. KINCO brand • Machine from the GLUESTREAM company • CE rules • Machine manufactured in 2021 and assembled in May 2022. Like new, it has worked less than 50 hours WE ALSO HAVE THE HYDRAULIC PRESS TO MAKE GLULAM BEAMS, ALMOST NEW MACHINE