Hydr. four-roll round bending machine

IMCAR 2050 x 6/4 mm

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. Laodpfx Aaefzb Nis Esk In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: new, Model Name Shark 281 SXI evo Lsdpfx Aogvkglja Esak

Condition: ready for operation (used), Year of construction: 1981, spindle bore: 128 mm, Centre height 550 mm, distance between centres 6,000 mm, drive power 30 kW, Heidenhain digital display, 3-jaw chuck 500 mm, tailstock, steady rest, faceplate 900 mm, leadscrew nut defective Lsdpfx Aswz Eluoa Eeak

Condition: excellent (used), Year of construction: 2007, Zeppelin Diesel Genset Type: PPO2000 - C32 Serial No.: ZPSU1023; Arr.No: 273-9683; Year: 2014; Voltage [V]: 400; Rating [kW]: 1600; Rating [kVA]: 2000; speed [RPM]: 1500; Frequency [Hz]: 50; SMU [hrs]: 0; Application: prime; Layout: Canopy; condition: pre-owned; Notes: Diesel Engine 2 * CAT C32 PPO, new Stamford HC6J alternator, with ComAp automatic Panel Inteli Compact, 2 x circuit breaker, 4000 L in two fuel tank, Jacketwater heater. L/W/H: 11 m,/ 2,3 m/ 3,2 m, weight. 26t, Import duty unpaid. Lajdoizbdaopfx Aa Eok

Condition: new, Technical specifications Two-phase mains voltage : 400 V. Lasdpfx Aaehzg Ihj Eek Mains frequency : 50/60 Hz. Max. puncture current : 9700 A. No-load voltage MAX : 2,6 V. Thickness MAX tacking 2 sides : 3+3 mm. Max electrode force : 190 daN. Arms projection : 330 mm. Nominal power X=50% : 22 kw. Nominal power X=50% : 15 kw. Power factor : 0.7 (cosphi). Intermittence ratio : 15%. Dimensions : 79 - 32 - 128 cm. Weight : 118 kg. Resistance welder (tacking machine) with column, swinging arm, with digital microprocessor control. The multifunction LCD digital panel allows to operate: in EASY mode (setting of current and tacking time); in EXPERT mode (setting of different tacking parameters) with the possibility to save up to 20 customized programs. Continuous and pulsed operation guarantees excellent welds on various types of steels. Features: adjustment of the welding current (%), welding time (cycles), pressure and speed of electrode closing choice of various welding cycle parameters (approach time, ramp time, welding time, pause time and number of pulses) easy-to-read LCD display pneumatic drive thermal protection with signaling air flow regulation for the slowing down of the arms closure Model requires cooling

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Lasdpsd E A I Ijfx Aa Eok Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: new, Year of construction: 2021, Press brake Bernardo AKPL 1600 x 40 Technical data: Laedpfxoftuyws Aa Eok Pressure force: 40 to bending length: 1600 mm distance between stand:1200mm stroke length: 100 mm Backgauge: 0 - 500 mm Projection: 200 mm table width: 150 mm table height: 760 mm Forward speed: 60 mm/sec Bending speed: 8 mm/sec Return speed: 60 mm/sec. oil tank: 130 litres Engine power: 4,0 kW width: 2050 mm depth: 1800mm height: 2030mm Weight ca.3030 kg

Condition: new, Straightening press 150 tons with electric motor and additional manual operation by a hand lever pump, especially for fine work. Versions: 30t 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 150 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 150 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- Lodpfof Sqcksx Aa Eoak The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded. Please just contact us, we will be happy to advise you without obligation.

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Working stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Lajdpfx Aaswq Dpqo Eek Control: Delem DA-65R The machine starts up, but the control unit does not respond to commands. The previous owner replaced the original AMADA control with a DELEM unit.

Condition: new, Year of construction: 2024, load capacity: 1,500 kg, Ideal for welded constructions, fixture construction, welding templates Special price promotion €2000 discount 3-D perforated table 2400 x 1200 x 200 mm Thickness of the table top 20 mm, diameter of the holes 28 mm, grid 100 mm Pivoting range 360° Height adjustment hydraulic motor 800 to 1200 mm Lifting movement hydraulic, rotation movement 360° Control with hand remote control Speed 0.5 rpm Hydraulic motor AC 2.2 KW Current AC 380 V Motor power 0.75 KW Laodpfx Aasvlplzo Esk Price includes offered perforated plate 2400 x 1200 x 200 mm Price includes accessories shown, surcharge €2000 We offer the tables in many sizes and load capacities: Load capacity 500 Kg, dimensions 1000mm x 1500mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 1000 Kg, dimensions 1000mm x 2000mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 1500 Kg, dimensions 1200mm x 2400mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 2000 Kg, dimensions 1200mm x 2400mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 3000 Kg, dimensions 1200mm x 2400mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 5000 Kg, dimensions 1500mm x 3000mm x 200mm, bore 28mm with height adjustment manually or automatically