Powder equipment

IBIX Flammspritzmaschine

Condition: excellent (used), Year of construction: 2015, I sell the 2-head UV-drying tunnel Superfici Essiccatoio UV Model: Poliedra S.Cure 1650x2 + TT1 3500. Dsdpfxsffk Ets Acyewd Year 2015. Available immediately. Repairs needed: Display, Energy power units for each two UV-units

Year of construction: 2016, condition: excellent (used), Painting booth Diana serie with horizontal ventilation Modern technology: Dust free operation Dwodpfxsygum Ro Acysd paint overspray collection system Stable spraying temprature Control box with safety function Length:16000mm Width:6000mm Height:6000mm

Year of construction: 2016, condition: excellent (used), - (dust-free operation, paint overspray collection system, stable spraying temperature, elevated drying temperature) Control box including advanced safety functions and operator-friendly software- (weather condition independent operation, elevated temperature in the drying phase)- (daylight-grade illumination, fire safety, efficient ventilation rendering operator's individual respiratory protection equipment redundant)- Low operation cost : (reduced operating costs owing recirculation of warm air in the drying phase)- (efficient dust collection, low solvent vapor concentration, low air pollutant emission)- Limited operating area requirement : (minimized production area) Length:16000mm Dwjdpfx Acjygu Smeyod Width:6000mm Height:6000mm

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. Dedpfjwzl Hxox Acyjwd * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: used, Year of construction: 2002, UV dryer, Cefla UV 2000 - Manufacturer Cefla/Sorbini - Type UV 2000 M2 / TN3000 - Year of manufacture 2003 Dwodpfjyifwpox Acyjd - Working width 1.300 mm (1.445) mm - Working height 900 + - 40 mm - Operating side right - Max. part height 70 mm - Number of tubes from above 2 pcs. - diagonally positioned tubes 2 pcs. - Suitable for mercury tubes - Suitable for gallium tubes - Tube power max. 120 W/cm - with belt transport - Length 3.000 mm - Width 2.300 mm - Height 1.500 mm - Volts, Hz 400 /50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/- 5%

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. - Upper cleaning system (with 2 motorized rubbered cross belts with brushes) Motor power: Kw 0.19 Dedpfx Aceyw Rpqsyswd - Lower cleaning system (with 2 motorized rubbered cross belts with brushes) Motor power: Kw 0.19 - Max working width mm 1500 ca.

Condition: used, Heraeus Noblelight F300SQ UV Curing System The F-series systems are robust systems with simple operation for demanding production and laboratory applications, and have proven themselves in practice over decades. The F300S irradiation system consists of an electrodeless 120 W/cm irradiation system and a matching power supply unit. This proven, economical, and modularly expandable 6-inch system allows you to fully utilize all the advantages of microwave-activated Heraeus Noblelight systems in your production process. The electrodeless irradiation bulb enables effortless switching of emission spectra in laboratory operation and represents the most reliable, stable, and efficient UV curing system on the market. F300S systems are the curing system of choice when minimal downtime, minimal maintenance, and maximum product performance are the most important performance parameters. The optional F300SQ system features a quick restart function (QRM). Advantages Simple installation Electrodeless technology More efficient and faster UV curing with high peak Simple, user-friendly control Lowest acquisition costs Robust and reliable Popular lamp spectra available Possibility of processing heat-sensitive substrates – less heat compared to mercury vapor lamps This compact system includes a 6-inch wide irradiator (lamp module), an electrodeless bulb, a power supply, and an integrated fan for cooling. Bulb length: 15 cm Power class – 120 W/cm (300 W/in) Irradiation width 150 mm Guaranteed irradiator lifespan of 6000 – 8000 operating hours No aging behavior due to reduction of emission and/or shift of the emitted spectrum High UV/low IR power. Optimized irradiator design for maximum UV power with minimal infrared. Less heat to the substrate. The power supply can be placed anywhere and connected to the irradiator module via easily installed cables. Focused elliptical reflector. Concentrates maximum UV energy on the substrate. Cooling air – integrated fan 2.7 m3 Reflector geometry: Hemispherical, focused at 53 mm (2.1 inches) from the irradiation surface Power setting – optional quick restart available Compatible with LC6B and DRS 10/12 belt conveyors Cooling: 2.7 m3 Supply via integrated fan Power supplies - P300MQ power supply Quick restart function: Maintains a low current consumption of the bulb in standby mode (up to 40 seconds) to enable a restart of the lamp at any time 24-second cooling phase On/off/standby control, safety interlocks, production line connections, production interlock, pull-out control board, complete error display, master/slave option, connectivity Power connection: 200–240 V, 18 Amps, 50/60 Hz, 1 phase Dedpfog H Sywox Acyowd Dimensions: External: WxDxH 1400 x 900 x 2200 mm Chamber: WxDxH 600 x 500 x 1100 mm Door opening: 780 x 520 mm Weight: 40.3 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We are Penope Oy and we provide solutions for industry in Finland but also worldvide. We are official Makor dealer in Finland. Technical specs: Very little used vacuum extuding machine, year 2023. IN FEEDER FOR VACUUM mod. TEP 2000 reinforced version The in feeder, which is integral part of the vacuum coater, is equipped with high adherence belt and piece side guides. It is use to properly feed profiles in the vacuum head. TECHNICAL DATA TEP 2000 for vacuum Max. working width mm 220 Working height mm 850±30 Feed speed m/min 25÷150 Feed motor power (with inverter) kW 0,55 Dwsdpfx Aetqu Dijcyod VACUUM EXTRUDING MACHINE mod. STORM WB Vacuum extruding machine for applying water base paints, designed in stainless steel plate (inox) and anti-adherence material. The machine is complete with a “cutting down” unit which allows a high reduction of the polluting emissions and a complete recovery of the excessive paint in order to reduce the consumption of paint to the minimum. PAINTING Extruding head realised in anti-adherence material. The head is complete with an adjustable profile guiding system, with paint adduction distributors. All the inner components are easily taken apart for a quick cleaning. A double diaphragm pneumatic pump with high capacity, transfers the paint from the tank to the extruding head, complete with a basket filter in stainless steel (inox) and an anti-pulse device for the interruption and feeding of the product. AUTOMATIC FILLING SYSTEM Automatic filling system for automatic decanting of the product directly from the paint drum to the tank of the machine. The system is also provided with an acoustic alarm in order to signal decrease of paint level inside the tank. Thanks to this system it is possible to maintain in circulation a minimum quantity of the product. CONTROL PANEL General electrical switch-board which is integral part of the aspiration tower equipped with control panel for the start-up and the control of the machine. Two vacuum indicating gauges for the control of vacuum degree and of loss of filter efficiency. TECHNICAL DATA STORM WB Compressed air consumption (~5 bar) nl/min 1500 Working height mm 870 +/-30 Turbines capacity (each) mc/h 470÷600 mbar 200÷250 Turbine motor power x 3 Kw 11 AUTOMATIC PRE-WASHING SYSTEM The automatic PRE-washing system allows a quicker product change or an easier maintenance of the machine. The cycle consists of the following phases: 1) Through a three-way valve the feeding pump sends the remaining product to an external container till the tank is completely empty. 2) Through hydric plant (at customer’s charge) the product tank is filled with water. 3) Turbines are activated while the previous three-way valve goes back to working position so that the feed pump can send in circulation the clean water for a defined time necessary for the washing. 4) The three-way valve goes back to discharge position and the tank is emptied by the washing water. 5) The automatic filling system activates for the new product.

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. - Top cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.75 - Bottom cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.75 - Upper (top) section lifting motor: 0.25 kW Dedpfxeyw Rqhs Acyewd - Max working width mm 1300 ca. - Built-in control panel

Condition: used, Year of construction: 2022, Operational condition. 2 units available. Dwsdpfxewctn He Acysd Ask for additional information!