Joinery

Hundegger K2-Industry

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 24,000 kg, For sale: Hundegger K2i carpentry center, year 2008. The machine is in very good condition and comes excellently equipped, including: - 13 m infeed table - Beam clamps with chain drive - 5-axis saw aggregate - 5-axis milling aggregate - Horizontal and vertical drilling - Additional end milling unit for processing rafter ends from below - Slotting unit with complete set of 8 and 10 mm chains Note: The slotting unit is rare equipment used for manufacturing trusses with concealed metal plates – a very useful feature. Csdpfsxx T Rdex Aanjgl We can install this machine – we already have experience in installation and commissioning. Additionally, we can offer implementation services, meaning software training and assembly/mounting. The machine is in very good technical condition, regularly serviced and meticulously maintained, and is currently in operation. We are selling because we have purchased a much newer model. Note: Available for collection February–March.

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Codewclkyspfx Aanegl Consisting of: - Transfer chain to finger-jointing press (foldable) - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal - Stacking machine - Strip magazine not for sale - Package cross conveyor The machine is in very good condition and has had very little use. The machine is still assembled but available immediately.

Condition: good (used), Year of construction: 2011, Fully automatic wood infeed with feed roller conveyor Extension of transverse feed conveyor and feed roller conveyor for timber lengths up to 13 m Transverse loading and feed conveyor Under-table swing cross-cut saw Universal 4-axis milling unit (UF4) Combination support for vertically operating tools Drilling unit 2.2 kW Combination support for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse grooving mill Marking device at the rear (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand system" Cedjwuppwepfx Aanogl Electronic control with EKP software Roller conveyor for wood outfeed incl. extension (without drive) Component ejector 5-arm wood rack Safety devices and protective guards

Condition: used, functionality: fully functional, pressing force: 200 t, table width: 300 mm, cutting height with scoring (max.): 100 mm, milling spindle length: 250 mm, Equipment: 1 GRECON feed transfer with accumulation of 4 to 5 cleaned lamellas of different lengths for finger-jointing 1 GRECON double finger-jointer for deep teeth (for glulam beam production) 1 180° transfer with two-component gluing system 1 GRECON finger-jointing press 1 CNC-controlled cross-cut saw 1 outfeed table Csdswz H Anjpfx Aanogl

Year of construction: 2023, condition: used, Used machine Cedpfxexavtke Aanogl Year of manufacture: 2023, delivered in 2024 Condition: as new, machine is in original packaging and has not been commissioned Equipment and technical data: Infeed Table / Cross Conveyor: - Number of strands: 6 × Supergrip timing belts - Pitch: 650 / 650 / 850 / 1500 / 1500 mm - Length: approx. 1.8 m - Drive: geared motor, 1.5 kW - Minimum workpiece infeed length: 0.8 m - Function: Automatic transfer of raw material by lowering level to the infeed table Infeed Table: - Smooth sliding table with sliding plastic for damage-free feeding of raw material by servo pusher into the machining zone - Support width: approx. 200 mm BLOCKHAUS 4F-SERVO (main milling unit): - Machining dimensions: 140 × 200 mm - Maximum horizontal milling depth top: 60 mm - Maximum horizontal milling depth bottom: 35 mm - Maximum vertical milling depth: 95 mm - Milling spindles: Ø 30 mm - Horizontal milling tools: 2 × D = 220 mm × W = 120 mm - Vertical milling tools: 2 × D = 280 mm × W = 120 mm - Motor power: 4 × 4.0 kW - Feed: horizontal and vertical via SERVODRIVE, infinitely variable via software - Milling depth adjustment: spindle with digital counter - Workpiece clamping devices: vertical pneumatic, horizontal pneumatic - Extraction: below-floor hopper Ø 160 mm (pit by customer required) - Control: IPC / PLC / IITO software - Machine frame prepped for end tenon or dovetail milling, drilling unit and crosscut saw - Machine enclosure: fully closed, with swiveling safety hood (gas strut, viewing window) - Electrical control cabinet on base, cable carrier 3.0 m Option i (automatic milling depth adjustment for 4F milling unit): - Four additional NC-controlled servo axes for automatic positioning of the 4F tools - Control via IPC / IITO software - Function: automatic milling depth adjustment with ±0.1 mm tolerance - Extended machining capabilities: - individual grooves and millings on four component sides, - recesses and markings for window and door openings, - double and triple joints, - half corner joints (e.g. for top and bottom log beams) Tools: - 2 × 3-piece groove cutter D 220 mm, width 21–65 mm, LM - 2 × 3-piece groove cutter D 280 mm, width 21–65 mm, LM - 1 × end tenon cutter D 240 mm × 20 mm - 1 × dovetail cutter D 40 mm, width 15 mm Combination End Tenon & Dovetail Milling Unit: - 3-axis milling unit for production of end tenons and dovetail joints - End tenon cutter Ø 240 mm × width 30 mm - Max. milling depth for end tenon: 40 mm - Dovetail width variable - Motor power: 4.0 kW - Speed: inverter-controlled, max. 4,500 rpm - Feed (DT.Y axis): SERVODRIVE, infinitely variable - Height adjustment (DT.Z axis): SERVODRIVE - Rotation adjustment (DT.R axis): SERVODRIVE - Workpiece clamping device: vertical pneumatic - Minimum beam thickness for longitudinal connection: 80 mm - Control: automatic via IPC / PLC / IITO software Horizontal Drilling Unit with Drill Guide (BGD SERVO): - Max. drilling diameter: Ø 30 mm - Drill Ø = 20 mm included in delivery - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: SERVODRIVE, infinitely variable - Height adjustment (Z axis): SERVODRIVE, digital counter - Workpiece clamping device: vertical pneumatic

Condition: used, functionality: unexamined, Clamping range: max. 240 mm Cutting height: max. 450 mm Cgedpfx Ajw Npk Asanol Cutting depth: max. 380 mm Motor power: 2.2 kW

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 11441, At the moment we are working with the following version: Cgsdpfxewvih Ao Aansl 9.23.12.102733-12 The equipment of the K2: a 4-axis universal milling machine 2 drilling rigs a finger cutter below a slotter Hydraulic beam turning station Machine is fully working, can be visiited upon agreed time. avaible from 30/11/2025 Disassembly from our company and loading to truck, and is included in the price. Sale is as a used machine with exclusion of any warranty.

Condition: excellent (used), Year of construction: 2004, Hundegger K2-5 five-head carpentry center. The machine is in perfect condition after service without backlash. Possibility to see it live during operation. Please contact me Cgodpfjwrd R Rjx Aanjl

Condition: like new (used), Year of construction: 2015, I sell the automatic CNC working centre for wooden constructions Hundegger K2i. Almost new machine. Year 2011. Under-table rotary saw with saw blade from 750 mm to 800 mm, 360 degree rotation, servohydraulic tilting 0 – 65 degrees universal 5-axis unit equipped with cylindrical milling cutter, end mill and end mill, milling head diameter 350 mm x 100 mm end mill combi support for at least 5 tools with horizontal drilling device up to power from 2.5 to 3.0 kW, drilling diameter max 24 mm, drill length min 460 mm, machining depth min 300 mm combi support for at least 5 tools with horizontal drilling device up to power from 2.5 to 3.0 kW, drilling diameter max 24 mm, drill length min. 460 mm, machining depth min. 300 mm positioning and gripping of the material using arms, which, while the material is measured, transported to the desired location, the arms keep the processed element as close as possible to the tool that processes it for stability. the processed material can be rotated automatically tolerance +/- 2 mm at a length of 13 m Codpsxtxkxjfx Aanegl Fully automatic wood input with input roller track and input and sliding cross conveyor K2i: Under-table tilting cross-cut saw K2i: Universal milling unit – 4-axis (UF4) K2i: Kombisupport for vertically working tools K2i: Drilling device (2.2 kW) – vertical drilling direction K2i: Kombisupport for horizontally working tools K2i: Drilling device (2.2 kW) – horizontal drilling direction K2i: Marking tool (rear or on the user side) K2i: Fully automatic element rotation – hydraulic K2i: Transport and positioning system “two-hand system” K2i: Electronic connection K2i: Roller track for removal wooden elements with a pusher K2i: 5-arm storage table K2i: Safety device K2i: Higher quality upper surface of the machine K2i: Extension of the K2i frame to 13.56 m K2i: 5-axis universal milling unit - UF5 (increase to 4-axis) K2i: Remote maintenance (including portable video camera) K2i: Dovetail milling machine (with rotating knives) 60x28x16.5 Suitable for wooden house constructions! Available immediately.

Condition: ready for operation (used), Year of construction: 1991, operating hours: 0 h, functionality: fully functional, machine/vehicle number: 00000000001, Approx. 18m long Already dismantled Local charging possible Fully functional Cjdsvrv Trepfx Aanegl