Machining center

HOMAG BOF 211/40/AP

Condition: used, machine/vehicle number: 005521, X axis working area: 4000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 24 Lhodpfx Asvctlgoc Asl

Condition: excellent (used), Year of construction: 2021, operating hours: 140 h, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 29 A, working width: 3,050 mm, We offer this very good HOMAG DRILLTEQ V-500 throughfeed drilling machine, year of construction 2021. Working dimension X 3.050 mm Working dimension Y 1.250 mm Working dimension Z 80 mm Number of milling spindles 1 Main motor power 10 kW Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Tool changer positions 4 Vertical drilling spindles 15 Horizontal drilling spindles in X 6 Horizontal drilling spindles in Y 4 Groove saw 90° turnable Vertical working surface Machine table Feed-through technology Special workpiece clamping system clamp gripper Barcode reader Safety device enclosed cabin Control Homag powerTouch, HOMAG POWER CONTROL Software Lsdpoylp Slefx Ac Aehl HOMAG WOODWOP 7.2 Conformity marking CE mark Category: Machining centre Type designation: DRILLTEQ V-500 Subtype: OPTIMAT BHX200 Machine number: 0-250-73-7195 Wiring diagram: 0-250-73-7195 Supply voltage: 400Y/230 V Neutral conductor: yes Phases: 3 Frequency: 50 Hz Maximum operating full load current: 29 A Fuse rating: 35 A Control voltage: 24 V If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,550 mm, workpiece height (max.): 40 mm, number of spindles: 30, travel speed (max.): 80,000 mm/min, TECHNICAL DETAILS Travel range X-axis: 4,175 mm Travel range Y-axis: 1,550 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Maximum workpiece height: 40 mm Number of suction traverse beams: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X-direction: 10 Total number of spindles: 30 Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Ljdjyttcwjpfx Ac Ajhl Liquid-cooled Saw unit Tool magazine 1 Number of slots: 18 Tool magazine 2 Number of slots: 10 EQUIPMENT NC positioning of suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for installation, securing, and usage of the machine at the destination. External reference: 7350

Condition: used, Year of construction: 2023, functionality: fully functional, total height: 1,800 mm, input voltage: 400 V, total width: 2,830 mm, total length: 2,300 mm, overall weight: 2,500 kg, working width: 1,950 mm, operating pressure: 6 bar, Equipment: documentation/manual, Kolbus Autobox BX200 with Magazine Feeder Boxmaker for producing customized folding cartons Magazine feeder for automatic sheet infeed Fully automatic setup via touchscreen Processes corrugated board up to a maximum of 10 mm Slotting knife width: 7 mm Remote service enabled DEMO machine – LIKE NEW! Ledsyaa Rnopfx Ac Ajhl

Condition: new, Ruchser Glass bead nailer "2 P Jumbo automatic E.C." - new - Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Lhodpfjvnh T Nox Ac Asl Clamp corner joining machine 2P Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation; With angle system, clamping device from above and front Pressure can be regulated separately. Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. ----- Price in this version on request! Plus packaging/shipping ----- Pictures show Clamp corner joining machine 2P inlcuding the option of movable work table (please find details as follows under additional prices) Additional prices: ----- Movable work table height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugged in 1000 mm long, 2 pieces swiveling and sliding Support bars 1000 mm, support bars covered with felt, 4 swivel castors, 2 of which have a stop device. ----- Additional price: 1.311,00 euros net Brackets: packages 15 mm brackets (package of 2000): Price 22.00 euros 12 mm brackets (package of 3000 pieces): Price 32.00 euros 10 mm staples (package of 3000 pieces): Price 32.00 euros Dimensions and weights ----- Jumbo Automatic E.C 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. plus statutory VAT Ex works plus packaging and shipping (technical data according to manufacturer - no guarantee!)

Condition: excellent (used), Year of construction: 2008, Machining center Manufacturer: Weeke Type: BHX 500 Year of manufacture: 2008 Machining dimension X: 2,500 mm Machining dimension Y: 1,300 mm Machining dimension Z: 4 - 80 mm Lhsdpfx Acoh E Sghe Ael Number of routing heads: 2 Number of drilling heads: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Notch saw: can be swiveled 90° Speed, X-axis: 130 m/min Speed, Y-axis: 80 m/min Speed, Z1-axis: 50 m/min Speed, Z2-axis: 27 m/min Rotational speed: 18,000 rpm Dismantled – available immediately

Condition: used, Year of construction: 2018, operating hours: 10,347 h, total height: 2,400 mm, total length: 7,000 mm, total width: 2,400 mm, Colour: Grey Empty weight: 3.450 kg - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes Lhjdpfx Aoxtbgpsc Asl - Operating hours: 10347 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Min. spindle speed [rpm]: 600 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 8.5 - - C-axis present: Yes - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 2.64 - └ Horizontal drill spindles [pcs.]: 10 - └ Vertical drilling spindles [pcs.]: 24 - Saw unit present: Yes - Tool changer positions [pcs.]: 25 - System/software: Xilog plus - Safety feature: Bumper guard - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Picchio - └ Year of manufacture: 2018 - └ Main motor power [kW]: 2.5 - └ Capacity [m³/h]: 108 - └ Connection diameter [mm]: 80 - └ Oil free: Yes - CNC options: Laser for vacuum pod positioning, Offcut conveyor, Barcode reader - Working range X [mm]: 3110 - Working range Y [mm]: 1320 - Z-axis working range [mm]: 180 - Voltage [V]: 400 - Current consumption [A]: 47.2 - Fuse [A]: 63 - Power [kW]: 10.0 - Transport dimensions: 7000mm x 2400mm x 2400mm (l x w x h) - Transport weight [kg]: 3450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, machine/vehicle number: 008116, Max. machinable height: 120 mm Max. forward feed speed: 25 m/min Lhedpfx Acsw Iddze Aol Operator shafts number: 6

Condition: used, machine/vehicle number: 007986, Max. panel width: 1000 mm Ledpfx Acjx A Tggo Aohl Max. panel length: 2000 mm Length of conveyor: 3500 mm Panel return for edgebander: Right

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis Goose-neck type Numerical Control Power Control - Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails- No. 6 Support rails Front emergency carpets LASER system on X-axe for the rails positioning and on Y-axe for the vacuum pods positioning Automatic Tools Changing System No. 2 Tools storage plates W8 (No. 8 rear spaces) + (No. 8 lateral spaces) Max. useful working area (X - Y - Z) mm 3130 x 1250 (1550) x 100 (150) No. 2 Working areas - 1 x Vacuum pump (capacity 70 m3/h) Motorized carpet to evacuate chips and wastes Separate electric and command cabinet Total installed power A 32 WORKING GROUPS (TOP): No. 12 Independent vertical boring spindles (High Speed 7500) No. 6 Independent horizontal boring spindles (No.4 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,3 Circular Grooving Saw (tiltable 0°- 90°) diam. (mm) 125 (N1 X-Y 90°) No. 1 Vertical electro-spindle: HSK63 (KW 9) OPTIONAL: Drilling Group with No. 4 horizontal boring spindles (Crosshead) PROFESSIONAL BARCODE READING SYSTEM Ledeyxn Tiepfx Ac Aehl