Bandsaw HOLZKRAFT HBS 433 - Exhibition machine -

HOLZKRAFT HBS 433

Condition: new, NEWPrecision band saws for theambitious craftsmenA particularly quiet and precise run thanks to onetorsion-free machine housing and onesolid base made of sheet steelGray cast iron saw table with precisely groundand polished surfaceComfortable laser device for cutting linemarkSaw band quick clamping via eccentric leveron the back of the machineStandard with two speedsPrecise 3-roller saw band guides,standard top and bottom from HBS 351Fast cutting height adjustment viaKnob and rack with millimeter scaleSmooth-running aluminum rip fence withEccentric quick release and magnifying glassStandard miter stop,adjustable on both sides by 60 °Safety switch for automaticShutdown when the door is openedEquipment detailsPrecision guidanceHBS 351 with 3-roller saw band guide at the topand belowWith leadership rolesEasily adjustablePractically maintenance-freeQuick release systemEccentric quick release leverThe basic voltage setting is therebynot h integrated saw band tension indicatorFlywheelsFlywheels with a special coating (HBS 351)The basic voltage setting is made via themade at the top of the rotary tableThe gray cast iron saw table is on a Wipp holder saw table inclination can be from -10 ° to + 45 °can be set play of the blade tensionSaw band tension display fordifferent saw band widthsReadable from the outside by a in the doorintegrated viewing windowPrecision guidanceFrom HBS 431 with precision saw band guidewith leadership rolesFine and fine adjustment above and belowTwo speeds via V-beltselectable adjustmentBalanced cast iron flywheelsgrant a quiet runAluminum rip fenceWith quick-action eccentric clamp, particularly easy and precise to moveEasy to read millimeter scale and integratedMagnifying glassSaw table double rocker bracketThe table inclination from -10 ° to + 45 ° takes place overprecise and smooth rack and pinion guidancewith pommelFor safety reasons, from 20 °a holding device / a stop may be attached,to prevent the wood from slipping!Technical specifications:Dimensions and weightsLength (product) approx. 820 mm Height (product) approx. 1852 mmWidth / depth (product) approx. 730 mmWeight (net) approx. 130 kgSuction connectionExtraction nozzle diameter 2 x 120 mmWork table (s)Working table length 610 mmWorktable inclination -10 - 45 °Working table width 431 mmExplanation of worktable inclinationFor safety reasons, a holding device / a stop must be attached from 20 ° to prevent the wood from slipping!Working table height 950 mmElectrical dataConnection voltage 230 VMains frequency 50 HzPhase (s) 1phOutput power 1.5 kWCurrent type ACCutting areasCutting height max. 90 ° 270 mmCutting width max. without stop 410 mmCutting width max. with 370 mm stopSaw bandSaw band speed (s) 900/450 m / min3-roller saw band guidePrecision guidance above and belowSaw band length 3345 mmscope of deliveryAngle stop ± 60 °Laser device for cutting line marking1 x saw band wood 3345 x 6 x 0.65 mm Njdpjvwgbdefx Agwocp

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Equipment and technical specifications: Maximum professional configuration, optionally with Tersa or spiral cutter block Equipped with TERSA cutter block for tool-free, second-fast planer knife changes TERSA planer knife system allows for exceptionally quiet operation Helically serrated steel infeed roller for consistent and uniform material feed Material feed with two speeds, powered by a separate motor Extra-long surfacing tables for easy and precise dressing of workpieces Work tables made from annealed and stress-relieved cast iron, robust and permanently flat Simultaneously rearward-opening surfacing tables for minimal setup times Thickness table adjustment via handwheel with numerical height display High machine weight ensures maximum precision and vibration-free operation Powerful industrial motor Robust steel/cast iron construction Chip removal starting from 0.2 mm (at minimum workpiece thickness of 3 mm) due to helically serrated feed roller (ideal for economical planing of precious hardwood) Quality – Made in Europe Equipment details: Tersa cutter block No adjustments or screwing required Blade changes in seconds Self-locking Nedpfxew Rhkqj Agwjcp Exceptionally quiet operation Material feed: Helically serrated steel infeed rollers for consistent wood feed without markings Multiple teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Permanently mounted extraction hood: With the fixed extraction hood, there is no need to change the extraction hose during retooling This saves valuable working time Simultaneous opening of surfacing tables: Both surfacing tables can be tilted up together, spring-assisted, for fast and convenient conversion to thicknessing mode in seconds Thickness table adjustment: FS 41 elite s with thickness table adjustment by handwheel and integrated indicator The thickness table is guided on four large-dimensioned spindles providing maximum stability in all operating conditions. A special lifting device keeps the table position perfectly stable even without locking. Anti-kickback devices: Massive anti-kickback devices prevent kickback of workpieces The 4-knife cutter block ensures optimal planing results Anodized aluminium surfacing fence: Large size (1200 x 150 mm) Easily adjustable Tiltable from 90° to 45° with scale Supplied with auxiliary fence for safe planing of narrow workpieces Digital version: With electric thickness table height adjustment and digital display Scope of delivery: Jointing/edge fence with round bar guide 2 feed speeds Tersa cutter block Technical Data Overall surfacing table length: 2200 mm Surfacing infeed table length: Surfacing table height: Surfacing working width: 410 mm Surfacing maximum cutting depth: 5 mm Surfacing fence dimensions: 1200 x 150 mm Surfacing fence tilt range: Thickness table dimensions: 775 x 410 mm Min. thicknessing height: 3 mm Max. thicknessing height: 240 mm Min. thicknessing workpiece length: Thicknessing feed speeds: 6 / 12 m/min Cutter block speed: 5000 rpm Cutter block diameter: 95 mm Number of planer knives: 4 pcs. Electric...

Condition: new, Year of construction: 2026, Holzkraft HBS precision wood band saws for the craftsman Top quality, workmanship and price-performance ratio Particularly quiet and precise running thanks to a torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, with a precisely ground and polished surface. Quick saw band tensioning via eccentric lever on the back of the machine Nodpovk Sd Defx Agwscp Standard with two speeds Precise 3 roller saw band guides, standard at the top and bottom from HBS 351 Quick cutting height adjustment via rotary knob and rack with millimeter scale Smooth-running aluminum parallel stop with eccentric quick clamp and magnifying glass Standard miter angle stop, adjustable by 60 degrees on both sides Aluminum parallel stop with eccentric quick clamp Technical data: Work table dimensions: 610 * 431 mm Cutting speed: 900/450 m/min Flywheel diameter: 430 mm Max. cutting height: 270 mm Max. cutting width with stop: 370 mm without stop: 410 mm Saw band length: 3345 mm Precision guide 3 rollers: top/bottom Saw table inclination: -10 degrees, + 45 degrees Motor power: 1550 watts/400 volts Weight: 130 kg Dimensions in mm: 680*512*2048 Extraction nozzle diameter: 2*100 mm Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2023, functionality: fully functional, center width: 390 mm, center height: 310 mm, overall weight: 61 kg, input voltage: 230 V, spindle speed (min.): 50 rpm, spindle speed (max.): 3,500 rpm, spindle mount: MK 2, power: 0.75 kW (1.02 HP), - Fully cast headstock, tailstock and support for smooth running. - User-friendly operation of the cast iron hand rest. - Induction motor with high torque even at low speeds. - Digital speed display. - Hardened steel edge of the hand rest. - 24-step division for locking the workpiece. - Storage compartment means you always have your tips to hand. - Drive-out mandrel and wrench for tightening the clamping disk. - Pre-drilled holes for lighting the headstock. - Easy mounting of accessories: stand, extension, lighting and mobile base frame. - Machine bed width is 160 mm! Nsdpfx Agstuuv Newecp Medium-sized LAGUNA 1216 lathe is characterized in particular by its robust elements: Cast iron headstock, tailstock, precisely ground bench bed and tool rest with resistant edge made of hardened steel. Another highlight: ergonomic control panel made of anodized aluminium with duralumin speed control. Working speeds: 50-525, 325-1750, 650-3500 rpm. Stepless speed control with duralumin regulator and change between three gear ratios with a simple lever mechanism. The motor technology ensures high torque even at low speeds. Locking the tailstock at the rear: it does not interfere with work, but is still easy to reach. Ergonomic handles with eccentric lock for a very firm grip. - Type: REVO 1216 - Recommended use: Professional production - Power (230 V): 750 W - Speed: 50-525, 325-1750, 650-3500 rpm - Max. Machining diameter over guideway: 310 mm - Center distance: 390 mm - Spindle thread: M33 × 3.5 mm - Headstock / tailstock taper: MK2 / MK2 - Tool rest / tailstock bore: 17 / 17 mm - Quill adjustment: 63 mm - Hand rest shank size: 25.4 mm (1") - Length × width × height: 750 × 226 × 442 mm - Weight: 56.3 kg - Length x width x height: 750 × 226 × 442 mm - Weight incl. packaging: 61 kg - Packaging dimensions: 920 mm × 380 mm × 520 mm Scope of delivery: - Driver tip - center point - face plate - Hand rest - Punch with brass tip - Key for spindle lock

Condition: new, Year of construction: 2025, Roller diameter: 640 mm Stand projection: 620 mm cutting depth: 400mm table tiltable: yes -0 to + 15° Table size: 870 x 620 mm belt speed: 1660m/min Motor power: 2,2 kW / 400V Motor brake: yes / automatic Suction connection: 2 x 120mm Nsdpfxegtdpmo Agwocp Machine length: 1190 mm Machine width: 780 mm Machine height: 2063 mm Weight: 320 kg

Condition: ready for operation (used), Year of construction: 1978, functionality: fully functional, turning diameter over cross slide: 960 mm, turning length: 10,000 mm, turning diameter: 1,300 mm, spindle bore: 160 mm, Lathe Wohlenberg model M 1000 BSN in excelent condition. Machine were retrofited with Siemens 802. Machine is under power and it can be tested.Two steady rest Nodpfx Agoxprrbjwocp

Condition: good (used), Spindle diameter: 80 mm Spindle nose: SK50 Spindle speeds: 11 - 1000 RPM X-axis movement: 1700 mm Y-axis movement: 1800 mm Z-axis movement: 1800 mm Spindle out (W-axis): 710 mm Table size: 1100 x 900 mm Elbo Digital readout: On Y-axis and Z-axis Featured with: - Turning table - Toolholders Nedpfx Agephl Ecowjcp Spindle engine: 7,5 KW Machine LxWxH: 5100 x 2650 x 3300 mm Machine weight: 10 Ton

Condition: used, details on request Ncjdpfx Aodbmyzsgwjp

Condition: new, Band saw Bernardo HBS 460 N - 400 V Technical Specification Cutting width 465 mm Cutting height 280 mm Sawband dimension 3607 x 25 x 0.6 - 3 ZpZ Saw widths 9.5 - 25.4 mm Cutting speed 420 / 840 m/min Table dimension 480 x 630 mm Table height 970 mm Saw table inclination -5° to 45° Suction connection of 2 x 100 mm Engine power S1 100% 2.2 kW (3.0 hp) Motor recording power S6 40% 3.0 kW (4.0 hp) Voltage 400 V Machine dimensions (W x D x H) 1050 x 800 x 1950 mm Weight approx. 162 kg Delivery • Saw band • Longitudinal stop with magnifying glass • Miter stop • Drive wheels made of aluminium Nsdpfx Aged N S Urjwecp • Ball-bearing saw band guide • Motor incl. brake • Sliding stick • Operating tool

Condition: excellent (used), Angular sawing plant Numerical Control OSI Plus - Software Optiplanning N. 2 Pre-loading roller tables (mm) approx. 4500 x 2200 each Lifting table (mm) 4500 x 2200 1° Rear-pusher, with No. 5 clamps/grippers Turning device (rotating unit) at 90° 1° Panel saw (longitudinal) max. cutting width (mm) 4500 Max blade projection (mm) 152 Ncodpfx Ageukhd Aowep Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 ( Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min Cutter for shredding trimmings 2° Rear-pusher, with No. 10 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 (Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min No. 2 Front supporting tables with Air blowing system mm 2200 x 1500 Automatic unloader (bridge) for cut panels "RBO (BIESSE)" Mod. Lifter with 6 stacking stations