High-speed radial drill

HKS , HKS 32 MG

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, year of last overhaul: 2025, RepairFIT by Dornhöfer The Difference. Including installation and commissioning! Technical details of the machine: Year of manufacture: 2008 Control: Heidenhain iTNC 530 Travel range: X-axis (mm) 2,500 Y-axis (mm) 1,250 Z-axis (mm) 1,000 Rotary table size: Length (mm) 1,000 Width (mm) 1,000 Spindle speed range: 15,000 rpm Feed rates: X, Y & Z axes (mm/min): 10 - 10,000 Nwjdpfx Agov Rw Uushop Max. rapid traverse speed X, Y & Z axes (mm/min): 25,000 Milling head: Automatic milling head, vertical Tool holder: HSK 63 A Main spindle drive power: 100% duty cycle KW25 - Chip conveyor - Cooling lubricant system - 3D thermal expansion compensation - Portable electronic handwheel Heidenhain HR 410 with 3m spiral cable - INA RUE 45 linear guideway system on all linear axes with central lubrication - Complete splash guard enclosure RepairFIT is our proven offering for a profitable entry into our product lines. The machines available in this line are procured by us following a rigorous selection process and subjected to a thorough inspection (deep dive check). After intensive cleaning, any obvious defects and faults identified are professionally repaired by our expert service team.

Year of construction: 1998, condition: good (used), machine/vehicle number: 3862-8063-564, Offer 23036 Technical data: - Drilling capacity into solid steel ST 60 32 mm - drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 Nwjdpfekzg T Rox Aghep - Drilling spindle holder MK 4 - quill stroke 150 mm - 12 drilling spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min / max distance spindle - table 310 / 610 mm - drilling radius min / max 400 / 1200 mm - table height 720 mm - table size 1200 x 500 mm - drive 400 V / 1,6 / 2,9 kW - space requirement approx. W 1200 x H 2800 x D 2300 mm - weight approx. 1500 kg - with: - thread cutting device - hydr. columns + jib clamp - coolant device - T - grooves vertical at the rear side of the machine

Condition: new, The bSander 75.200 & 150.200 are machine sanders for sanding pipe faces and profile ends, for edge sanding and for face sanding on the upper surface of the system. Nsdpfxed Dp Aas Aghowp bSander 150.200: Belt dimensions 150 x 2000 mm Belt speed 29 m/s. Drive power 4.0 kW//3x400 V//50Hz Dimensions L x W x H 700 x 530 x 1130 mm Weight 90 kg bSander 75.200: Belt dimensions 2000 x 75 mm Belt speed 29 m/s Drive power 3.0 kW//3x400 V//50 Hz Dimensions L x W x H 700 x 490 x 1130 Weight 72 kg Price on request

Year of construction: 1968, condition: good (used), machine/vehicle number: 12314, Offer 22326 Technical data: - Drilling capacity in steel ST 60 35 mm - drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 4 - drilling spindle stroke 170 mm - throat 345 mm - rotary table with 2 T-slots 550 mm - max. distance table - drilling spindle 650 mm - max. distance base plate - drilling spindle 1000 mm - feeds 0,09 - 0,16 - 0,28 mm/rev. - AZ gearbox stepless with gearbox - drilling spindle speeds infinitely variable 40 - 720 rpm - right. - counterclockwise rotation Nwjdekt Nqqopfx Aghop - drive 400 V / 2,5 kW - illumination - coolant equipment - Space requirement approx. W 750 x H 1950 x D 1000 mm - Weight approx. 700 kg

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev Nwedpfx Agsirax Uehjp -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: used, Year of construction: 2009, Spindle head diameter: 75 mm Spindle taper: Morse 5 Nedpfxovwbccs Aghswp Spindle stroke: 350 mm Min./max. overhang from the surface of the casing to the spindle axis: 1170/2070 mm Min./max. radius at the extreme positions of the spindle: 1370/2270 mm Min./max. distance of the spindle head in the vertical position (with the spindle retracted) from the floor: 305/1555 mm Min./max. distance of the spindle axis in the horizontal position from the floor: 295/2725 mm Vertical adjustment of the arms (stroke): 1250 mm Horizontal adjustment of the arms (travel): 900 mm Arm rotation: 360° Headstock rotation: 360° Headstock rotation from the horizontal position up/down: 90° / 90° Slide travel along the bed (extended): 2500 mm Shell diameter: 400 mm

Condition: used, Year of construction: 1987, bore capacity in steel (diameter) 50 mm throat 385 mm bore stroke 240 mm taper MK 5 MK table-size 660 mm feeds 0,1-0,14-0,2-0,28-0,4 . mm/U turning speeds 40 - 800 U/min total power requirement 4,0 KW weight of the machine ca. 1,4 t dimensions 1,2 x 0,8 x 2,59 m Pillar drill with: Nwsdpjw Tdx Nofx Aghsp - Feed - Left/right rotation - Variable spindle speed - Coolant pump

Condition: used, functionality: fully functional, machine/vehicle number: 294, spindle speed (max.): 1,250 rpm, spindle speed (min.): 40 rpm, total height: 2,300 mm, drilling capacity: 50 mm, total width: 970 mm, total length: 1,300 mm, spindle mount: MK 5, drilling depth: 240 mm, table width: 870 mm, table length: 670 mm, overall weight: 1,200 kg, Dear Sir or Madam, We are happy to answer any questions. This sale is made without any warranty or guarantee. Errors and typos cannot be ruled out. Please check the information in the PDF. No returns accepted. Nwodpfxsv T Auro Aghsp

Condition: used, turning diameter / mm turning length / mm swing diameter over bed slide / mm Technical data - Model 230 DIMENSIONS Centre height on the bed: 230 mm Spacing between centres: 1000-1500 mm 2000-2500 mm 3000 mm Bed width: 360 mm Largest turning Ø: on the bed: 465 mm on the carriage: 278 mm on fixed steady rest: 200 mm on travelling steady rest: 160 mm CROWNING Width of the crank: 300 mm Distance between face plate edge and offset: 150 mm Largest turning Ø on the offset: 690 mm SPINDLE Ø of front bearing (inside): 110 mm Ø of rear bearing (inside): 95 mm Ø of hole: 77 mm Mounting Type - Cam Lock: 6" Internal spindle taper - taper: 1 : 20 Spindle taper - C. M. - N.: 5 Speed ranges: Slow feed - rev. 1': 15÷1000 Normal feed - rev. 1': 22÷1500 Nwjdjwz Rywspfx Aghop Fast feed - rev. 1': 30÷2000 FEEDS (without gear change)-N.: 108 Longitudinal feed range at revs. : 0.04÷4 mm Transverse feed range at revolution: 0.02÷2 mm Lead screw - Ø: 40 mm Lead screw pitch: 12 mm THREAD (without gear change) Metric - N. 54 to: 0.5÷28 mm Module - N. 54 to Module: 0.25÷14 Whitworth - N. 54 to Wt. x 1": 56÷1 Diametral Pitch - N. 54 to D.P.: 112÷2 Inch - N. 54 to Inch: 1/32 ÷ 13 3/4" SPINDLE PIT Quill Ø: 75 mm Quill barrel: 220 mm Quill taper - vices N. 5 POWER Main motor - HP: 10 Pump motor - HP: 0.25 WEIGHT approx. - kg 2000-2220 2530-2720 2920 ON REQUEST Main motor - HP

Condition: good (used), Machine is in good working condition. Nwedoqzypmepfx Aghjp