Automatic turret lathe

HESTIKA HR 32

Condition: reconditioned (used), Year of construction: 1999, Universal Tool Milling Machine TOS FNGJ 32 3-axis Heidenhain digital readout Year of manufacture: 1999 Travel: X 600 Y 400 Z 400 mm Spindle speed range: 40 – 2000 rpm Supplied with the following accessories: Fixed angle table, 800 x 400 mm clamping surface Vertical milling head Dodpfxsxc It Is Afnjcc Extendable quill Various SK 40 tool holders Safety guard Chip tray Machine lamp Automatic central lubrication pump for X, Y, Z axes Coolant system 4 machine leveling pads

Condition: good (used), Year of construction: 2013, BAR CUTTING MACHINE TRAUB A 25 2013 Turning length: 65 mm Total power requirement: 2 kW Machine weight: approx. 0.7 t Space requirement: approx. 1200 x 700 x 1600 mm Thread length: 40 mm Dcsdpfowc Amxsx Afnsc Max. part length: 65 mm Motor speeds: 1400-2800 Bar loader available!

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 Dsdeu Uu S Tspfx Afnscc stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg Year of construction: Approx. 1970

Year of construction: 1985, condition: used, workpiece diameter 25-90 mm threading length 3000 mm Dedpfxetzdyzj Afnjcc thread pitch 2-16 mm total power requirement 25 kW weight of the machine ca. 10,5 t dimensions of the machine ca. m

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Dodpfxjh Hvk Ae Afnecc Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Condition: new, Year of construction: 2025, * 250 lt Net Volume * Dosing pump included. * Highly wear resistant P.U.Lining (90 Shore) * High performance three phase current drive motor. Dedpfeh I N Udox Afnocc * Changeable valf for the wastewater decharging * Main swicth and emergency stop switch. * Timer and working hours timer * Special construction of control panel(EU Standarts) included

Condition: ready for operation (used), Year of construction: 1999, Takisawa EX-108 2 Axis CNC Turning Centre FANUC 21i-T Control Max’ Turning Ø 320mm X Axis Travel 180mm Spindle Bore 52mm 12 Station Block Turret 7.5kW Spindle Motor Spindle Range to 3500rpm Tool Setting Arm Collet Chuck Machine Multifeed ML1 Barfeed Separate Transformer Electronic Handwheel Swarf Conveyor Turret Tooling as photographed Year of Manufacture 1999 For sale with Jet Machinery Ltd Jet Machinery Stock No: #78879 Djdpewnd Iujfx Afnecc Machine Serial Number: NA Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use

Year of construction: 2005, condition: used, Empty weight: 10.000 kg Dimensions (LxBxH): 220 x 270 x 250 cm Price: On request Lots of accessories! Includes - probe Includes - 3 vices - Year: 2005 - Documentation available: No Dcsdpfsxdc Szex Afnec - CE marking present: Yes - CE certificate present: No - Serial number: 16286 - Drive system: CNC - Power [kW]: 22.0 - Number of axes [pcs]: 2 - X-axis travel [mm]: 550 - Y-axis travel [mm]: 410 - Z-axis travel [mm]: 460 - Table length [mm]: 860 - Table width [mm]: 400 - Tool holder: BT40 - Max. spindle speed [rpm]: 15000 - Options: Probe - Transport dimensions: 2200mm x 2700mm x 2500mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1970, Weiler lathe with tailstock Dsdohtnu Tspfx Afnecc

Condition: good (used), Year of construction: 1961, turning diameter over bed 700 mm turning diameter over slide rest 460 mm turning length 1800 mm spindle bore 90 mm dimensions of the machine ca. 5,4x2x1,9 m Dedoru Aymepfx Afnocc total power requirement 32,1 kW