Vertical machining center

HERMLE C 1200 V

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 16065, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 16,000 rpm, The seller can handle the disassembly and loading for €1,250! TECHNICAL DETAILS Travel range X-axis: 1,200 mm Travel range Y-axis: 900 mm Travel range Z-axis: 500 mm Spindle speed: 16,000 rpm Tool holder: SK 40 Milling spindle diameter at the front bearing: 70 mm Table clamping surface: 1,400 x 900 mm MACHINE DETAILS Control system: HEIDENHAIN iTNC 530 EQUIPMENT Tool changer Nwedpfxezdttpo Abkjh

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller manufacturer: HEIDENHAIN, controller model: I TNC 530, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,000 h, spindle nose: BT 40, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis continuous mobile gantry vertical machining center, with rotary table (capable of both horizontal and vertical mounting) with a diameter of 550mm. Possibility of pendulum machining (pallet changer type) with dedicated partition. Equipped with BLUM laser control NT tool presetting. Wireless part probe HEIDENHAIN TS 642. Belt-type chip conveyor. High-pressure through-spindle cooling with paper filter. Spindle chiller. Remote HEIDENHAIN handwheel. Nwodpfx Asy Diabobkoh

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, overall weight: 12,500 kg, controller model: iTNC 530, rotational speed (max.): 18,000 rpm, General Data Measurements width 3970 mm Measurements depth 4629 mm Dqmcjh Measurements height 3050 mm Machine weight 12700 kg Main Drive Number of spindles 1 Nwedpsvambiefx Abkeh Spindle speed range 16000 rpm Spindle motor power 10 kW Tool taper SK 40 Number of axis 3 Movement X-Axis Movement 1200 mm Y-Axis Movement 900 mm Z-Axis Movement 500 mm Table Outer length 1400 mm Outer width 900 mm This 3-axis HERMLE C 1200 V vertical machining centre was manufactured in 2003. It features a robust clamping table measuring 1400 x 900 mm and a high-performance milling spindle with a maximum power of 10 kW, torque up to 87 Nm, and speeds up to 16,000 RPM. Ideal for complex machining tasks, the HERMLE C 1200 V machine we have for sale offers precision and durability. Tool magazine can be dismantled so the width can be reduced to 2450 mm. Contact us for more information. Application Types Milling

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 12644, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN TNC 426, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a business liquidation. Bids are binding and require timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Travel distances Travel distance X-axis: 1,200 mm Travel distance Y-axis: 900 mm Travel distance Z-axis: 500 mm Spindle Nsdpfxsxqfzrj Abkswh Minimum distance from working spindle to top edge of table: 180 mm Maximum distance from working spindle to top edge of table: 680 mm Milling spindle diameter at front bearing: 70 mm Spindle speed: 15,000 rpm Tool holder: HSK A63 Feed Feed rate X-axis: 1 – 3,000 mm/min Feed rate Y-axis: 1 – 3,000 mm/min Feed rate Z-axis: 1 – 3,000 mm/min Work table Table dimensions: 1,400 x 900 mm Number of T-slots: 14 MACHINE DETAILS Control: HEIDENHAIN TNC 426 Electrical data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Rated current: 31 A Connected load: 45 kVA Dimensions & weight Dimensions (L x W x H): 6,000 x 3,200 x 2,900 mm Weight: 12,000 kg EQUIPMENT 30-position tool changer Measuring probe Tool holders in the tool changer Note: Transport can be carried out on a truck up to 3,000 mm width.

Condition: good (used), Year of construction: 2008, Universal Machining Center Machine type: DMG HSC 75 linear Control: Heidenhain i-TNC530 Year of manufacture: 2008 New spindle: 2025 Power-on hours: 63,133 h Spindle operating hours: 28,596 h Nsdeyq H Arspfx Abkowh TECHNICAL DATA: Travel distances: X-axis: 750 mm Y-axis: 600 mm Z-axis: 560 mm Feed rate (X/Y/Z): 90 m/min Rapid traverse (X/Y/Z): 90 / 90 / 90 m/min A-axis: -10° B-axis: +110° C-axis: 360° Spindle speed range: 28,000 rpm Tool changer Tool holder: HSK-A63 Tool stations: 60 Tool diameter: 80 / 140 mm Tool length: 300 mm NC rotary table: Ø 750 mm Max. table load: 800 kg Table size: fixed table: 950 x 650 mm Max. table load: 1,000 kg Equipment features: Chip conveyor Internal coolant supply (IKZ): [bar] Oil mist extraction Tool breakage control: Blum Laser Measuring probe Mode of operation: 4 Electronic handwheel

Condition: used, Year of construction: 2005, operating hours: 18,950 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 18950 Std Verfahrwege X 350 mm Y 220 mm Z 220 mm U 350 mm V 220 mm Njdpfxowzyvhs Abkjwh Year 2005

Year of construction: 1971, condition: used, Technical details: max. wheel diameter: 300 mm max. module: 5 module min. : 0,5 max. workpiece weight: 60 kg Nwedjvc Apbopfx Abkjh weight of the machine ca.: 4,0 t dimensions of machine: 1800x1850x2500 mm dimensions electric cabinet: Nr. 1: 1930x400x1920 mm dimensions electric cabinet: Nr. 2: 800x230x1950 mm dimensions:: Abluftanlage: 1400x700x560 mm dimension cooling device LxWxH: 1,2 x 1,0 x 0,45 m Electronically controlled tooth flank grinding machine up to module 5 and a Ø of 240 - 300 mm feed speed per workpiece revolution infinitely variable 0.4 - 3.2 mm max./min. Number of teeth: 130 / 12 max./min. Pressure angle: 30° / 14°30` max./min. Spiral pitch with 24 teeth: 6000 / 200 mm max. tooth helix angle, both sides: 45° Speed of the grinding worm: 1900 rpm without dressing device Equipment: approx. 77x change transmission wheels, pipe extensions and various tools Two of these machines are for sale. Both machines are supplied via two common control cabinets and an exhaust air system. *

Condition: excellent (used), Year of construction: 2008, x-travel 630 mm y-travel 560 mm z-travel 560 mm Control MillPlus HEIDENHAIN table dimension - longitudinal 1000 mm table dimension - cross 600 mm spindle turning speed range 12000 U/min Number of axles 4 St. Nsdpfx Aevwgp Uebkjwh rapid traverse 30 m/min tool change unit 24 -fach weight of the machine ca. 9 t The DMU 60 monoBlock is in very good condition and immediately available. Accessories: - Measuring probe

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Used Machine - Mitutoyo Crysta Apex C7106 Here I offer a very well-maintained 3-D coordinate measuring machine from the manufacturer Mitutoyo. The machine is built in 2004. The machine was used exclusively in an air-conditioned measuring room. It is a TOP equipped machine with which you can start immediately! Of course, we can also offer transport, setup and commissioning as well as calibration (factory or DAkkS) so that you do not have to worry about the individual items! Specifications see attached PDF. Leasing possible. Nwsdovpdhxspfx Abkoh (All prices are NET)

Condition: as good as new (ex-display), Year of construction: 2021, Brand new, unused machine!!! DOOSAN LYNX 2100G Year: 2021/10 Nwodpfx Abey E Ixxekjh Max. turning diameter: 170 mm Max. turning length: 330 mm Standard chuck size: 6" Max. spindle torque: 118 N·m Max. spindle speed: 6000 rpm Max. spindle power: 18.5 kW Parts catcher Control system – FANUC touch Cromar chip conveyor Machine documentation