Hapro planing head for strip planing knives

Hapro

Condition: used, Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear Kedef S T Iwspfx Anwjdn -Number: max. 3x drill -Admission: M8 -right/left: rotating alternately -Distance drill: 25 mm, offset (see photo) -Number: 3 drill heads available -Price: per piece -Dimensions: 90/85/H70 mm -Weight: 1.6 kg/piece

Condition: good (used), Year of construction: 1992, machine/vehicle number: 19703, Offer 22584 Kedpop H Tu Esfx Anwjdn Technical data: - Welding current 320 A 60% ED - 270 A 100% ED - Welding current adjustable in 42 steps 40 A - 320 A - Digital volt + ampere display - Separate wire feed case with hose package approx. 1 lfm - intermediate package machine - wire feed case approx. 1,5 m - 4 roller wire feed steplessly adjustable - 2 stroke - 4 stroke - regulation - Spot welding - welding length / welding time adjustment - wire back firing adjustment - ground cable - pressure reducer - connection 400 V / 32 A / 18 kVA - Space requirement approx. W 550 x H 1200 x D 1100 mm - Weight approx. 300 kg

Condition: good (used), Multi-spindle head, multi-spindle drill head, dowel drill head, hardware drill head -Dimensions: 190/85/75 mm -Drilling distance: 26 mm -Medium drill bit: offset by 5 mm -Number: 1x drill heads available Price: per piece Kdodpeb A I Ulefx Anwon -Weight: 2 kg/piece

Condition: new, Year of construction: 2024, functionality: fully functional, HIGH-PRESSURE PUMP HT SERVO-JET4000 Kodeu Hz Tqepfx Anwodn A well thought-out principle with great effect. HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. + Up to 40 % energy savings compared to conventional systems, Investment eligible for subsidies + High energy efficiency: servo direct drive, no reactive current, low and and flexible power consumption + Low connected load required: no power consumption when the WSS system is at a standstill of the WSS system, suitable for companies with low energy supply + 3-piston plunger pump: high liter capacity and high efficiency of up to 98 %, replaces 6000 bar technology, long maintenance intervals, simple design, no hydraulic system, no warm-up and start-up phase - ready to start immediately + Permanent pressure control and integrated pulsation damping: Continuous readjustment of the cutting pressure to the set value - no pressure fluctuations, higher cutting speed than with a pressure intensifier in a comparable combination + Lowest noise level of 75 dB: high-quality complete unit with soundproof housing + Can be used universally for all waterjet machines and brands

Condition: used, Impulse shielding gas welding machine REHM type RMP 400 Hybrid (REHM-Mega-Puls) Pulse welding unit with inverter welding power source Serial no. Year of manufacture 1998 Power output 400 Amps = 60% duty cycle 320 Amps = 100% duty cycle Kedpfx Anowa Uwdewsdn Continuously adjustable range Mains connection 400 Volt, 50 Hz, 32 Amp plug - separate 4-roller wire feed unit with connecting hose package meters - digital display for voltage and current - pulse welding function with single and double pulses - 2-stroke and 4-stroke welding function - 4 meter Binzel hose package with central connection - water-cooled - shielding gas pressure regulator - MIG/MAG pulse arc welding - MSG double pulse welding - MIG/MAG welding Space requirement L x W x H 1150 x 510 x 1350 mm Weight 200 kg good condition

Condition: used, This listing is for a Schott Halogen HT2 Stirrer Hotplate The unit is in full working condition and is ready for immediate release. Key Features & Specifications While exact values for the “HT2” designation are not widely published, the listed SLR Halogen model gives a very good indication of typical performance: Heating surface: glass/ceramic top plate (≈16 cm diameter in one listing). Maximum plate surface temperature: up to ~500 °C. Stirring range: approximately 10 – 1,100 rpm (in one listing). Ksdpfoxv Aa Nsx Anwjdn Compact dimensions: one listing shows ~24 × 37 × 9 cm (W×D×H). k Suitable for use with a retort rod.

Condition: used, Grinding machine, angle grinder, lathe grinder, thread drill grinder, milling cutter grinder, surface grinder, drill grinder, bench grinder, tool grinder Kedpfx Aolmrkzonwsdn -Manufacturer: Bösch, tool grinding machine type L 15 -Grinding discs: Ø max. 150 x 32mm / framed Ø 125 mm see photos -Motor power: 0.55 kW -Speed: 2800 rpm -Coolant device: -Dimensions: 1110/480/H1310 mm -Weight: approx. 182 kg

Condition: excellent (used), Thyristor controller with field regulator (28211) Kdsdpfjhhyy Rex Anwon Make Unitek type 82 Classic Q. 3 400/450-60 UE 400 UA 450 ld 60 A Ia 120 A Weight 11 kg Width 290 mm Depth 230 mm Height 225 mm

Condition: new, Year of construction: 2021, Exhibition unit Year of manufacture: 2021 Dimensions and Weights Length (product): approx. 1700 mm Width/Depth (product): approx. 600 mm Height (product): approx. 2400 mm Weight (net): approx. 69 kg Chip collection volume: 2 x 215 l Nominal outside diameter extraction nozzle (inlet): 260 mm Kdjdpfow I Uuwjx Anwon Nominal outside diameter extraction nozzle (outlet): 2 x 100, 2 x 120 mm Electrical Data No-load speed: 2950 rpm Connection voltage: 400 V Mains frequency: 50 Hz Power consumption: 3.8 kW Output power: 3 kW Filter Filter area: 2 x 2.4 m² Noise Emission Max. sound pressure level: 89.9 dB(A) Airflow Nominal volumetric flow: 4300 m³/h Max. negative pressure: 2000 Pa SCOPE OF DELIVERY Fine filter bag, two chip collection bags Availability: short-term Storage location: Hochheim