Injection moulding machines - multi-colour

Haitian Haitian ZE 1200III-300-V80 + Hilectro XTD-1100ID, 2021

Condition: used, Year of construction: 2020, clamping force: 400 kN, displacement volume: 475 cm³, injection pressure: 1,650 bar, overall weight: 24,500 kg, load hours: 1,600 h, screw conveyor diameter: 55 mm, terms of delivery: EXW (ex Works) Hedpfx Aev S H Rboh Hofp delivery time: on request terms of payment: 100% prior to delivery

Condition: new, Year of construction: 2023, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller manufacturer: Heidenhain, controller model: TNC640, Control : Heindenhain TNC 640 Technology : Direct drive Speed : 12,000 rpm Power : 30 kW Torque : 176 Nm Taper : SK 40 Toolchanger : 40 stations Working area Movement X : 1,000 mm Movement Y : 600 mm Movement Z : 650 mm Fixed Table (X/Y) : 1,100 x 600 mm Load capacity : 1,200 kg Others Hedstpm Stopfx Ah Hefp Rapid traverse (X/Y/Z) : 36/36/32 m/min

Year of construction: 1996, operating hours: 24,222 h, condition: good (used), This Dr. Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 1996 and has relatively few working hours for its age. - Brand: Dr Boy - Model: 80M - Year of construction: 1996 - Screw diameter: 42mm Hjdpfx Aopwh Aksh Hjfp - Shot volume: 200 cm³ - Clamping force: 80T - Working hours: 24,222

Condition: used, mileage: 281,535 km, power: 62 kW (84.30 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 2,681 mm, overall weight: 2,162 kg, empty load weight: 1,421 kg, maximum load weight: 714 kg, first registration: 12/2014, loading space length: 1,700 mm, loading space width: 1,400 mm, loading space height: 1,200 mm, emission class: euro5, color: yellow, driver cabin: other, suspension: other, number of seats: 2, Year of construction: 2014, total length: 4,406 mm, construction height: 1,820 mm, fuel: diesel, Equipment: ABS, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, Engine failure. The Volkswagen Caddy 2.0 TDI EURO-5 is characterized by its practical features, including two side sliding doors and wing doors at the rear. With a 2.0-liter diesel engine that produces 62 kW (84 hp) and a manual transmission, the Caddy offers solid performance for everyday transport tasks. The vehicle has a Euro 5 emissions standard and a green environmental sticker, which enables cheaper entry into environmental zones. The model is in striking broom yellow and offers space for two people. The interior allows for versatile use thanks to the side loading option of up to 2.65 m. Even with a high mileage of 281,535 km, the vehicle impresses with its reliable performance. The Caddy was first registered in December 2014 and has had one previous owner. Registered as a truck, the vehicle is particularly suitable for Hjdpfx Astw D Avjh Hjfp businesses or export. The vehicle can be viewed without prior registration from Monday to Saturday. A registration and delivery service is offered for an additional charge within Germany. The selling price depends on various criteria, such as mileage and technical condition. Only sold to businesses (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: TET351P5-offAD-Bypass - 2200373733, cooling capacity: 66 kW (89.73 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,082 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 11.2 m³/h, pump pressure: 4.68 bar, total width: 866 mm, total length: 2,250 mm, total height: 2,054 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / air-cooled water chiller, Type: TAEevo Tech 351 P5-offAD-Bypass MTA S.p.A. Chiller, water chiller; cooler TAEevo Tech 351 P5-offAD-Bypass are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Includes crankcase heater, electronic expansion valves, phase monitoring, 350-liter buffer tank, and integrated P5 high-pressure pump. Special features: Hjdpjwlt Raofx Ah Hsfp - Open fill system / attached tank - Bypass with manual valve between water inlet and outlet Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 66 kW Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 11.2 Available pump pressure (bar): 4.68 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power consumption (kW): 39 Max. current (A): 68 Start-up current circuit (A): 213 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 1082 Connection: Rp 2" Serial no.: 2200373733 Year of manufacture: 2021 Condition: Visual 2, Technical OK used (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 88131 Lindau Used machines may have visual imperfections due to their usage. (Subject to technical changes and prior sale!)

Condition: excellent (used), Boy 80M Year 1998 Closing 80 tons Hsdpfx Ahsmt Hh Eo Hefp Scrow 36 mm Spray weighted 132 g spar distance 41x 35,8

Condition: used, Year of construction: 2008, clamping force: 160 kN, displacement volume: 251 cm³, injection pressure: 2,500 bar, overall weight: 8,200 kg, load hours: 37,200 h, screw conveyor diameter: 40 mm, terms of delivery: FCA Pegnitz delivery time: on request Hsdpfx Ahowd Udle Hsfp terms of payment: 100% prior to delivery

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 8,823 h, 1. Basic information about the machine • Model: EOS M400 • Manufacturer: EOS GmbH • Year of manufacture: 2015 • Laser operating hours: 8823h • Total exposure time: 612h • Condition: little used, training machine, last maintenance July 2024 2. Technical specifications Hedpfev Hqhgex Ah Hjfp • Installation space size: e.g. B. 400 x 400 x 400 mm • Laser: type & power (1,000 W fiber laser) • Material compatibility: aluminum - license available • Layer thickness: 90 µm 3. Accessories & equipment • Powder handling system: sieve module, suction station, lifting trolley • Filters & maintenance units: available • Additional construction platforms: 4 pieces • Cooling or additional equipment: air/water cooler, as good as new (01/201) • Material: 100kg AlSi10Mg included 4. Location & transport • Location: Villach, Austria • Availability: Immediately • Transport: Transport & dismantling are the responsibility of the buyer • Inspection: possible on site

Condition: good (used), Year of construction: 2006, Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Handling capacity: 10 kg Hsdorgw Exjpfx Ah Hefp Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Condition: defective spare-parts repository (used), Year of construction: 2007, functionality: not functional, For sale is an injection molding machine of the brand Netstal and the type Synergy 1000-230 After a transportation accident, the control cabinet is completely defective. For this reason, the machine is offered as a spare parts carrier or for repair. Hfsdpfx Aherfbnmj Hjp Machine would be fully operational and in good condition Technical data: Operating pressure: 210bar, Injection force: 182kN, clamping force: 1000kN, Opening stroke: 0-400mm, mold installation height: 450-750mm Total weight: 7200 kg Operating hours: approx. 53,000 Available from March 2024 First fillings with hydraulic oil can be ordered from us On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website