Combined Timber Frame Assembly Station

H&M X-Combi

Condition: new, Year of construction: 2024, functionality: unexamined, power: 265 kW (360.30 HP), Compact, highly efficient combined heat and power unit with a state-of-the-art SCANIA 6-cylinder, lean-burn gas turbo, 4-stroke gas Otto engine. Unit, gas pressure control system, mixture and engine water cooling circuit mounted on base frame for power and heat generation with a high-quality synchronous generator (3P, 400V, 50Hz) for mains parallel operation and optimized heat extraction via plate heat exchanger for heating water/process heat with a temperature level of VL 90°C / RL 75°C, with catalytic converter (optional SCR system) for low-emission operation in accordance with the MCP Directive (EU) and 44th BImSchV (DE). TECHNICAL DATA GENSET /BHKW - NATURAL GAS/BIOMETHANE Electrical output at cos φ=1: 265 kWel Electrical efficiency: 41.9 % Thermal efficiency: 44.1 % Total efficiency: 86.0 % Thermal output motor: 150 kWth Thermal output at 120°C exhaust gas temperature: 129 kWth Total thermal output: 279 kWth Electricity coefficient el/th. : 0,95 LEAN TURBO NATURAL GAS / BIOMETHANE ENGINE Engine type 6R Displacement: 12,7Ltr Combustion heat output - 100% load: 632kWel Gas consumption: 63,2Nm³/h Length x width x height m 4.1 x 1.5 x 2.1 The CHP has a control cabinet with a display for the visualization of all relevant operating parameters including a DSL modem for remote maintenance and external monitoring, as well as an interface for control energy for connection to the Energiepilot E2M. The scope of delivery includes a mains starter to provide the optimum starting speed, as well as a gas detector, smoke detector, emergency stop switch and alarm flashing light/horn. All pipes are made of V2A and insulated where necessary. The CHP unit complies with the medium-voltage directive VDE-AR-N 4110:2018-11. An automatic gas shut-off valve for installation outside the CHP installation room and all operating fluids are not included in the scope of delivery. The CHP unit is also optionally available in a container. Gbsdpfx Aot E N I Sefijw

Condition: new, Year of construction: 2025, operating hours: 2 h, feed rate X-axis: 200 m/min, working width: 400 mm, total length: 2,150 mm, working height: 950 mm, input voltage: 400 V, overall weight: 1,850 kg, compressed air connection: 8 bar, Since 1970 Ceetec A/S produces innovative wood painting machines in Norre Aaby, Denmark. According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative technology where it makes sense for our customer. This makes our machines very long living but also very cost effective for the customer. Gbjdpfx Afeffc Unsijw Our CNC linear spraying machine is equipped with 3-4 traverses which are controlled by the easy to use touchscreen. We can offer it with 1-2 paint circles for easy color management. Further specification: - painting dimensions: 100 x 400mm (heigth x width) - speed: 10 - 200m/min - capacitiy: up to nearly 12.000 running meter per hour - power connection: 400VAC (other system on request) - air connection: 8bar air pressure - made for painting 5 sides, 6 sides painting optinal possible It can be combined with our innovative drying systems or used as a stand alone machine. You are interested and want to see a line working? No problem, we will organize a visit at another customer for You. Do You have further questions? Please feel free to contact us whenever You want!

Condition: new, A heavy duty German built radial arm crosscut saw with swivel and tilting capability and a large cutting capacity of up to 200mm deep. A unique feature on this model of machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Both optional vertical (tilting) and standard horizontal (swivel) angles can be adjusted manually with either graduated scales or with an optional digital display unit for reading the position. The saw is also available with an optional automatic NC positioning system with 4 memorised pre set positions. The machine is ideally suited for easy and accurate cutting of compound angles for furniture and joinery components. The machine can be specified to cut wood, aluminium, plastics or composite materials. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand Heavy duty 5 KW motor. Spring return of saw carriage. 1 x 520mm dia TCT x 4.4mm kerf x 50mm bore - 60 teeth WZ saw alternate bevel. 50mm spindle diameter. Gbodpfx Afody Hm Njiow 22 - 90 - 45 horizontal movement. (Swivel) 30 - 90 - 60 vertical movement. (Tilt - optional N model) Adjustable upper protection. 520mm TCT sawblade Z60. Cutting Capacity: 420 wide x 200mm deep at 90 degrees. 295 wide x 200mm deep at 45 degrees. 420 wide x 140mm deep at 45 degrees. (Tilt- optional N model). Dust extraction outlet 100mm. Working height of table 900mm

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. You can use our machine for working with round pipes as with rectangular pipes. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. Gbedsf Epznepfx Afiow It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own)

Condition: new, Year of construction: 2025, operating hours: 1 h, table length: 9,000 mm, load capacity: 3,500 kg, Butterfly/rotary table with a length of 9m - a set consisting of two wings. BOOSTON - we are a manufacturer of machines and equipment for the prefabrication of wooden technology houses. Gbodpfx Aop Ecn Ujfisw Buy a machine directly from the manufacturer! Quality guarantee, short delivery time. We offer an assembly table - lifted (butterfly table) consisting of two wings with a length of 9.0m (models available from 6m to 12m). - Table drive - hydraulic cylinders, hydraulic pump - First wing with a total width of 360cm - Second wing with a width of 230cm (with the possibility of extension) - permissible load - 3500kg for one wing - solid powder-coated steel construction

Condition: ready for operation (used), load capacity: 32,000 kg, empty load weight: 38,000 kg, lifting height: 12,200 mm, Demag DH-takel met digitale weegschaal breedte: 6008 mm hoogte van de hoofdligger: 1500 mm hoogte van de takel bovenop de balk: 1210 mm Kind of: overhead travelling crane Span: 25 meter Tackle speed: 6,3 / 12,6 m/min Rotationspeed: 10 / 34 m/min Displacementspeed: 10 / 100 m/min Gjdpfx Aov Sfrwefiobw Numbre of riggers: double girder

Condition: excellent (used), Fully automatic line for poles/stakes production, Infeed conveyor, step feeder, chain conveyor , 2 head rounding machine, separation unit, cross cut sizing saw, pointing/chamfering unit, also possible to make chamfer/chamfer or 2 poles same time pointing chamfer and chamfer/chamfer. max diameter 120 mm Gbedpfx Afjtyv S Ijisw

Condition: ready for operation (used), Year of construction: 2007, For sale Randek line Godpfxswczlyo Afiebw Machines are used manufactured in 2007

Condition: excellent (used), Gitterbox, load carrier Collapsible Color: green Floor: flat steel plate External dimensions: 1600x1200x1000 mm Gedpfx Aolcct Sefiobw Weight: 150kg

Year of construction: 2018, condition: as good as new (ex-display), Miter saw with a saw blade diameter of 600mm (optional 800mm) - manual miter adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (height and inclination angle of the clamping cylinders infinitely adjustable) - Two-handed safety control Optionally available: - Automatic miter adjustment - Roller conveyor with length stop or positioning system - Design as a sawing machine - Preload magazine - Horizontal clamping device - Suction system Gjdpfx Aed Rhzwofiebw - Other accessories on request We will be happy to make you an offer tailored to your requirements. The machine can be inspected and tested in 56812.