Paper sorting plant

Grumbach und Petermann GmbH Paper Spike 2000

Condition: used, Year of construction: 2017, operating hours: 854 h, total width: 2,450 mm, total height: 1,100 mm, total length: 1,900 mm, Empty weight: 800 kg Price: On request - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 5037411-000150 - Operating hours: 854 - Transport dimensions: 1900mm x 2450mm x 1100mm (l x w x h) Njdpfxoxan Uto Aaajla - Transport weight [kg]: 800kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Nljdpsvf E Avsfx Aaasa Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: good (used), functionality: fully functional, fuel type: diesel, color: yellow, Year of construction: 1999, machine/vehicle number: 1012, Product Description Used mobile crusher Manufactured by KOMATSU Model BR500JG-1 SERIAL : 1012 YEAR : 1999 Max Crushing Capacity : 120-460ton/hrs Max feed size of Trash : 1200x850x600 mm Nedpfx Aeumtg Ujaaola Please contact IVAN HOW JPN Industrial Trading Pte Ltd 13A Pandan crescent, Singapore 128478

Condition: like new (used), The MSP 120 ZK is ideally suited for crushing and subsequent briquetting of various types of metal chips. The MSP 120 ZK briquetting press with integrated shredder is composed of a hydraulic chip press paired with an upstream shredder, both perfectly matched to each other. This system enables the crushing and compaction of chips generated during turning and milling operations. The volume is significantly reduced, and the briquettes are separated from the coolant lubricants (emulsion, oil) absorbed during earlier machining processes. The system consists of a feed hopper for loading the material to be processed and a shredder inside the hopper, which reduces chip length. A conveyor system moves the shredded chips continuously and stepwise via a conveyor belt into the chip press hopper. There, two augers feed the material into the compaction chamber. The system is equipped with a monitored liquid collection tank and pump, allowing coolants to be returned to the production process. Cycle control is managed by a PLC and an electronic level sensor for the monitoring of the hopper fill level. Optionally, a tipping device can be added for manual loading of the unit. Briquetting Press: Throughput (Aluminum): 15–20 kg/h Throughput (Steel, Copper): 45–60 kg/h Briquette diameter: 60 mm Productivity: 120–180 pcs/h Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Voltage: 400V / 50 Hz Oil tank: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Shredder: Number of knife shafts: 1 pc Motor power: 5.5 kW Number of knives: 16 pcs Exchangeable knives: Yes Knife size: 25 mm Knife material: Hardened steel Shaft length: 400 mm Screen mesh size: 20 mm Hopper inner diameter: 1,000 mm Hopper volume: 1 m³ Njdpfx Aasw R Ransaola Weight: 280 kg Power supply: 380V Overall system dimensions: 2,820 x 1,862 x 2,065 mm Colour: Textured paint, RAL 7035 light grey

Condition: used, mileage: 309,800 km, power: 315 kW (428.28 HP), first registration: 05/2001, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2025, color: white, gearing type: semi-automatic, emission class: euro3, total width: 2,550 mm, total height: 3,950 mm, Year of construction: 2001, Equipment: ABS, air conditioning, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Mercedes Actros 2543 6x2 Wiedemann Super 2000 10.0/6.5 Water Recovery Vehicle #509 Body Wiedemann enviro tec Super 2000 10.0/6.5 water recycling system 10,000 liter tank capacity (sludge) 6,500 liter clean water tank (flush water compartments) Discharge by tilting the tank 45° Vacuum System Nlsdpfswtwwmjx Aaaoa Wiedemann & Reichhardt KW 3000 Approx. 3,000 cbm/h, approx. 20 m suction hose DN 150 Suction pipe DN125 with channel nozzle High Pressure System URACA P3-45 G 70 approx. 475 l/min at 150 bar Approx. 200 m high-pressure hose DN32 Hydraulic high-pressure hose reel with approx. 60 m DN13 Special Features Suction and HP boom 5 liter hand-washing station Stainless steel toolbox Analog control cabinet Radio remote control Tool compartment - left Hose storage Pump compartment sound insulation (extended) Work lights Central lubrication system Waste bin Various brackets Cold water hand-washing device Cable winch Rotating beacon front and rear Technical Data Unladen weight 17,850 kg Gross vehicle weight 26,000 kg Length 10,700 mm Height 3,950 mm Width 2,550 mm For further detailed information and/or pictures, please contact us directly. A large selection of further vehicles for SALE or RENT is available at: Specifications, prior sale and errors excepted. The buyer is obliged to independently verify the condition and equipment of the item. Sale exclusively according to our terms and conditions and without any warranty.

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: W230-028, pressing force: 80 t, warranty duration: 24 months, pressure: 250 bar, power: 45 kW (61.18 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. This is a baler HBC80 (45kW) with crosswires. Nljdpfx Aastvat Teaoa At the time of writing this baler is being completely refurbished in our refurbishment workshop. This refurbishment takes place on the basis of the very strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold with a 2-year warranty.

Condition: new, We would like to offer shafts specifically designed for medium-sized shredders equipped with side combs, a breaking bar, and a cassette system. Suitable for models: LINDNER U75, ARJES VZ750, HAMMEL VB750OL, NOVA 75DK - 5-7-7 - 6-7-7 - 8-7-7 - 10-7-7 MRW 2.85: - 5-8-8 - 6-8-8 - 8-8-8 - 10-8-8 PROTECHNIKA is a company with a 21-year history, specializing from its inception in the manufacturing of spare parts and complete recycling systems. In recent years, we have expanded our product range to include grinding shafts for slow-speed shredders. Through the implementation of automated welding processes and proprietary production technologies, we have successfully reduced production lead times while maintaining consistently high quality standards. Grinding shafts are a serial product, which also allows us to collaborate with machine manufacturers on an OEM basis. What sets PROTECHNIKA apart from the competition? The answer is simple: - Certified 3.1 materials - TUV SUD Rheinland quality assurance - ISO 9001 certification - Automated welding processes / ISO 15613 / ISO 15614 - Welders certified to ISO 9606-1 Nlodpfox Hhwdjx Aaaea - ISO 9001:2015 - ISO 14001 - Independent design department able to fulfil any customer-specific requirements - In-house Research and Development Centre Building long-term customer relationships is our top priority, as your satisfaction is our success!

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,922 h, Doppstadt Inventhor Type 9 Engine Type: Diesel engine Make: MTU 6R 1300 Emission Standard: Stage V / EUROMOT III A Rated Power: 390 kW / 530 HP Fuel Capacity: 1,000 l Discharge Conveyor Width: 1,200 mm Length: 8,500 mm Belt Speed: 2.0 m/s Nledpfjxcx Snsx Aaasa Discharge Height: 5,050 mm Feed Hopper Loading Height: 3,307 mm Drum Number of Drums: 1 Drum Length: 3,000 mm Drum Diameter: 600 mm Drum Speed: -5 – 32 rpm Number of Tools (inserts): approx. 42 MACHINE DETAILS Total Weight: 33,000 kg Length: 16,786 mm Width: 2,500 mm Height: 5,050 mm Transport Width: 2,500 mm Transport Height: 3,893 mm Transport Length: 9,973 mm Operating Hours: 4,724 h EQUIPMENT - Additional equipment: Overband magnet - New stepless drive concept with VarioDirect Drive - No engine load caused by start-up torque thanks to load-free drum positioning - Self-cleaning function for the wrapping unit - Flexible shredding concept with various application packages - New door and housing design for improved maintenance access - Quick fold-out conveyor system at the push of a button - State-of-the-art monitoring concept - Reduced noise emissions Machine has been overhauled and is immediately available!!!!!

Condition: used, mileage: 235,530 km, power: 324 kW (440.52 HP), first registration: 04/2011, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2026, color: green, gearing type: mechanical, emission class: euro5, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2011, Equipment: ABS, air conditioning, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ MAN TGS 28.440 6x2-2 BL Wiedemann SUPER 1000 – available by arrangement Nledpfx Aaewu Syxjasa Internal Ref. #515 Chassis * MAN * TGS 26.440 * 6x2-2 BL * 440 HP / 324 kW * EURO 5 * MAN transmission * N-drive NMV 221 * 4,200 + 1,350 mm wheelbase * Front suspension: parabolic springs, 9.5 t * Rear suspension: air for high center of gravity * 400-liter fuel tank + 60-liter AdBlue * 385/55 R 22.5 steering axle, TL 160&K * 315/70 R 22.5 drive axle, TL 154/150&K * 385/55 R 22.5 steering axle, TL 160&K * Chassis color: RAL 9011 graphite black * Halogen beacon lights * 'M' cab, 2,240 mm wide, 1,880 mm long * Air conditioning * Reversing camera Body * Wiedemann enviro tec * Super 1000 8.0/4.0 water recycling system * 12,000-liter tank capacity * 4,000-liter water compartment * 8,000-liter dirty water compartment * Emptied by hydraulic tilting, 45° Vacuum System * Wiedemann & Reichhardt KW 3000 * 3,000 m³/h, 80 kW * Piping: DN 150 * approx. 25m suction hose DN 125 * Suction pipe DN 125 High-Pressure System * Uraca P 3-45, 407 liters at 175 bar * High-pressure reel for approx. 180m DN 32 with automatic rewind * Hydraulic jetting hose reel with approx. 60m DN 13 Special Features * Sludge tank made of stainless steel 1.4301 * Suction and HP booms * Warm water hand-washing unit * Stainless steel toolbox * Control cabinet with display * NMV start can be activated from control cabinet * Remote control * Equipment cabinet with hatches * Hose tray * Pump compartment with soundproofing extended upward * LED work lights Technical Data * Unladen weight: 18,080 kg * GVW: 28,000 kg * Length: 10,900 mm * Height: 3,650 mm * Width: 2,550 mm For further details and/or images, please contact us directly. A wide range of other vehicles for SALE or RENT can be found at: Subject to change, prior sale, and error. The buyer is obliged to independently verify the condition and features of the goods. Sale exclusively according to our terms and conditions and without any warranty.

Condition: used, Year of construction: 2022, operating hours: 1,150 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m Nlodpfx Aaexx N Dgjaja - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement