Milling machine

Gorton

Condition: used, Year of construction: 1995, turning diameter over bed slide: 500 mm, Universal lathe Make: ZMM Type 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing over bed ø: 500 mm Ksdpowudhusfx Adtewt Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live center • Coolant pump • Machine lamp All information subject to change. A live demonstration under power is possible at any time in our showroom.

Condition: new, Year of construction: 2025, Machine features This planer and thicknesser is a well-designed machine, providing large adjustment and mechanical machining possibilities of hard and soft wood. Adjustment itself is relatively simple and transforming the planer into a thicknesser takes only a couple of seconds. Relatively high weight (148 kg) ensures stability, and work safety, reducing vibrations with additional anti-vibration feet. Advantages of the planer Both tables of the planer are made of high-quality cast iron, with ground and Ra 1.6 polished surface Shaft guard can be freely set, adjusting its height, angle as well as extension Angular guide can be smoothly adjusted in the 90° – 45° range Planer tables involve additional sound dampeners decreasing noise Advantages of the thicknesser Thicknesser table is made of high-quality cast iron, with ground and polished surface Height is adjusted through a large and convenient handwheel, which, after adjustment, can be locked with an additional eccentric Its table is supported in 3 places Thicknessing can be lowered down to 190 mm Machine equipped with rollers (driving and receiving) which are located very close to the shaft, allowing for machining even short elements Roller feed drive is based on a belt, ensuring slip-free work (no "tooth marks" on the workpiece) Technical data Knife shaft diameter 75 mm Knife shaft speed 4800 rpm Extracting connector diameter 100 mm Swinging rule tilt angle 0–45° Ksdpfx Asvxh Nxsdtowt Number of knives 3 Maximum surface planer width 250 mm Maximum thickness planer width 248 mm Maximum surface planing height 180 mm Maximum thickness planer machining depth 3 mm Maximum surface planer machining depth 2.5 mm Thickness planer feed speed 6 m/min Dimensions (L×W) 1080×260 mm Weight 150 kg Motor power 2.0 kW Power supply 1 PHASE, 230V

Condition: new, Year of construction: 2025, container length: 20 ft, NEW CONTAINER / ONE WAY / Year of manufacture 2025/ 2026 +Lock box Kodpfx Aewut Nbjdtjwt +Forklift pockets Color: RAL 5010 , RAL 7016, RAL 7035, RAL 6007, RAL 9010, RAL 7042, RAL 7015

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale is a Felder F-700 Z milling machine with 4 spindle speeds. The machine is used as a showroom model at our facility and can be considered as new, with full warranty/guarantee. Technical specifications: - 4 milling speeds - Milling spindle tiltable 90° - 45° - Milling fence for tools up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table - Motor power 5.5 kW / 7.5 HP, SD start - Year of manufacture: 2023 / as new Kodpfx Aswp Ri Usdtjwt The machine is located at A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel.: 03137-3109 Related terms: milling cutter, milling machine, milling Reference: R-D1618

Condition: new, Year of construction: 2025, CORMAK ZX 40BPC is a solid metal drilling and milling machine. Possibility of head rotation +/- 90 degrees of spindle, possibility of head rotation +/- 90 degrees, automatic spindle feed, right and left rotation, large table, liquid cooling, automatic table feed in the x axis, powerful engine, ability to drill up to 40 mm. Rotational speed up to 2500 rpm Machine characteristics HEAVY STABLE CAST IRON AUTOMATIC SPINDLE FEED ADJUSTABLE HEAD HEIGHT MASSIVE CROSS TABLE WITH PRECISELY GRINDED SURFACE DOVtail-shaped guides QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATIONS ROTATING HEAD +/- 90° Technical data Max. drilling size (steel/cast iron) 32/40mm Face milling width 80mm End milling width 22mm Spindle extension 125mm Spindle taper MT4 Spindle speed (1400 rpm motor) 50～2500min-1 Maximum distance of the spindle tip from the table 735mm Maximum distance of the spindle tip from the base 1245mm Distance of the spindle from the column surface 272 mm Dimensions of the work table 730x210mm Base dimensions 690x520mm Engine 1.3/1.8kW Kwjdpfxjvxhfme Adtst Cooling engine 40W Dimensions 1200x1000x1910mm Weight 440 kg

Condition: new, NEBES TM 275 Band Saw Machine - 400 v Three-phase NEW "CE" INDUCTION motor Cast iron structure Adjustable cutting angle from 0° to 60° All cast iron structure Electric pump for blade lubrication and cooling Kwedpfx Adjh Nm Ncjtjt Oil-bath blade tensioning gauge Front controls and two cutting speeds Deviator for exclusion of coolant pump Blade guide with carbide skids (H.M.) Round cut 0° 220 mm Square cut 0° 200 x 200 mm Flat Cut 0° 230 x 185 mm Round cut 45° 150 mm Square cut 45° 150x150 mm Flat Cut 45° 150x200 mm Round Cut 60° 90 mm Square Cut 60° 90x90 mm Flat Cut 60° 90x120 mm HP 1.3 Voltage 400 V Blade size 2450 x 27 x 0.90 mm Weight 265 kg

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, Kwjdpfx Ajhpktvjdtst - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: used, Magnetic drill, hand drill -Magnetic base: Magnetor type PS 32 L Kedpfxsfc R D Ae Adtowt -Drilling machine: AEG type HBE-IV - Recording: MK2 -Max. Drill: Ø 23 mm -Connection: 265V/200Hz -Dimensions: 700/300/H670 mm -Weight: 49 kg

Condition: used, container length: 20 ft, empty load weight: 2,100 kg, -Used -Wind and waterproof -available immediately -The price is ex depot in Munich (also available in other regions on request) -We are happy to take care of delivery and crane unloading (costs on request) Our 20-foot storage container is the perfect solution for your storage needs. It offers you a safe, flexible and cost-effective way to store your goods and materials. Whether for use on construction sites, in industry or for private purposes - this container meets the highest standards of quality and functionality. Product features: - Dimensions: 20 feet (6.06 m) long, 2.44 m wide and 2.59 m high - Volume: Approx. 33 m³, ideal for storing large quantities of goods - Material: Robust steel construction that guarantees durability and resistance - Security: Equipped with a reliable locking system and reinforced doors to optimally protect your stored goods - Weatherproof: Weatherproof and corrosion-resistant coating that protects your goods from rain, sun and other environmental influences Kedpovyacgjfx Adtewt - Ventilation: Strategically placed ventilation openings prevent the accumulation of moisture and ensure an optimal storage climate Applications: The 20 foot storage container is ideal for storing tools, machines, materials, furniture and much more. It can be used both temporarily and permanently and is ideal for construction sites, warehouses, events or as additional storage space for your company. Additional benefits: - Easy handling: Thanks to the standardized dimensions, the container is easy to transport and place. - Flexibility: The container can be used in different locations and is mobile, so you can move it if necessary. Customization: On request, we offer individual modifications to meet specific requirements, such as shelving systems or additional ventilation. Rely on our new 20-foot storage container for safe and efficient storage of your goods!

Condition: good (used), 1 x Universal milling machine Macmon M 100 in very nice condition from vocational school. Kodpfxot Sdais Adtewt Technical data and more photos will follow. The machine can be inspected under power.