CNC lathe

Goratu GHT 4

Condition: excellent (used), Year of construction: 2000, turning length: 2,000 mm, spindle bore: 105 mm, spindle motor power: 21,000 W, total height: 2,100 mm, total length: 4,500 mm, total width: 2,000 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, turning diameter over bed slide: 620 mm, workpiece weight (max.): 2,500 kg, overall weight: 7,800 kg, Very little hours Hydraulic tailstock CE Safety doors Multi Fix Tool holders system  D1 Chip conveyor Swing over bed Ø: 620mm Swing over cross slide Ø:370mm DBC Turning Length: 2000mm Spindle bore: 105mm Spindle power: 21kW Tailstock spindle Ø: 100Ø Stroke pinole: 200mm Giedpfxoyuchrj Ai Neu Spindle taper: 6Mk Workpiece weight: 2500 Speeds / ranges: 1600Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Length: 4500mm Width: 2000mm Height: 2100mm Weight: 7800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Godpjxm Sxvefx Ai Neiu Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: good (used), CNC Lathe with y-axis Geminis Goratu - GHT-4 G4-800 Max. turning Ø:800mm Godpfxsygv Eue Ai Nsiu Length: 7000mm Width: 2500mm Height: 2500mm Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1998, condition: good (used), Make: UNION Type: Ti 1800 Year: 1998 Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis Gsdpfx Aekwcdboi Neiu 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Length 3400 mm Width 2000 mm Height 920 mm Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2001, Technical Features of this Bridge Type Milling Machine Manufacturer ZAYER Model KPU-5000 AR Year 11/2001 CNC HEIDENHAIN TNC-430 Table surface 6.500 x 1.800 mm Longitudinal travel (X Axis) 6.500 mm Cross travel (Y Axis) 3.050+873 mm Vertical travel (Z Axis) 1.250 mm Distance between columns 2.450 mm Maximum height between spindle nose and table with spherical head 1.565 mm. Maximum height between spindle nose and table with 45º head in vertical position 1.574 mm. Giodpjyxv Unjfx Ai Nju Rapid feed (X, Y, Z) 25.000 mm/min Max. working feed 15.000 mm/min Heads 45º Automatic head INCLUDED 45º Head (A Axis / B Axis) 360.000 posiciones Automatic Head 45º Taper ISO-50 – DIN 69871 Automatic Head 45º Speed 6.000 r.p.m. Spherical Rotation Head INCLUDED Direct Output Head Taper ISO-50 Main Motor Power 37 kW. Speed Ranges 2 Manual Head Change INCLUDED Retractable Automatic Support in the Right Side For 45º Head INCLUDED Retractable Automatic Support in the Right Side For Direct Output Head INCLUDED Ethernet Connection INCLUDED Double Chip Conveyor One at each side of the machine INCLUDED 1000 l Oil Tank with Filter Paper + Magnetic Separator INCLUDED Internal coolant 20 Bar INCLUDED External coolant10 bar INCLUDED Automatic tool changer INCLUDED ATC positions 60 CNC 3D ROT Function INCLUDED Others Positioning Accuracy 0.010 mm. Repetitive Accuracy 0.005 mm. Handwheel HEIDENHAIN HR-410 Carrying Load Table 20.000 Kg. Machine Weight 52.000 Kg.

Condition: used, Year of construction: 2005, - Fagor 8055 CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters - Year of construction 2005 Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min - Working spindle speed: 8000 rpm - Tool holder: BT40 - Table size: 762 x 363 mm - Maximum table load: 350 kg - Motor power: 18 kW Gijdpstvf Htefx Ai Neu - Operating voltage: 400 V - Weight: 3140 kg

Condition: excellent (used), Year of construction: 2016, operating hours: 10,800 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, workpiece weight (max.): 4,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 10,800 h, spindle nose: HSK 100, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMF 260/11 with CELOS and Siemens 840D SL Operate in well-maintained condition. Technical data can be found in the appendix. Equipment / Features: - Siemens 840DSL Operate with Celos - HSK 100 motor spindle with 10,000 rpm - Linear drive - 5-axis - IKZ 40 bar / 600 liters - Chip conveyor Gsdszbacaspfx Ai Neiu - Coolant nozzle - Measuring probe - B-axis - Recessed C-axis The machine is being sold on behalf of a customer and will be available from 10/2026. We guarantee full functionality and geometry within new machine tolerances upon acceptance at the customer's site / commissioning at your location. We will gladly plan the delivery, loading, transport, and commissioning for you, all from a single source, with our qualified service technicians. Please contact us. We are not a traditional machine dealer but support our customers in the search for and sale of high-quality used machines throughout the entire process. (Inspection, purchase, refurbishment, transport, disassembly, loading, etc.) Everything from a single source, with a guarantee and transparent processes. If you are also looking for a used DMG MORI machine or want to sell your machine in the best possible way, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2006, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, Travel paths Longitudinal (X): 2500 mm Vertical (Y): 1250 mm Transverse (Z): 1000 mm Table size (rotary): Length: 1000 mm Width: 1000 mm Max. table load: 5000 kg T-slots: 6 x 22 mm H10 Drive power: 100% duty cycle, 24 kW Tool holder: ISO 50, DIN 69871 - AD Spindle speeds: 20 – 4000 rpm Torque: 479 Nm Feed rates (X, Y, Z): 10 – 10,000 mm/min Rapid traverse (X, Y, Z): 25,000 mm/min Weight: approx. 15,000 kg Equipment: - Internal coolant supply according to DIN 69871 Form AD, including minimum quantity oil lubrication with 15 different dosing levels via programmable M-functions; 20 bar - NC rotary table, size 1000 x 1000 mm, integrated as 4th axis into the CNC control. Max. load capacity 5000 kg, positioning accuracy ±5", table surface with 22 mm T-slots. - Chip conveyor for TA-D 25 - Tool changer Accessories - Front-mounted movable control pendant including Heidenhain iTNC 530 control (1 processor) - Portable electronic handwheel HR 420 with 3 m spiral cable (option) Gisdpfeykbxzex Ai Nou - 3D thermal expansion compensation - Automatically indexing milling head / 2 planes with 2.5° indexing (H200) (option) - Distance spindle nose to table edge: 250 mm - NC rotary table, size 1000 x 1000 mm, integrated as 4th axis into the machine control. Max. load capacity 5000 kg, positioning accuracy ±5", table surface with 22 mm T-slots - Coolant system with 150 l tank capacity, delivery pressure 5 bar, delivery rate 50 l/min, discharge via shower ring around spindle - Splash guard enclosure, fully enclosed on 4 sides with front sliding doors and an additional sliding door on the left side column and viewing windows on all 4 sides - Heidenhain drive motors on all axes with digital drive technology - INA linear roller guide system on all axes - Direct linear measuring system Heidenhain on all axes - Telescopic covers for X-axis guideways - Ball screws on X, Y, and Z axes - Automatic cycle lubrication for all axes and moving components - Electrical equipment by Siemens - Hydraulic system by Vickers

Condition: good (used), Year of construction: 2005, travel distance X-axis: 12,000 mm, travel distance Y-axis: 3,500 mm, Technical Specification - X-axis (longitudinal travel - table): 12,000 mm - Programmable feed rate: 0.5 – 6,000 mm/min - Rapid traverse: 20,000 mm/min - Motor speed: 3,000 rpm - Y-axis (vertical travel / column): 3,500 mm - Programmable feed rate: 0.5 – 6,000 mm/min - Rapid traverse: 20,000 mm/min - Motor speed: 3,000 rpm - Rated torque (motor): 42 Nm Z - W-axis (spindle head): - Boring spindle diameter: 150 mm Gsdeyuxd Njpfx Ai Noiu - Axial stroke of boring spindle (Z): 1,200 mm - Rapid traverse Z-axis: 20,000 mm/min - Internal taper of boring spindle: DIN 69871, ISO 50 - Spindle diameter: 254 mm - Spindle front bearing inner diameter: 200 mm - RAM dimensions: 400 x 400 mm - Axial stroke of boring spindle (W): 1,000 mm - Rapid traverse W-axis: 15,000 mm/min - Total axial stroke (Z+W): 2,200 mm - Rated torque spindle motor W and Z-axis: 42 Nm - Number of spindle gearbox speeds: 2 - Spindle speed range: 6 – 3,500 rpm - Spindle motor power: 60 kW Clamping plate sections: - Dimensions: 2 units @ 1,500 x 4,500 mm, 1 unit 2,000 x 4,500 mm - Load capacity: 15,000 kg/m² Workpiece table (axes V1 - B1 / V2 - B2): - Table dimensions: 2,000 x 3,000 mm - T-slot size: 28 mm - T-slot pitch: 180 mm - Table top height from floor: 650 mm - Load capacity: 40 t Tool rack magazine ATC 13-150 R 147 - Maximum magazine capacity: 147 tools - Maximum tool weight: 35 kg - Maximum tool length: 700 mm - Tool taper: DIN 69871 - Tool change time: 28 sec Milling head with indexed vertical axes, model TTL 2 18 360 - Tool holder: ISO 50, DIN 69871 EQUIPMENT: - CNC control: Heidenhain iTNC 530 - Electronic handwheel - Chip conveyor (manufactured: 2023) - CE marking - Documentation

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 20194, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, power: 49 kW (66.62 HP), Features High rigidity for heavy-duty machining Large table for oversized workpieces CNC control with HEIDENHAIN TNC 530 for precision operations Automatic tool changer with 50 positions Centralized lubrication and hydraulic system Gedpsx S Hgzsfx Ai Neiu