CNC Milling Machine

Geiss AG FZ 1000x800 ECO

Condition: used, Year of construction: 2007, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 Dedstqdxfopfx Acnskr MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Condition: good (used), total length undivided: 3000 mm Dkedpfxohwwfxj Acner edge heigth: 90 x 90 mm

Condition: reconditioned (used), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual feeding): 12 mm Max. sheet thickness (automatic feeding): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total power consumption: approx. 64.0 kW / 115 A Technical features: - Siemens Simatic S7-300 control, OP 37 panel - Air-conditioned control cabinet - Top heater with 5 temperature control circuits via pilot emitters - Bottom heater with 5 temperature control circuits via pilot emitters - Individually switchable top heating elements - Individually switchable bottom heating elements - Parallel clamping frame - Pneumatic motor locking for the upper reduction frame - Cylinder locking for the lower reduction frame - 4 cooling fans - Adjustable vacuum for the lower table via cascade control - Pre-blow and demolding adjustable via cascade control - Large front opening for tool change - Film sag control by photocell with support air - Automatic tool change system Lower table: 1. Tool clamping via vacuum 2. Tool change via pneumatically operated ball rollers Upper punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-change system for tools Sheet feeding: - Automatic motorized lifting of the film transport chain - With pneumatic quick-clamping system for vacuum plates - Motorized centering of plastic sheets - Separate vacuum pump for grained material Optional preheating retrofit: Djdpewf Dvaofx Acnjkr - Pneumatically moved top heater, complete zone control, each emitter individually switchable via toggle switch - Pneumatically moved bottom heater, complete zone control, each emitter individually switchable via toggle switch - Temperature control of top and bottom heating via separate heating controllers in the BE control cabinet (temperature setting not via UA control panel) Optional retrofit for roll processing: - Cross cutter and feeding rollers in feed area - RO 800 roll stand

Condition: ready for operation (used), Two Machines Flake Purifier+ C 512 HR Color Sorter & Flake Purifier+ N 1024 Sesotec Polymer sorter Specs on Flake Purifier+ C 512 HR Color Sorter Refurbished in 2021 Dsdexlknmepfx Acnokr Technical Data Throughput up to (kg/h) Up to 3.8 Suitable grain sizes 2 - 20 mm Power (max. KVA) 3.4 Temperature range +5"C to + 40"C Weight 1300 to 1500 kg Electrical connection Power connection cable 5x4 mm2 Electric fuse 16 A Protection class IP 54 Rated current (max. A) 5 Specs on Flake Purifier+ N 1024 Sesotec Polymer sorter Technical Specifications • Working width: 1024 mm • Nozzle grid / valve spacing: 3.2 mm • Number of valves: 160 high-speed air-eject nozzles • Detection resolution: 2 mm (optical) / 16 mm (metal) • Metal detection sensitivity: Fe ≈ 0.6 mm | Al ≈ 0.1 mm • Throughput capacity: up to 3 – 3.8 t/h (depending on material and sensor setup) • Sorting technology: CCD color camera + metal detector (“CM” configuration) • Particle size range: 2 – 20 mm • Separation method: Compressed-air blast via precision valve array • Enclosure rating: IP 54 • Power requirement: ≈ 3.4 kVA | 230 V, 50 Hz • Operating temperature: +5 °C to +40 °C • Purity achievable: up to 99.999 % (depending on configuration) • Control system: Touch-screen interface with VISUTEC software (optional remote monitoring via VISUDESK) • Modular design: Expandable to include NIR sensor (“N”) or additional sorting modules

Condition: used, functionality: fully functional, Machine DU 1500 x 1000 x 620 T7 No. 98 15254 Plate size: 1000 x 800 mm, Draw depth: 620 mm Year of manufacture: 1998 Rated current: 238 A Total connected load: 164.5 kW Control system: Siemens OP 37 Equipment: • Loading/unloading machine • 6 cooling fans Dkjdpfsxmgvcox Acnor • Upper punch • Film sag control • Motorized adjustable clamping frame • Flash emitter • Heating pyrometer • Cooling pyrometer

Condition: good (used), functionality: fully functional, Used stainless steel auger for sale. This auger was used for dipping diced potato in a preservative before packing but not limited to this. Dedpfxjvkxims Acnekr

Condition: new, Year of construction: 2024, operating hours: 50 h, machine/vehicle number: 305, Available: February 2023 Control: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with T-slots across every 250 mm Max load: 1000kg distributed over the entire surface 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 min-1 Dkodpjwwq Hcjfx Acnor Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blowing air / MMS: outside Drives linear axes Feed speed X and Y axes: up to 50 m/min Z-axis feed rate: up to 30 m/min Color Housing, portal, control cabinet: light gray Z-slider and milling head: orange Additional equipment - 15-way tool changer - Control in a separate, rollable desk

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, Longitud de entrada // Intake length: 2200 mm Anchura de entrada // Intake width: 2000 mm Longitud de rotor // Rotor length: 2000 mm diam. rotor // rotor diam.: 495 mm Dedei Elylspfx Acnokr n.º de cuchillas // n. of knives: 56 (60x60) velocidad del rotor // rotor speed: 125 rpm potencia motor // main motor power: 132 kW voltaje // voltage: 400 V frecuencia // frequency: 50 Hz Peso de la máquina // machine weight: 14000 kg * Máquina especialmente diseñada para la trituración de plásticos, los rodamientos del rotor están completamente aislados. * Máquina completamente reconstruida; 1 año de garantía ó 2000h, lo que antes suceda * Incluye: - Rotor de repuesto - Sujetador superior; ideal para la trituración de residuos voluminosos de baja densidad - Soporte de acero - Tolva de alimentación - Cuadro de control eléctrico - Planos de implantación disponibles, asi como plano de soporte de máquina y tolva de alimentación - Manual de instrucciones & esquemas eléctricos Includes: - Machine supplied with bridge breaker (upper feeder); suitable to shredd bulky waste with low density - Machine fully refurbished; 1 year guarantee or 2000h, whatever happens first - Machine specially designed for shredding of plastic waste. - Steel support - Infeed funnel - Electric control pannel - Dimmensional drawings available in Acad for the machine, funnel and steel support - Operation & maintennace mannuals available

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle speeds : 18000 [rpm] - Spindle power : 25 [kW] LINEAR AXES - Travels on X/Y/Z axes : 760 / 510 / 520 [mm] Dkjdey Tzctspfx Acnsr - Rapid traverses rates (X/Y/Z) : 45 / 45 / 40 [mm/min] A ROTARY AXIS - Travel : -110 / +30 [°] - C ROTARY AXIS - Travel : 360 [°] - Rapid traverse rate : 25 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : Ø248 [mm] - Maximum weight upon table : 200 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 48 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.940 x 4.060 [mm] - Machine height : 2.865 [mm] - Machine weight : 6000 [kg] EQUIPMENT - CNC : Hurco WinMax / MAX5 - Interactive programming - Electronic handwheel - Coolant tank * with high-pressure pump - Coolant through spindle - Chips conveyor - Spindle cooling unit

Year of construction: 2000, condition: ready for operation (used), Model: GEISS U8 (nominal size 1000 × 1500 mm) Dksdsxwp I Njpfx Acnsr Sheet size: 1000 × 1500 mm (feed) Max forming area: approx 1460 × 960 mm (subject to verification) Draw depth: ~400 mm Working height: ~1140 mm Features: Closed-chamber vacuum forming machine; stepless adjustable clamp frame; integrated vacuum system; cooling fans with water-mist; window plate adjustment; suitable for sheet/roll feed.