Used Gallmac Wmw 115 for sale (458)

Condition: ready for operation (used), Type: Ti 1800 Isdpfxjxpgkls Aacstn Turning table 1800 x 2000 mm Cap on Table: 15.000 kg 360° turnable cross displacement: 1250 mm 6 kW T-slot width: 28 mm T-slot distance: 160 mm Length: 3700 mm Width: 2100 mm Weight: 7600 kg Dia / Dimensions: 1800 x 2000 mm

Condition: used, Manufacturer: WMW Type: DLZ630III5000 Centerdistance: 5000mm Turningdiameter above bed: 700mm Spindle-height: 350mm Itodpjwnhx Rsfx Aacon Spindle-hole: 70mm Motorpower: 15,5kW Spindle-speed: 28-1120rpm - Drive system: Conventional - Power [kW]: 15.5 - Centre height [mm]: 350 - Swing over bed [mm]: 700 - Distance between centres [mm]: 5000 - Spindle bore [mm]: 70 - Min. spindle speed [rpm]: 28 - Max. spindle speed [rpm]: 1120 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1965, condition: good (used), Radial drilling machine BR 56 x 1600 Year built: approx. 1965 (estimate) equipped with coolant device and drilling table as special accessories Technical data: see data sheet as appendix Iedpfjd R Sh Rex Aacetn

Condition: good (used), Reamer, twist drill, drill -Twist drills: different sizes on request Itodpfx Ajv H D N Roacjn -different manufacturers -Price: Ø 10 - 30 mm 0.50 EUR/mm (drill Ø 20 mm = 10 EUR net) -Price: Ø 31 - 45 mm 1 EUR/mm (drill Ø 35 mm = 35 EUR net) -Price: Ø 46 - 80 mm 1.60 EUR/mm (drill Ø 50 mm = 80 EUR net) -Two-cutter -Diameter: 10-80mm -different lengths -Recordings: MK1 - MK6 -Type: HSS

Condition: good (used), machine/vehicle number: 98260075, one used profile steel shear WMW Punching capacity 420kN(42Tons) throat of the punch 320mm flat steel shear shears 100x18mm bar shear shears solid material round/square 36/30mm Further technical data on request. Itedpfx Aob Ilbfsacon

Condition: ready for operation (used), Year of construction: 1965, Immediately available ex site: Hydraulic C-frame press WMW Zeulenroda Type PYE 160 S Year of manufacture: 1965 Completely overhauled in 2006 Press force: 160 t Table: 900 x 620 mm Distance table – ram: 800 mm Ram stroke: 500 mm Ram down (rapid traverse): 200 mm/s Ram up: 125 mm/s Itsdpfxjxn Rx Dj Aacjn Drive: 17.5 kW Weight: 8.5 t Price: EUR 4,000—plus VAT, ex site

Condition: ready for operation (used), Type: Ti 1800 Turning table 1800 x 2000 mm Cap on Table: 15.000 kg 360° turnable cross displacement: 1250 mm Isdpfx Aasxpgkrecetn Rotary table dimensions: 1800 x 2000 mm Max weight on table: 15 000 kg

Condition: used, Price: On request Drilling machine, horizontal boring machine  Model: Conventional Manufacturer: WMW Union Type: BFT 90/3-2 Including rotating table Including digital readout Including multiple belongings X-Z travel: 1600x1000 Y-travel (up-down): 1050mm W-travel: 710mm Spindlemotor: 11kW Spindle diameter: 90mm Spindlespeed: 8-1600 rpm Table: 1000x1120mm Machine-weight: 9000kg - Documentation available: No - Serial number: 90/3-2 Financial information VAT: The price shown is exclusive of VAT Itsdpfswnhi Aox Aacen VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Heckert CWK 400 Isdpforu H T Ijx Aacjtn Year of construction 1995 Control Siemens 840 Travel X/Y/Z 650/650/680 mm Spindle speed up to 10,000 rpm HSK 40 Tool changer Rotary table 400 x 500 mm, chip conveyor Weight 12.5 tons.

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 2 -Clamping table: 340 x 280 mm -Travel: 350 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 355/710/1400/2800 rpm -Column: diameter 93 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEM 0.8/1.0 kW with brake -Voltage: 380 V -Number: 2x drill available Ijdpfx Aasxm Rzijcstn -Price: per piece -Dimensions: 550/480/H1270 mm -Weight:157 kg/piece

Condition: used, Parallel vice with electric clamp Itodjbwy S Ujpfx Aacjn Jaw width 200 mm

Condition: used, Year of construction: 1985, Bohrleistung in Stahl (-Ø 45 mm throat 1250 mm workpiece height max. 1100 mm swival range ° height adjustment 745 mm base plate surface area 1450 x 920 mm Bohrspindel-Ø/ Aufnahme 90 mm / MK 5 bore spindle stroke 355 mm max. torque on the spindle 250 Nm feed power 14000 N turning speed range 20 - 1200 U/min feed range 0,063 - 0,63 mm/U power capacity 3,7 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, Isdpfx Aovcrmpsacetn • coolant device

Condition: used, Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Iodpfx Aasxnpf Necotn Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Condition: used, Rotary Table WMW Type D 315 k Serial No.: 10930 Table diameter: 315 mm Table height: 135 mm Transmission ratio: 90 : 1 - Hand crank with index plate and lever - Scale ring for reading at the hand crank - Readable degree scale on the rotary table - Swivelling worm for direct indexing - Clamping via clamping lever - 14 mm T-slots in the table plate - Built-in index plate 23-28-33-42-51-61 Itedpoxf Uytefx Aacjn Weight: 85 kg

Condition: good (used), div. face plates from 400 mm - 800 mm Iodeipidhjpfx Aacetn

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 12/1 with base frame -Clamping table: 340 x 280 mm -Travel: 370 mm Itedpfjir E Snsx Aacon -Spindle holder: MK2 -Projection: 215 mm -Speeds: 224/450/900/1800 rpm -Column: diameter 92 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEB 0.4/0.7 kW with brake -Voltage: 380 V -Dimensions: 620/480/H1710 mm -Total weight: approx. 182 kg

Condition: used, Face drivers Make WMW Clamping ranges 30 - 200 mm pmax 3500 kn Short taper size 5 Itodpfx Aecu Ngksacsn

Condition: used, Year of construction: 1985, Bohrleistung in Stahl (-Ø 45 mm throat 1250 mm Isdpfx Aasxddqrocjtn workpiece height max. 1100 mm swival range ° height adjustment 745 mm base plate surface area 1450 x 920 mm Bohrspindel-Ø/ Aufnahme 90 mm / MK 5 bore spindle stroke 355 mm max. torque on the spindle 250 Nm feed power 14000 N turning speed range 20 - 1200 U/min feed range 0,063 - 0,63 mm/U power capacity 3,7 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device

Condition: used, Thread cutting chuck, thread cutting head WMW type GSA 2 Taper: MT 2 Threading capacity: M 5 - M 16 - Adjustable slip clutch Net weight: 3 kg Automatic right/left rotation with holding bar. The machine does not require its own reversing function. The tap is clamped at the shank and the square with adjustable drivers. Both drivers are missing (but can be manufactured relatively easily) For cutting right-hand threads. Iedpfexf Uymox Aacetn

Condition: good (used), tool holder, milling holder, milling tool -Number: 9x SK30 holder -various designs -Drill chuck: face chuck, reducing sleeves, cutter head, shell end mill, spindle tool -with transport box Itsdpfob Eu Swsx Aacon -only sold complete -Weight: 10 kg

Condition: used, Parallel vice with electric clamp Jaw width 275 mm Itedjby Uycjpfx Aacon

Condition: good (used), Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine, milling machine-horizontal Ijdpfx Aexfhvboacetn -Manufacturer: WMW, counter bearing from milling machine -Dimensions: see drawing in the photos -Dimensions: 295/76/H125 mm -Weight: 6.5 kg

Condition: used, self centering hub (5146) Make WMW Itsdpedb Uzxsfx Aacsn maximum 2800 RPM.

Condition: good (used), tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK50 holder -Type: 50 x 50 x 630 mm -Dimensions: Ø 100 x 850 m Ijdpsvcxhgefx Aacetn -Weight: 23.5 kg

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: WMW ABW, thread cutting chuck holder MK3 Isdpfxjxc T Tge Aacotn -Type: GB3 -Dimensions: Ø 80 x 262 mm -Weight: 3.3 kg