High throughput continuous fryer

GEA CFS BRN3000/1000

Condition: good (used), 3m x 1000mm thermal oil fryer with teflon infeed and top hold down belt. Njdpjq Iq Nbofx Aiqscw

Year of construction: 2007, condition: new, functionality: fully functional, UNUSED Complete Potato Processing and Frying Line (2007), Installed But Never Commissioned Capacity: approx. 1,000 kg/hour Njdpfx Aisy Axfkjqecw This is a rare opportunity to purchase a complete European industrial line in near-new condition at a fraction of the replacement cost (>€1.5M). Key Features: - UNUSED – 0 operating hours - Installed but never put into production - Complete line: input → frying → cooling → packaging - High-quality European manufacturers - Immediate availability Main Equipment: - Blancher – Komen-Kuin (UNUSED) - Vibrators – Kiremko / Atraco (UNUSED) - Frying Line – Florigo (UNUSED) - Conveyor Belt – Florigo (UNUSED) - Pre-Refrigeration – Ferguson (UNUSED) - Refrigerator & Control Panel – Ferguson (USED, included) - Packaging Machine – Campagnolo (UNUSED) - Boiler Station – Maxxtec (UNUSED) - Oil Tank – Florigo (UNUSED) - General Control Panel (UNUSED) Condition: The majority of equipment is UNUSED (0 hours). Installed but never commissioned. Location: Greece Availability: Immediate Inspection: Available Dismantling & loading support: Provided Note: Priority will be given to buyers interested in the full line. Serious inquiries only.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Ncjdpfx Aietvau Aeqow Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Year of construction: 2008, condition: ready for operation (used), Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible. Ncsdoxmkc Topfx Aiqew

Condition: used, Dicer Rühle Nedpfx Aisqlbzveqocw Type: SR 1 Dimensions: 90x50x90cm Electrical power: 1.5kW

Year of construction: 2001, condition: excellent (used), Single screw extruder WEBER NE5 1-30:D with 2 co-extr. WEBER ZE30 Year of construction 2001 Screw diameter 50 mm Application:PE-PP, Three-layer pipes or pipes with colored stripes The plant has manufactured heating pipes Condition: very good Ncsdpfx Aishy Tp Dsqew 2 Co-Extruders WEBER ZE30 Screw diameter 30mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Year of construction: 2016, condition: new, 1 unit of a completely overhauled, unused industrial bevel-helical gearbox from ASUG. TGL 21815. All gearbox parts have been replaced, with the exception of the housing!!! Clutch: 800 mm (only one half available) Maximum torque: 27,829 Nm Ncedpfjgwlrdjx Aiqow Gear ratio: i = 1:80 Maximum power: 51 kW Oil capacity: 170 kg Speed: n1 = 1400 Speed: n2 = 17.5 Weight: 1450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Overall height h2: 925 mm Length of base: 1170 mm !! The gearbox does not have an oil cooler !!

Condition: used, System: used piston diaphragm pump / pump Ncedpfxedkdi Ts Aiqew Type: HMD-G-50-500 Flow rate: 40.0 m3/h Pressure: 1,6 MPa

Condition: like new (used), Stainless frame, belt dimensions 1200mm x 150mm, aperture 200mm x 70mm, stop/start, with alarm, 3Ph Ncjdpfx Aiofhdu Tsqsw

Condition: used, functionality: fully functional, total length: 2,750 mm, total width: 1,650 mm, total height: 2,630 mm, overall weight: 1,800 kg, The GEA Multi Former MLF 400 is a state-of-the-art machine designed to shape a wide range of food products with precision and efficiency. Thanks to its advanced technology, it guarantees fast, uniform production, ensuring high output while maintaining consistent product quality. In fact, this former is ideal for products such as dumplings, hamburgers and patties, with a flexibility that easily adapts to different types of raw materials. What's more, the GEA Multi Former MLF 400 is designed to maximize production efficiency, while minimizing material waste. Moreover, its intuitive, ergonomic operation makes it easy to get to grips with, reducing downtime. What's more, this machine is built to meet strict hygiene and safety standards, making it easy to maintain and guaranteeing clean, continuous production. In short, the GEA Multi Former MLF 400 is a reliable, high-performance solution for food companies seeking to optimize their manufacturing processes while ensuring consistent, high-quality results. Technical specifications: Type: 400 MLF Hopper capacity: 320 L Maximum forming weight: 1.1 Kg. Maximum output: 65 cp/min. Belt speed from 1.5 to 15 m/min. Output height from 1015 to 1143 mm. Machine weight: 1800 Kg. Power: 23 kW. Air supply 6 bar, 300 L/min. Water supply: 4 bars. Noise level 84.5 db. Dimensions (L x W x H) : 2752 x 1652 x 2636 mm PLC programming. Ncsdpou E Rgkefx Aiqow