Precision cycle lathe

GDW C 280 Z

Condition: good (used), functionality: fully functional, quill stroke: 190 mm, spindle speed (min.): 41 rpm, spindle speed (max.): 1,800 rpm, overall weight: 1,920 kg, workpiece weight (max.): 17 kg, sheet thickness steel (max.): 32 mm, torque: 250 Nm, table height: 900 mm, branded DONAU high speed radial drilling machine type DR 32 - completely overhauled by vaumatec in 2022 - with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain as well as 4 adjustable feet to relieve the table frame) Technical data: Drilling capacity into solid material: St 60/E335 mm Ø 32 (at feed rate 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Tool holder: MK4 Column diameter: mm Ø 195 Distance between spindle nose and table: min./max. mm 260/660 Work table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds Speed series I : rpm. 41-1800 Feed rates: mm/rev 0.1-0; 15-0; 20-0.3 Torque at the spindle: max. Nm 250 Smooth running of the boom: Radial N 25 Smoothness of the arm: Axial N 25 Clamping effect: Radial Nm 3500 Clamping effect: Axial N 5500 Feed force: N 7500 Max. permissible mass: kg 17 Max. permissible moment of inertia: kgm 0.002176 Workpiece: max. table load: kg 1000 Center of gravity: in the middle of the work surface Tjdpfx Aern Riqohusf

Condition: good (used), Year of construction: 2010, LZ-Lathe Fabr.JET Type :GHB-1330 Bj.2010 with 3 ash digital indicator, 3 jaws lathe chuck DM 160 mm tool holder Multifix size A, 2 steady rests coolant device. Turning diameter overbed: 330 mm Turning diameter over face: 197 mm Center width: 750 mm Spindle speeds: 70-2000 rpm Tjdpfxsqwgzqo Ahuof spindle bore : 38 mm Machine in good condition from the training workshop Machine documentation available .

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, spindle bore: 83 mm, turning length: 1,000 mm, turning diameter: 570 mm, turning diameter over top slide: 340 mm, quill diameter: 80 mm, quill travel distance: 200 mm, overall weight: 3,200 kg, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, The machine is in very good condition. Immediately available! Tjdpfxjwxw S Is Ahujf Can be tested under power.

Condition: new, WM180V - ROGI vario metal lathe 230V-1Phase Turning diameter above bed ----- 180 mm Turning diameter above cross support ----- 110 mm Center height ----- 90 mm Center distance ----- 300 mm Bed width ----- 100 mm Cross support travel ----- 75 mm Reverse motion of tool support ----- 55 mm Permeate main axis ----- 21 mm Main shaft connection ----- MK3 Speed range spindle ----- variable 50 - 2500 rpm Thread cutting withworth ----- 10 - 44 TPI (8) Thread cutting metric ----- 0.5 - 3 mm (10) Travel pinole ----- 60 mm Diameter pinole ----- 30 mm Pinole fitting ----- MK2 Motor power ----- brushless 600 Watt Weight ----- 60 kg STANDARD ACCESSORIES * 3 chuck 100 mm - self-centering * 4-way chisel holder * Drip tray * Back panel * Shielding chuck * Shielding spindle * Chisel support shield * Set of casters * Digital speed readout * Fixed centers Tsdpfx Ahjga T Ebsuof * Left / Right switch * Tools in a box OPTIONS * Independent 4-jaw chuck 100 mm * Flange for 4-jaw chuck 100 mm * Fixed glasses * Moving glasses * Fixture plate 170 mm * Support box * TOOA0 quick-change chisel holder * Rotating chisel set

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 8044000703A, Siemens 840 D Control Country of manufacture: EU - Poland Voltage: 400V Dimensions: 3082x2260x1775 mm (with chip tray) 4228x2260x1775 mm (with chip conveyor) Machine net weight: 3400 kg TECHNICAL SPECIFICATIONS CTX 310 ecoline V1/V3 New Design Working capacity Max swing over bed: 330 mm Swing over cross-slide (X): 260 mm Max turning diameter: Ø 200 mm Chuck diameter: Ø 210 mm X-axis travel: 182.5 mm Z-axis travel: 455 mm Centre height: 190 mm Centre distance: 581 mm Feed drives Rapid traverse X and Z axes: 30 m/min Todpfxow T Sqye Ahujf Control: Siemens Sinumerik 840D Slim Line C axis with Siemens control Speed: 0 – 100 rpm Torque: 112 Nm Accuracy: < 0.04° Spindle Spindle nose: 140 h5 mm Front bearing diameter: 100 mm Spindle bore: Ø 74.3 mm Max bar capacity: 51 mm Main drive with Siemens control Drive power (40% / 100% duty cycle): 16.5 / 11 kW Torque (40% / 100% duty cycle): 166.5 / 112 Nm Max speed: 5,000 rpm Turret Number of tool stations: 12 Tool interface: DIN69880 (VDI 3425) Disc diameter: 30 mm Change time (with locking): 0.95 sec Change time (without locking): 0.4 sec Tool turret with Siemens control Number of driven tools: 12 Drive power (40% duty cycle) at 4000 rpm: 8.4 kW Torque (40%): 20 Nm Max speed: 4,500 rpm Tailstock Automatic travel: 396 mm Quill bore: flange Max quill force: 400 daN Hydraulic unit Tank capacity: 50 L Max pressure: 50 bar Coolant system Tank capacity: 175 L Capacity with conveyor: 200 L Pump power: 0.85 kW Pump flow rate at 5 bar: 30 L/min Electrical connection Max power: 21 kVA Current: 400V Frequency: 50-60Hz Fuses: 33A Pneumatics Compressed air connection: 6 bar Environmental conditions Room temperature: +15 to +35°C Max humidity: 75% All information is provided without obligation and subject to possible errors or omissions.

Condition: good (used), Year of construction: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Just approx. 1,000 spindle hours since spindle replacement Machine total approx. 20,500 hours Spindle replaced in 2024 (18,000 rpm) Geometry realigned in 2024. Travel axes: X 650 / Y 850 / Z 500 mm Rotary table: 360° infinite Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle interface: HSK-A63 The machine is equipped as follows: 60-position tool changer Through-spindle coolant (20 bar) with belt filter system Compressed air through the spindle Kessler rotary table, diameter 500 mm Infrared 3D part measurement probe Tool measurement via BLUM laser Rotating inspection window POS DCM collision module Mobile electronic handwheel Oil mist extraction system Tedpfswz I Acjx Ahuef Heidenhain linear measurement system X, Y, Z Purge air for all linear measurement systems Active control cabinet air-to-air cooler Active cooling for 4th + 5th axis, controlled Network connection + USB port Controlled spindle cooler Heidenhain rotary measuring system Contour protection POSkontur External hinge belt chip conveyor Coolant pump at the head, operated via M-functions Pump for chip flushing device Chip flushing device Machine status indicator light Spindle air purge Electromechanical oil/coolant separator Automatic coolant level monitoring 3-fold media interface in the center of the table Hydraulic unit incl. control via M-function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + Through-spindle coolant unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry was set (guides repaired and adjusted). Since then, the machine has seen only minimal use.

Year of construction: 2017, condition: ready for operation (used), Laser power: 10kW (10000W), working range: 3000mm/1500mm, max. material thickness: mild steel: 25mm, stainless steel: 30mm, aluminum: 30mm, copper: 12mm, brass: 15mm. Positioning speed: 120m/min, positioning accuracy: +/-0.05mm, max. workpiece weight: 1100kg. Machine dimensions X/Y/Z: approx. 9500mm/3500mm/3500mm, suction dimensions X/Y/Z: approx. 1500mm/1500mm/4000mm, machine weight: approx. 12000kg, operating hours: approx. 17000h. Documentation available. On-site inspection is possible. Expected to be available from June 2025. Tsdpfjvyiqgsx Ahuef

Condition: good (used), Morsoe miter punch, machine number 48706, in good condition, available immediately. If you are interested, we will also inform you about other machines in our house. You are welcome to visit the machine in our house by appointment. Todpfx Ahjh Aka Iouef

Condition: new, WMD30LV - 230V / 1F Drilling capacity steel ----- 32 mm Milling capacity steel ----- 20 mm Flute cutters ----- 76 mm Motor ----- brushless 1.5 KW Spindle speed stepless 50 - 3000 rpm Spindle stroke ----- 70 mm Spindle mounting ----- ISO 30 Worktable ----- 840 x 210 mm Cross travel ----- 220 mm Longitudinal displacement ----- 565 mm T-slots ----- 3x14 mm Unloading ----- 240 mm Distance spindle - table ----- 470 mm Weight ----- 230 KG STANDARD ACCESSORIES * Drill head incl. drill chuck * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right switch * Milling head left / right 90 degrees rotatable * Toolbox Todpega T Agsfx Ahuof OPTIONS * 3-axis digital readout * Base cabinet * Automatic longitudinal feed * Milling clamp * ISO30 Collet holder & 12 collets in case * Milling set

Condition: used, Year of construction: 2015, Technical details: x-travel: 960 mm y-travel: 600 mm z-travel: 480 mm rotary table:: D 350 mm table load: 200 kg spindle turning speed range: 12.000 1/min drive capacity - spindle motor: 14/10 kW control: HEIDENHAIN iTNC 530 rapid traverse: 32 / 32 / 24 m/min Tool changer: 30- fach spindle taper ISO: BT 40 weight of the machine ca.: 7,4 t total power requirement: 45 kVA dimensions of the machine ca.: 3,1 x 2,3 x 3,1 m 5-axis simultaneously universal-machining center, NC-rotary-swivelling table dia. 350mm, A-axis (120/-42°), C-axis 360°, Internal coolant supply, el. handwheel, Todperm Txbjfx Ahuef chipconveyor, direct measuring system, Hour meter: approx. 9.000 h "machine on", approx. 3.500 h "spindle on" *