Hot runner controller

Günther DPT 5

Condition: new, bore capacity in steel (diameter) 40 mm throat 370 mm bore stroke 200 mm spindle taper MT 4 MK table: 580 x 460 mm column diameter 160 mm turning speeds 75 - 2020 U/min feeds 0,1 - 0,2 - 0,3 - 0,4 mm/U Giodpfx Aof Nb E Rji Nju total power requirement 1,5 kW weight of the machine ca. 700 kg. range L-W-H 1,1 x 0,6 x 2,35 mm • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment

Year of construction: 2018, condition: ready for operation (used), Diameter of process lines/regeneration drain lines/compressed air lines: 50mm/50mm/8mm, max. inlet temperature: 34°C, max. hardness: 10/20°Fr, min./max. operating pressure: 2bar/8bar, min. degree of filtration: 5µm, max. glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, max. tank volume: 30dm³-200dm³, max. Glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, tank volume: 30dm³-200dm³, max. compressed air consumption: 300l-500l/h, machine dimensions X/Y/Z: approx. 800mm/650mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Gisdpfeuk I Etox Ai Nju

Condition: new, Year of construction: 2025, General: -Temperature range max. 150°C for OeL (heat transfer fluid) -robust sheet steel housing -device on rollers Gijdsddv Itopfx Ai Nju Hydraulics: -sealless immersion pump -Qmax. 60 l/min. - Pmax. 3,8 bar -Tank and heater made of stainless steel -Heating capacity 9 kW -Tank capacity ~20 liters -fittings made of brass/stainless steel -manual oil filling -mechanical level control -indirect cooling system (tubular spiral heat exchanger) -cooling capacity ~40.000 kcal/h -manometer -bypass -solenoid valves for cooling Electrical and control system: -Electronic PCB control -Solid State Relay -Safety thermostat -failure monitoring -Connection cable with plug Available in approx. 4 weeks!

Condition: new, New equipment MASS International NS3 Speciale Angled conveyor belt with separator Available at short notice Example as pictured: L-shaped conveyor with double roller separator Infeed section: 600 mm Inclined section: 1300 mm Usable width: 450 mm Outer width: 505 mm (without motor) Height-adjustable discharge height: 750 - 1050 mm Adjustable angles both in the infeed section and incline Black PU belt with cleats Cleat height: 20 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on steerable braked castors Side collection plates in the infeed section Godpfsd Tidxox Ai Neiu Optionally also available as angled conveyor with Supergrip belt and separator (see last two photos) Double roller separator with covered belt drive fitted with Super Grip Adjustable discharge chute

Condition: new, New device MASS International Conveyor belt NI 1 Conveyor belt/unloading conveyor Angle-adjustable conveyor belt with hopper in the feed section available at short notice Example: NI 1 Length 1500 mm Giodpfx Aijh Nyp Ue Nju Effective width 250 mm Outer width 305 mm (without motor) Height-adjustable dispensing height 600 - 1000 mm Variable inclination adjustment Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m /min mobile on steerable stop rollers Optional: Dimensions on customer request FDA compliant belt Modified belt speed etc.

Year of construction: 2021, condition: new, machine/vehicle number: 2021052701, Aluminium flat belt conveyor without substructure conveyor belt length: 6000mm drive roller: knurled deflecting roller: crowned Gjdog D T N Hspfx Ai Njiu PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC blue FDA compliant according to EU10/2011 Belt width 500mm outside corrugated edge welded on both sides 40mm high T-30 cleats (61 pcs) - 200mm pitch * antistatic due to threads in the fabric of the running side endless welded with stepped finger joint food certificate is included V2A stainless steel underlay plate full surface drive: motor approx. 1,1KW - horizontally lying * optionally controllable with frequency converter connection 220/

Year of construction: 2004, condition: ready for operation (used), Refrigerant: 407C, connected load: 84.8kW, length: 1066mm, width: 695mm, height: 1698mm, weight: 1.367t. On-site inspection is possible. No known defects. Giodpfx Aou Av Hdsi Neu

Condition: new, New machine MASS International Gedpfxou Ti Tvj Ai Noiu Color Mixer / Batch Mixer Mixer for plastic granulates Available for prompt delivery from stock Example: Mixer MV 2 Steel construction Capacity: 200 liters / 120 kg granulate Length: 700 mm Width: 700 mm Height: 1050 mm (including control panel 1250 mm) Mobile on lockable swivel castors Dual extraction ports for suction lance, Additional discharge opening at the bottom, Safety switches on inlet cover and discharge opening, Height adjustable in 25 mm increments, Inspection window for fill level monitoring Control via control panel Interval and continuous mixing modes adjustable Description: MV batch mixer for thorough blending of the entire plastic granulate batch. Ideal for incorporating additional components such as color masterbatch, additives, fillers, etc. Due to the forced guidance by the screw sleeve, the entire plastic granulate is continuously moved inside the mixer and becomes quickly and completely blended with the added components. There are no "dead" corners that remain unmixed, as is often the case with conventional screw mixers or agitators.

Condition: excellent (used), Year of construction: 2013, Conveyor belt MTF TECHNIK , length of the vertical part 1,05m, length of the horizontal part 1,02m,belt width 21,5cm , height 0,93m, bars height 2cm, year 2013 Gjdpfx Asv Iz Efoi Neiu

Condition: good (used), Year of construction: 2003, CNC controller: MSX-501 Axes X-axis travel mm: 630 Y-axis travel mm: 600 Z-axis travel mm: 670 B-axis degrees: 360º (0.001º indexing) Feed rates m/min: 50 Rapid traverse m/min: 50 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: ø800x1,000 Max. workpiece weight kg: 500 Spindle Spindle speed rpm: 8,000 Gedpoxq Hckjfx Ai Noiu Spindle drive power kW: 18.5/22 Tool system Tool holder: ISO-40 Tool magazine slots: 60 Equipment Chip conveyor Signal lamp High-pressure pump Internal coolant supply