Injection Moulding Machine

Ferromatik K 110 1100-493/Arburg 270 M 500-90

Condition: good (used), Year of construction: 1992, Fanuc Fanuc automatic press Lodpfx Aoh R Npxspmehi AC 100 Closing force: 100 tons Year of manufacture: 1992

Year of construction: 2012, condition: ready for operation (used), This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information. Lodpfx Ajx D Rq Eepmohi Application Types Injection Moulding

Condition: good (used), Year of construction: 2010, functionality: fully functional, conveyor belt length: 3,100 mm, conveyor belt width: 290 mm, conveyor belt speed: 30 mm/s, total length: 2,400 mm, total width: 650 mm, total height: 2,300 mm, overall weight: 160 kg, discharge height: 2,170 mm, power: 0.22 kW (0.30 HP), input voltage: 270 V, input frequency: 50 Hz, motor manufacturer: DRdrivers, Manufacturer: Trio-Technik Year of manufacture: 2010 Overall dimensions (LxWxH) in mm: 2,400 x 650 x 2,300 Width incl. side panel in mm: 400 Width incl. drive in mm: 600 Side height in mm: 200 Total conveyor length in mm: 3,100 Conveyor length, horizontal in mm: 800 Conveyor length, vertical in mm: 2,300 Conveyor width in mm: 290 Belt type: Plastic slats / link chain belt Belt width in mm: 300 Treads (height of treads/tread pitch) in mm: 50, 360 Substructure: Rollable Height adjustable: / Sliding surface: Steel Ledpfxjycr Tgj Apmshi Inlet height in mm: max: 280 min: 250 Outlet height in mm: max: 2,170 min: 2,140 Drive: Head drive Motor type: Gear motor Motor manufacturer: DRdrives Motor data: 50/60 Hz, 0.18/0.22 kW, 230/270 V Motor position (in conveyor direction) left Conveyor speed in m/s: 0.03 Net weight in kg: 160 Special features: Programmable, digital cycle control, incl. CEE plug Condition: used / fully functional Function test: OK

Condition: used, Year of construction: 1991, operating hours: 2,000 h, Name: Used injection molding machine Ljdpoxl R Sxjfx Apmjhi Manufacturer: Ferromatik Milacron (Klöcker) Type: FX50 R 35 Year built: 1991 Hours of operation: 2000 h Driving force: 15 kW Dimensions: L 4300 x W 1400 x H 2200 mm Empty weight: 3400 kg Technical doc.: Yes Message: General Data: Dry cycle rate: 40 min, Pump drive: 15 kW, Total connected load: 25.7, Oil tank capacity: 180 L Injection unit: Screw diameter: 35 mm, Injection pressure: 1730 bar, Displacement: 116 cm3, Screw stroke: 120 mm, Maximum part weight: 99 g, Maximum injection flow: 505 g/s, Calculated injection capacity: 15 kW, Plasticizing flow: 29 g/s, Screw length: 22 LID, Maximum screw speed: 430 min, Maximum screw torque: 360 Nm, Installed heating capacity: 10.7 kW, Number of heating zones: 5, Nozzle compression force: 65 kN Clamping unit: Clamping force: 500 kN, Mold opening stroke: 350 mm, tool installation height min.: 200 mm, platen distance max.: 550 mm, ejector force: 34 kN, ejector stroke: 150 mm, clear distance between columns max.: 355×355 mm, clamping plate max.: 540×540 mm. Accessories: With two tool tempering devices. Condition: Second hand Price: By request

Condition: good (used), Year of construction: 2006, Robot handling Geiger GHS LS 10 X= 300mm Y= 1000mm Z= 1900mm B + C year: 2006 Lhjdpfjtphq Sex Apmji price: 6.450 € contact: Mr. Rainer Eckerle

Year of construction: 2004, condition: ready for operation (used), Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software. Lsdpfx Apsp S Srhemshi

Condition: ready for operation (used), Year of construction: 2016, operating hours: 600,230 h, clamping force: 600 kN, overall weight: 6,300 kg, Hydraulic injection moulding machine manufactured in 2016. This Netstal Synergy 600-230 features a clamping force of 600 kN and an injection force of 182 kN. It has an operating pressure of 210 bar and an opening stroke of 0-350 mm. If you are looking to get high-quality injection moulding capabilities, consider the Netstal Synergy 600-230 machine we have for sale. Contact us for further details regarding this machine. • Operating pressure: 210 bar • Injection pressure: 150 bar • Injection force: 182 kN • Opening stroke: 0–350 mm • Mould installation height: 200–500 mm • Protection class: IP54 • Power supply 1: 3PH+E, 400 V, 50 Hz • Nominal current supply 1: 29 A • Short circuit current (supply 1): 20 kA • Power supply 2: 3PH+MP+E, 400 V, 50 Hz • Nominal current supply 2: 120 A Lodpsy Dr Nfsfx Apmehi • Short circuit current (supply 2): 20 kA • Pump motor power: 15 kW • Heating power: 13.66 kW • Total connected load: 65.1 kW • Total connected load (alternative): 62.4 kW • Socket F11: 400 V, 9 A • Socket F12: 230 V, 20 A • Socket F110: 230 V, 10 A