Wood Chipper Shredder

Ferrari

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 9,800 h, load capacity: 45,000 kg, lifting height: 15,100 mm, fuel type: diesel, power: 257 kW (349.42 HP), empty load weight: 70,000 kg, drive type: Diesel, Full-container reach stacker Hnjdjzr Sp Sepfx Al Ter Load center: 1780 Transmission: Dana TE32418 Condition: Ready for operation and fully functional Technical condition: good Front tire size: 18.00-25 Front tire condition: 60 - 80% Rear tire size: 18.00-25 Rear tire condition: 40 - 60% EN: central greasing system, air-condition (automatic climate control) DE: central lubrication system, electronic air conditioning

Condition: good (used), Year of construction: 2012, Slow-speed machine with a push-floor system. Rotor width: 830 mm. Large rotor with 38 blades. Blade size: 40 x 40 mm. 22 kW motor. Screen aperture: 25 mm. Hsdpfx Ajy T Ef Eol Tjnr

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 18,155 h, load capacity: 45,000 kg, lifting height: 14,565 mm, fuel type: diesel, power: 243 kW (330.39 HP), empty load weight: 65,600 kg, drive type: Diesel, construction width: 4,150 mm, Full-container reach stacker Transmission: Clark 4-speed automatic Condition: Ready for operation and fully functional Technical condition: Good Front tyre size: 18.00-25 Rear tyre size: 18.00-25 Piggy-back, hydraulic pile slope on spreader, hydraulic sliding cabin Hodozr Sp Eopfx Al Tonr

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 13,970 h, load capacity: 46,000 kg, lifting height: 16,100 mm, fuel type: diesel, power: 257 kW (349.42 HP), empty load weight: 74,500 kg, drive type: Diesel, construction width: 4,185 mm, Full-container Reach Stacker Load center: 1780 Hnodpszr Spxefx Al Tsr Transmission: Dana TE32000 Condition: Ready for operation and fully functional Technical condition: very good Front tire size: 18.00-25 Rear tire size: 18.00-25 EN: Hydraulically sliding cabin, central lubrication system for chassis, boom + spreader, rear-view camera, air conditioning (automatic climate control), automatic spreader adjustment 20‘-40‘ DE: 2x central lubrication for chassis, boom and spreader, hydraulically sliding operator cabin with electronic air conditioning, automatic spreader adjustment 20-40, reversing camera

Condition: excellent (used), Catalogue number 7361 TECHNICAL DATA - Feed opening width: 400mm Hnedpfoztq N Tsx Al Tsr - Feed opening height: 180mm - Shaft width: 430mm - Shaft diameter: 430mm - Knife length: 430mm - Number of knives: 2 pcs - Sieve dimensions: 60x60mm - 2 lower feed toothed rollers - Motor for lower rollers: 1.8kW - 2 upper feed toothed rollers - Motor for upper rollers: 1.8kW - Belt feeder - Feeder belt length: 2200mm - Feeder belt width: 330mm - Main motor: 22kW - Autoreverse - Reverse function - Overall dimensions (L/W/H): 4100x1350x1100mm - Weight: 1800kg ADVANTAGES – German production – Autoreverse (adjustable) – Reverse function – Used shredder, very good condition Net price: 66,900 PLN Net price: 15,920 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8013 TECHNICAL DATA - inlet width 450mm - inlet height 210mm - shaft width 450mm - shaft diameter 550mm - number of knives 2 pcs - traction shaft, toothed, top and bottom 2 × 2.2kW - additionally, a toothed traction roller at the bottom, in front of the traction shaft - electric auto-reverse (with adjustable settings) - reverse gear - belt conveyor - conveyor length 2260mm - conveyor belt width 430mm - main motor 45kW - overall dimensions of the conveyor (length/width/height) 4900x1700x1700mm - weight approximately 3000kg ADVANTAGES – with belt conveyor – electric auto-reverse Hnedpfjzrugaex Al Ter – reverse gear – used shredder, very good condition Net price: 76900 PLN Net price: 18310 EUR, depending on an exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK40 - Spindle power : 32,5 [kW] - Spindle speeds : 40.000 [rpm] - Number of spindle hours : 1.211 [h] LINEAR AXES - Travels on X/Y/Z axes : 420 / 320 / 320 [mm] - Cutting feed rates (X/Y/Z) : 60.000 [mm/min] A ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0,001 [°] - Cutting feed rate : 200 [rpm] B ROTARY AXIS - Travel : 100 [°] (+/-) - Indexing precision : 0,001 [°] - Cutting feed rate : 200 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 - Tool exchange time : 5 [sec] TABLE - Table dimensions : Ø 250 [mm] - Maximum weight upon table : 20 [kg] - Distance table / spindle nose (min./max.) : 40 / 360 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 35 [kW] WEIGHT & DIMENSIONS Hjdeuhbuujpfx Al Tsnr - Machine floor space : 2.050 x 2.555 [mm] - Machine height : 2.520 [mm] - Machine weight : 5.000 [kg] MACHINE HOURS - Number of hours under power : 4873 [h] EQUIPMENT - CNC : Heidenhain iTNC530 - Electronic handwheel - Linear scales - 3 colors status lamp - Coolant tank * With washing gun - Chips conveyor - Oil mist extractor : FILTERMIST FX5002 - Spindle cooling unit - Electrical cabinet air conditioning - Tool probe : Renishaw - Workpiece probe : Renishaw - Tool-holders : 60 - Tool preparation bench

Condition: good (used), Year of construction: 1996, Single-shaft shredder with push floor Rotor width: 820 mm Rotor diameter: 368 mm, with 40 blades 18.5 kW motor Screen size: 20 mm Hnjdozrlu Uspfx Al Tsr In fully functional condition, ready for immediate use.

Condition: used, Year of construction: 2003, operating hours: 20,500 h, load capacity: 45,000 kg, lifting height: 16,000 mm, fuel type: diesel, construction height: 4,800 mm, gearing type: automatic, Equipment: cabin, head guard, 2 units available; location is between Munich and Nuremberg. Inspection and collection possible near Munich. All inspections have been carried out, good condition. Volvo engine 174 kW. Viewing by appointment only. F 365 Ferrari Hnedpszfylhofx Al Tsr Front width: 4250 mm Rear: 3360 mm Chassis length: 8600 mm Overall height: 4700 mm Chassis height: 3660 mm (A-frame) Weight: 65600 kg, 9500 kg spreader, 8500 kg mast Chassis weight: 47600 kg Transport dimensions/weight

Condition: used, Year of construction: 1996, operating hours: 20,700 h, load capacity: 41,000 kg, lifting height: 15,000 mm, fuel type: diesel, construction height: 4,800 mm, gearing type: automatic, Equipment: cabin, head guard, 2 units available. Location is between Munich and Nuremberg. Inspection and pick-up by appointment in the Munich area. All inspections have been carried out. Good condition. Hsdpfx Alszfykqo Tsnr New Mercedes engine, 222 kW, 302 hp, 302 engine hours, 1150 total hours. Viewing by appointment only. F 198 Ferrari Width front: 4250 mm Rear: 3360 mm Chassis length: 8800 mm Overall height: 4570 mm Chassis height: 3350 mm A? Bock Total weight: 66,800 kg - 9500 kg spreader? 8500 mast

Condition: excellent (used), Wood chipper Mario Ferrari L4T2N 400x120 - Italian production - year of production 1992 TECHNICAL PARAMETERS: - inlet width 400 mm - inlet height 120 mm - engine power 45 kW - autoreverse - upper pulling toothed shaft - two lower pulling toothed shafts - conveyor belt 2500 mm - two knives - rotor diameter 400 mm - rotor width 400 mm - power of feed motors 2 x 1.1 kW Transport dimensions Hedpfx Aslwqgajl Tsnr 250x170x150 cm weight ~ 1500 kg

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 13,530 h, load capacity: 46,000 kg, lifting height: 16,200 mm, fuel type: diesel, construction height: 4,900 mm, power: 257 kW (349.42 HP), empty load weight: 83,700 kg, total length: 12,000 mm, drive type: Diesel, construction width: 4,185 mm, Full container reachstacker Load center: 1780 Transmission: Dana TE32FF Condition: Ready for use and fully functional Hnjdpfx Aleznpgao Tsr Technical condition: very good Front tires type: Pneumatic Front tires size: 18.00-33 Rear tires Type: Air Rear tires Size: 18.00-33 EN: hydraulic support jacks for increase of capacity hydraulically sliding cabin central greasing system for chassis, boom + spreader rear view camera air-condition (automatic climate control) automatic spreader adjustment 20'-40' DE: hydraulic support for higher load capacity with larger outreach 2x central greasing for chassis, boom and spreader hydraulically sliding cabin with electronic air-condition automatic spreader adjustment 20-40 rear view camera

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 1,050 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 420 mm, spindle speed (max.): 18,000 rpm, number of axes: 4, This 4-axis C.B. Ferrari B16 was manufactured in 1998. It features an X-axis travel of 1,050 mm, Y-axis travel of 420 mm, and Z-axis travel of 420 mm. The machine is equipped with an electrospindle capable of reaching a spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the C.B. Ferrari B16 vertical machining centre we have for sale. Contact us for further details. • 4-axis continuous machining center with tilting head • Spindle type: Electrospindle • Collet holders, various: 45 units • Tapping holders: 3 units • Milling holders: 6 units • Weldon holders, various: 15 units • Vices: 2 units Hjdpfx Aljzk Dxps Tonr