Panel sizing circular saws

PANHANS 690

Condition: used, Year of construction: 1994, with Supergehrfixangle mitre fenceused, good conditionmake Panhanstype 690year of construction 1994machineNo. 1286GS wood dust testedmotor 5.5 kWsteel guidescarriage length approx. 3200 mmcutting width approx. 1250 mmswivel up to 45°scoring unitparallelogram protectiontable top extensionhydraulic height adjustmenthydraulic swivel adjustmentdigital display:- cutting angleangle stop as mitre fence with length compensation / super mitre fixsuction connection D 120/80 mmspace requirement approx. 3200 mm x 3700 mm x 1700 mmWeight approx. 1000 kgTotal connected load approx. kWStorage location 97447 Gerolzhofen, free loadingHandover as is, as inspectedwithout guarantee and warranty Ksdpfxovxr Nps Aa Eofa

Year of construction: 2024, condition: new, The robust manual length stop MD 100 m enables you to efficiently increase the productivity and quality of your production. The operator can move the carriage to the desired position quickly and accurately. The specially developed clamping system gives the carriage a very high holding power. The length is measured using an easy-to-read tape measure with mm graduation. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • suitable for striking steel profiles and solid materials • Trolley with 3 ball bearings • smooth-running for quick and precise length positioning • Manual stop clamping via large adjustable hand knob • specially developed clamping system with very high holding power • raise and lower manual arm • Measuring rail with measuring tape and reading beacon (resolution 0.10 mm) • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.3 m • Left or right hand versions available • Mounting screws • Accesories: -Stop arm with spring damping Ksdpfx Asidlpioa Ejfa -manual arm retraction via hand lever -Arm retraction with impact damping via pneumatic cylinder -various material roller conveyors

Condition: used, Year of construction: 2023, Used machine Year of manufacture 2023 Technical data: Sliding table length 3200 mm Cut length sliding table 3200 mm Cutting height at 90° max. 155 mm at 46° max. 105 mm Cutting width at rip fence 1250 mm Length stop on cross slide extendable up to 3500 mm Kfjdpfx Aow Nacvea Esa Saw blade diameter max. 450 mm Saw blade diameter (retractable under table) ø 400 mm Table size cast iron table top 1200 x 655 mm Table extension plus 750 x 655 mm Table widening 1430 x 940 mm Table height / working height +/- 20 mm 900 mm Motor power 5.5 kW / 7.5 HP Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Voltage 400 V / 50 Hz Space requirement 7000 x 3500 mm Weight approx. 1150 kg Options: Motor 7.5 kW Tele-Digit length stop With central digital wireless display 0.1 mm in the low-power system for both stop flaps up to 3000 mm instead of the standard length stop Double-sided miter stop DSG A For angle cuts 0° – 90° on the aluminum double sliding table, length and angle measurement adjustable via scale; for cross cutting up to 1375 mm with length compensation for preferred angles 5°, 10°, 15°, 22.5°, 30°, 45°, 60°, 67.5°, incl. splitter wood, wall holder and an additional factor scale for easy calculation of incorrect miters for different workpiece widths Swivel device for the cross slide Quick ergonomic pushing into the park position 2 clamping clamps for sliding table Current list price: 46254.- Availability: short-term Storage location: Flörsheim

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, For sale: A precise sliding table saw from Panhans Manufacturer: Panhans Model: 690 Serial number: 519 Year of manufacture: 1989 Weight: approx. 1100 kg Operating hours: — Space requirement: approx. 7000 × 3500 mm Motor power: 7.5 kW Voltage: 380 V / 50 Hz Operating current: 12.9 A Sliding table length: 2600 mm Table height: 900 mm (± 20 mm) Saw blade diameter: max. 450 mm Speeds: 3000 / 4000 / 5000 / 6000 rpm Kodowttq Aspfx Aa Ejfa Cutting height: max. 155 mm at 90°, 105 mm at 46° Saw blade tilt: 0°–46° Height and tilt adjustment: Mechanical Scoring unit: No Extraction capacity: approx. 1450 m³/h at 20 m/s

Condition: good (used), Year of construction: 2003, functionality: fully functional, Length of sliding table: 3,000 mm Cutting width at rip fence: 1,000 mm Cutting height with blade diameter 450 mm: 75 - 150 mm Cutting height with blade diameter 350 mm: max. 100 mm (each at 90-degree blade position) Double carriage on steel round guides, no Pertinax Reinforced main saw motor: 7.5 kW Maximum saw blade diameter: 450 mm Height adjustment of the saw unit via dimension input on the control panel Motorized tilt adjustment of the saw unit via dimension input on the control panel Supplied with newly installed 350 mm saw blade 2-axis scoring saw unit, can be set in the control system to desired height and alignment relative to the main saw blade Scoring unit automatically lowers below table level when not in use Adjustment of the scorer can be done while the machine is running RAPIDO scoring saw blade – simplifies scoring width adjustment, set up in max. 3 minutes Adjustment range: 2.8 – 3.8 mm Additional accessories: - Mitre fence extendable to 3,200 mm, with 2 foldable stops - LASER cutting line indicator, e.g. for trimming cuts on solid wood planks Kfsdpox Dax Ejfx Aa Eoa

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 6028, cutting width (max.): 1,200 mm, saw blade diameter: 4,000 mm, table length: 3,200 mm, height adjustment type: hydraulic, trimming length: 2,000 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 6,000 rpm, input voltage: 400 V, length stop: 3,200 mm, Machine no: 6028 Types: 690 B 3000,4000,5000,6000 rpm Kfjdpfx Asvl Icrea Eea Power: 3/400V/50Hz Motor: 5.5 Kw Table 2000X400 mm

Condition: new, saw blade diameter 315/350 mm capacity 90 degrees: round 125 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 160x90 mm capacity 45 degrees: round 105 mm capacity 45 degrees: square 90 mm capacity 60 degrees: flat 80x100 mm total power requirement 1,8/2,5 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,6 x 1,22 x 1,06 m The large workshop saw with sophisticated technology. (20070) • For miter cuts right and left up to 45°, end stop at 90° and at 45° left • For sawing steel, stainless steel, and, to a limited extent, aluminum profiles • Vice with quick-release lever, longitudinally adjustable clamping jaw, adjustable guide, and double clamping arm for burr-free cuts • Conical safety clutch made of hardened steel to protect the saw blades. Ksdpfod Iin Tsx Aa Eefa • Large base plate made of solid cast iron for maximum stability and low-vibration sawing • 2 speeds: 30 + 60 rpm • Powerful special gear with elastic clutch for heavy-duty use • Automatic cooling directly on the saw blade • Saw head with double bearings • 24 V safety switch in the handle with restart lock • Length stop, assembly tool ATTENTION: Price does not include saw blade!!!

Condition: reconditioned (used), functionality: fully functional, Year of manufacture 1997, connected load 380V 5.2A 2.0kW, saw blade diameter 350 mm, can be swiveled 45° on both sides, height adjustable with hand crank, cutting length 600 mm, extraction connection 100 mm, table height 890 mm, roller conveyor on the right with stop cutting length 3200 mm, roller conveyor on the left with stop cutting length 2200 mm Kodpfxswhn T Uj Aa Eefa

Condition: ready for operation (used), functionality: fully functional, Equipment: documentation/manual, SECOND-HAND RECONDITIONED 5 AXIS ROBOT CMA MOD. ROBY 5EX-R Kjdot U Ngaspfx Aa Esfa - N. 5 controlled axis - N. 3 supports - Wrist capacity 3 kg Carrousel - N. 3 supports - Arm capacity 25 kg. - With manual and CE certificate RETROFIT 2024

Condition: used, Year of construction: 1993, machine/vehicle number: 4610.17, - Manufacturer Bürkle - Type DAL 1-1300 R - Year of manufacture approx. 1990 - 1993 - Working width 1300 mm - Machine is being overhauled, then in very good condition - Working height 870 mm - Part height 3 - 80 mm - Operating side right - Paint application roller 50 Shore - Dosing roller hard chrome-plated approx. 174 mm - Counter-pressure cylinder rubberized - Belt transport - Length 1050 mm - Feed adjustable via handwheel 6 - 30 m/min Kjdpfx Ajumvkvja Esfa - Total connection approx. 2 kW - Weight 3250 kg - With control cabinet - Volt, Hz 400 / 50 - Machine number 4610.17 - Product number 8479 8997 - Voltage fluctuations max. +/- 5 %