Electrical Injection Moulding Machine

FANUC ROBOSHOT S-2000 i 150B

Condition: excellent (used), Surface of the base plate 880 x 700 mm Distance from spindle center to stand min./max. 220 / 620 mm Drill spindle: 13 mm passage Inner cone MK 3 Stroke 150 mm Spindle speeds 25 - 2560 rpm. Spindle feeds 0.06 - 0.12 - 0.25 mm/rev Bledpsuigzpsfx Alcjh Motor power (1500/3000 rpm) 1.2 / 1.5 HP

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right Bljdpefg Rlcefx Alceh steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

Condition: excellent (used), Year of construction: 2019, operating hours: 19,200 h, functionality: fully functional, machine/vehicle number: 90514 2019, saw blade diameter: 710 mm, tooth pitch: 55 mm, grinding wheel diameter: 200 mm, total width: 2,662 mm, total length: 2,540 mm, total height: 2,640 mm, type of input current: AC, input current: 10 A, input frequency: 50 Hz, disc diameter: 200 mm, grinding wheel bore: 32 mm, grinding spindle motor power: 3,000 W, saw blade width: 8 mm, input voltage: 400 V, overall weight: 3,200 kg, saw blade bore: 80 mm, power: 10 kW (13.60 HP), grinding diameter: 710 mm, workpiece diameter (max.): 710 mm, Equipment: rotational speed infinitely variable, CNC saw blade sharpening machine with chip divider grinding device and saw blade magazine up to D=560mm for unmanned operation. In manual mode: 40-710mm. Saw blade magazine with 3 mounting arbors. Oil filtration system suitable for HSS and carbide (HM), oil cooler brand Polar 2.9. Tooth profiles for HSS: Form A, B, BW, C, and special profiles. TK saw blades can be ground in diameters from 200-500mm. The fire extinguishing system is an oil retrofit kit with aerosol extinguishing generator. Equipped with electrostatic air extraction. Bodpfx Aoxuq I Ejlcjlh

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode Bsdpfx Aljfx Hv Hecslh selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: excellent (used), 2 - Used Urban AKS 4110 head welding machine - Heated stainless steel blades on top - Heated stainless steel blades on bottom Bljdsykp Dxjpfx Alcjh - Weld seam limitation: 0.2 mm - Maximum welding length: 3.25 m - Set of support arms

Condition: ready for operation (used), Used Machine Injection Moulding Machine Manufacturer: Krauss Maffei KM 80 C1 Year of manufacture: 2000 Only 1 machine left in stock No delivery time, immediately available Inspection possible by appointment The machine is no longer powered / No coolant connection The machine is professionally stored Technical Data: Clamping force (kN): 800 kN Platen size (mm): 610×610 Tie bar spacing (mm): Daylight opening (mm): 250 Max. (mould) open daylight (mm): 750 Control unit: MC4 Screen text language: German (cannot be changed to other languages) Injection unit: Screw diameter (mm): 45 Bodpfx Aju Ti Srelcolh Injection pressure (bar): 1878 Shot volume (cm³): 275 Pump drive power (kW): 18.5 Heating capacity (kW): 13 Oil tank capacity (l): 270 Dimensions (m): 4.3 x 1.4 x 2.1 Total weight: 3.2 t Further photos available on request.

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min Bledpol Tuvdefx Alceh -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Condition: like new (used), Year of construction: 2017, operating hours: 16,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Hersteller: ARBURG Typ: 720A3200-800/70 Baujahr: 2017 Schließkraft: 320 Tonnen Holmabstand 720 x 720 mm Einbauhöhe min. /max.: 300 - 800 mm Öffnungsweg: 600 mm Schnecken DN 1: 50 mm Bljdpfx Ajv S E Dgolceh Max. Hubvolumen: 392 cm³ Spritzteilgewicht in PS: 359 g Schnecke DN 2: 22 mm Max. Hubvolumen: 34 cm³ Spritzteilgewicht in PS: 31 g Steuerung: Selogica Technische Ausstattung anfordern.

Condition: like new (used), Year of construction: 2015, operating hours: 47,247 h, functionality: fully functional, machine/vehicle number: 230999, clamping force: 500 kN, screw diameter: 35 mm, displacement volume: 115 cm³, injection weight: 105 g, Equipment: documentation/manual, Here, as a dealer of injection molding machines, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines manufactured from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Arburg Type: 320C 500-170 Serial number: 203130 Bsdpfsv U Tl Djx Alcjlh Year of manufacture: 2015 Operating hours: 47,247 h Control system: Selogica Dimensions L/W/H: 3.12 x 1.43 x 1.99 Weight: 2300 kg Functionality: fully operational Condition: very well maintained Extras: 1x core pull Handling interface Thermoplastic screw/cylinder 35 mm, highly wear-resistant - Complete documentation and software (on CF card) - German language - From first owner - origin Germany - Continuous maintenance by the manufacturer and previous owner Visible peripheral devices are not part of the offer - only if they are explicitly mentioned. Injection unit: Screw diameter: 35 mm Injection weight: 105 g/PS Injection pressure: 1,470 bar Injection volume: 115 ccm Clamping unit: Clamping force: 50 tons / 500 kN Tie bar distance: 320 x 320 mm Platen size: 446 x 446 mm Tool installation height: 200 mm Max. distance between platens: 550 mm Ejection stroke/force: 125 mm / 30 kN Clamping unit: hydraulic Motor power: 11 kW Heating power: 9.4 kW Total power: 21 kW The machine is immediately available in our warehouse in Hanover/Germany and has been tested. ✔ Warranty Warranty until the first commissioning Loading/shipping Free loading onto the buyer's truck or free delivery to the buyer's location against reimbursement of freight costs - worldwide delivery possible Immediately available in our warehouse in Hanover/Germany For information about the machines we offer and our company: - We only sell machines that we have purchased from current production and which are stored in our Hanover warehouse. - All offered machines are inspected and tested before removal. - We do not sell insolvency goods - we are not a broker dealing with third-party property. - All offered machines come from successful companies for which maintenance and care are a matter of course. - All offered machines can be viewed in our warehouse and are powered on.

Condition: new, welding current max. 300 A open-circuit voltage 55 - 76 V Bjdpfsu Aw Shox Alcjlh connected load frequency 400 V weight 75 kg Dimensions (LxWxH) 950 x 560 x 880 mm Inert gas welding machine: - with pulse function - 300 amps - 400 volts - hose package 3m. - ground cable - Wire feed rolls for 0.8 - 0.9 - 1.0 - 1.2 - 2.5 - 3.2 - 4.0 and 5.0mm