Vertical machining center

FANUC Robodrill 14

Condition: used, FANUC ROBODRILL ALPHA T14i B is a Vertical machining center engineered for high precision, strong accuracy and reliability. Table 550×380 mm; travels X500 Y400 Z330 mm; vertical distance 150–450 mm. Spindle 100–12,000 t/min (stepless), feed 1–15,000 mm/min, rapid 48 m/min; spindle motor 5.5 kW; 3×400 V; total power 9 kVA; weight ≈2100 kg; size 1600×2000×2200 mm. Tool magazine 14 stations; 4th-axis divider Peiseler; oil-mist extractor Elbaron. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Nkedoyxnyispfx Agwsw

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 389 mm, turning length: 485 mm, turning diameter: 678 mm, spindle bore: 86 mm, spindle speed (max.): 3,500 rpm, feed length X-axis: 236 mm, feed length Z-axis: 495 mm, chuck outer diameter: 254 mm, controller model: Mori Seiki MSG-501, Twin Spindle Lathe with Mori Seiki MSG-501 Control, Live Tooling. 12 Station ATC, Nsdpoyguzzofx Agwjkw 3 Jaw Chuck 250mm, CHip Conveyor, 170mm 3 Jaw Chuck

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 300 mm, controller manufacturer: Fanuc 16i-M, controller model: 16i-M, table width: 390 mm, table length: 850 mm, rotational speed (min.): 80 rpm, rotational speed (max.): 8,000 rpm, spindle speed (min.): 80 rpm, spindle speed (max.): 8,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 300 mm Nodoyw Inqepfx Agwekw Table size: 850 × 390 mm Controller: Fanuc 16i-M Spindle taper: BT30 Spindle speeds: 80 - 8000 rpm Tool changing time: 1.0 sec. ATC: 14 pockets Including: 3x machinevices 36 Toolholders Oilfilter Filtermist S800 Machine manuals Country of origin: Japan Motor power: 3.7 kW Machine (L×W×H): 160 × 190 × 220 cm Machine weight: 1900 kg

Condition: ready for operation (used), Year of construction: 2020, operating hours: 1,284 h, overall weight: 2,200 kg, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis FANUC ROBODRILL α-D14MiB5 was manufactured in 2020. It features a spindle speed of 10,000 rpm and a 100 mm column extension. The machine includes a rotary table DDR260iB and a Renishaw OMP40 3D spindle probe for enhanced precision. If you are looking to get high-quality machining capabilities, consider the FANUC ROBODRILL α-D14MiB5 vertical machining centre we have for sale. Contact us for further details. • Big Plus spindle interface • 100 mm column extension • Machine roof • Electrical requirements: 3-phase, 10 kVA, 200–220 V AC, 50/60 Hz, SCCR 2.5 kA Additional equipment • Rotary table FANUC DDR260iB with face plate • Special setup: DDR 4th axis horizontal • Lang Quick-Point round plate 96 adapted for FANUC DDR/DTT • Renishaw OMP40 3D spindle probe with OMI-2T receiver • Häberle coolant tank HK250 (250 l capacity) • External coolant pump 220 l/min with flow monitoring • Manual band filter Nksdpfx Ajylw Hdogwow • Chip tray with perforated plate • Commissioning of Häberle machine and coolant system included

Condition: refurbished (used), Overhauled Mazak main spindle for VTC 200 or VTC 300 for sale. The spindle has been fully overhauled, spindle bearings and intermediate sleeves have been replaced. The taper has been reground. Subsequently, it has been balanced. The maximum speed is 12,000 rpm. We have additional overhauled Mazak spindles in stock; feel free to send us your inquiry. This is an exchange spindle, meaning a core return is required. If you have any further questions, we are at your disposal. Nedpfxsvdkdie Agwokw

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: FANUC, controller model: Series 16i-M, table load: 250 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 14, number of axes: 3, This 3-axis FANUC ROBODRILL α-T14iB was manufactured in 1997. It features an X-axis travel of 500 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine has a maximum spindle speed of 8,000 rpm and a tool changer capacity of 14 tools. If you are looking to get high-quality machining capabilities, consider the FANUC ROBODRILL α-T14iB vertical machining centre we have for sale. Contact us for further details. • Rapid feeds (X/Y/Z): up to 48 m/min • Installed power: 10 kVA • Supply: 200–220 V, 50/60 Hz, 3-phase Njdpfjyrq Uhjx Agwokw • Registered cutting time: 15,291 h Technical Specification Taper Size BT 30

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 300 mm, controller manufacturer: FANUC, controller model: Series 16i-M, table load: 250 kg, overall weight: 2,100 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 14, number of axes: 3, This 3-axis FANUC ROBODRILL α-T14iB was manufactured in 2000. It features an X-axis travel of 500 mm, Y-axis travel of 380 mm, and Z-axis travel of 300 mm. The machine has a maximum spindle speed of 8,000 rpm and a tool changer capacity of 14 tools. If you are looking to get high-quality machining capabilities, consider the FANUC ROBODRILL α-T14iB vertical machining centre we have for sale. Contact us for further details. • Rapid feeds (X/Y/Z): up to 48 m/min • Installed electrical power: 10 kVA • Supply voltage: 200–220 V, 50/60 Hz, three-phase • Registered cutting time: 8,235 h Nkjdpoyrrlnjfx Agwjw Technical Specification Taper Size BT 30

Condition: used, Year of construction: 1988, tail stock ja ja condition nicht geprüft Nkjdpfju Su I Eox Agwew weight of the machine ca. 3,8 t

Condition: ready for operation (used), Year of construction: 2004, operating hours: 23,500 h, controller manufacturer: FANUC, controller model: Series 16i-MB, number of axes: 4, This 4-axis FANUC Robodrill Alpha-T14 iD was manufactured in 2004. It features a BT30 spindle taper, a 14-tool turret, and a table size of 750 x 380 mm. Equipped with a Fanuc series 16i-MB control system and a 4th axis by Yukiwa. Running time stands at 23,500 hours. If you are looking to get high-quality milling capabilities consider the FANUC Robodrill Alpha-T14 iD machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits • Machine in good condition, regularly maintained. Technical Machine Benefits Nkedpfxox D Rxie Agwow • 4th axis: yukiwa • Table size: 750 x 380 mm • Spindle power 11 kW (1min rating) / 3.7 kW (continous) Extra Information Machine still under power

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Fanuc Robodrill T14iA Vertical Machining Centre for sale. 1998 model with 8,000 rpm spindle and 14 tool ATC. SPECIFICATION Traverses X Axis 500mm Y Axis 380mm Z Axis 300mm Spindle Nose to Worktable Minimum 250mm Maximum 550mm Work Table Table working surface 650 x 400mm Table loading capacity (uniform load) 200kg Table surface configuration Number of T slots 3 Width 14mm Pitch 125mm Machine Dimensions Width 1550mm Depth 1900mm Nedpfx Agonq Dgujwekw Height (min/max) 2067 / 2367mm Weight (approximately) 2100kg Spindle Speed range 100 – 8,000rpm Taper BT30 Feedrates Rapid traverse rate 48m/min Feedrate 1 – 30,000mm/min Toolchanger ( MAS BT30 Tools) Tool storage capacity 14 tools Tool change time – cut to cut 0.9 secs (2kg) Tool Diameter 80mm Tool Length 200mm Tool Weight 2Kg Coolant tank capacity 100 litres CNC Control System Fanuc Series 16iM Electrical Supply 415V, 3 ph , 50Hz Compressed Air Supply 5kgf/cm2 (100 litres/min) MACHINE EQUIPPED WITH:- Coolant system Lighting Enclosed guarding

Condition: ready for operation (used), Year of construction: 1989, This MORI SEIKI SL 25 was manufactured in 1989. It is a horizontal turning machine equipped with a three-jaw chuck, dead-collet head, chip conveyor, and tailstock. Clamping wedges for tools are also included. Consider the opportunity to buy this MORI SEIKI SL 25 horizontal turning machine. Contact us for more information. Nedpfx Aex D R Rrjgwjkw • Tailstock Additional equipment • Three-jaw chuck and dead-collet head 185e • Chip conveyor • Clamping wedges for tools

Condition: used, Year of construction: 2008, FANUC - ROBODRILL A-T14iFL - 2008 - system FANUC EL A5 Nkedpfxoymtavs Agwow - spindle 10000 RPM - X/Y/Z=700/400/330 mm - rapid move 54 m/min - head 14 pos. - max table load 300 kg - taper BT30 - most probably also including tools holders in the two yellow boxes, without tools - weight 2100 kg - run time 12700+ hours

Condition: like new (used), Year of construction: 2000, operating hours: 7,600 h, functionality: fully functional, *FANUC ROBODRILL T14-iBL DRILL TAP VMC (4 Axis)* Category: Vertical Machining Centers (VMC) Reference No.: 311119 Capacity: 700 X 400 X 330 MM Year of Construction: 2000 Technical Specification: SPINDLE Spindle Taper : BT 30 Spindle Speeds : 8000 RPM Spindle Motor : 3.7 / 5.8 kW WORKING CAPACITY Travels (XYZ) : 700 X 400 X 330 MM Guideways : LM ATC Tool Change Capacity : 14 Tools CNC Control : Fanuc 16iM Additional Details: With Nikken 170 4th Axis Nkjdpfx Aex Ehi Iegwjw

Condition: excellent (used), Year of construction: 2007, Okuma MB-46VAE Machining Center Year of manufacture: 2007 Control: OKUMA OSP P200-M Table size: 1000 x 460 mm X travel: 762 mm Y travel: 460 mm Z travel: 460 mm Table load capacity: 700 kg Spindle cooler Taper: MAS BT40 Magazine with 42 tool stations Nkodpfx Agjxwtp Dewew Weight: 6500 kg Dimensions LxWxH = 2750 x 2160 x 2715 mm

Condition: used, Year of construction: 2001, FANUC ROBO DRILL T14 iC COMPACT MACHINING CENTER Nedpfx Aeydvp Uegwskw 14 Tool tool changer 5 off BT30 tools