WIG and electric DC inverter welding machine with HF ignition, WIG welding machine, inverter welding

ESAB Aristotig 160 / LTN 160

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler. Rcedot Awm Djpfx Akieh

Condition: new, Year of construction: 2012, welding current 20 - 100 A cutting capacity max. 35mm mm open-circuit voltage 250 V Required air-pressure min. 4 bar connected load 20 KVA connected load frequency 400 V weight 0,7 kg Dimensions (LxWxH) 1,0 x 0,6 x 0,8 mm Plasma cutting machine with cart - Includes 7m hose package - Spare nozzles Rodpfx Akow En E Esiech

Condition: new, welding current max. 250 A open-circuit voltage max. 66 Volt Rjdpey Aa Itjfx Akisch connected load frequency 400 V weight 65 kg Dimensions (LxWxH) 900 x 500 x 750 mm MIG/MAG gas-shielded welding machine: incl. 3m hose package.

Condition: good (used), Year of construction: 1997, machine/vehicle number: 71-000988, Offer 24820 Technical data: Rcsdpfsvqbdyjx Akieh - Cutting current continuously adjustable 30 - 100 A - Duty cycle 80 A / 100% ED - 100 A / 80% ED - Max. cutting thickness - Steel approx. 32 mm - Aluminum approx. 25 mm - Stainless steel approx. 55 mm - Air connection 5 bar - Gas mixing system - Connection 400 V / max. 14.5 kVA - Space requirement approx. W 800 x H 1650 x D 700 mm - Weight approx. 250 kg

Year of construction: 1998, condition: good (used), functionality: fully functional, machine/vehicle number: 12254 B521 860, Overheadcrane ± 10.500 mm x 12.500 kg Rcodpov Ip Egjfx Akish

Condition: excellent (used), Year of construction: 2015, 1. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2015 (1 unit), 2013 (2 units available) 2. WEISHAUPT WM-G10/3-A, (with gas duct) Rcsdpfewgyrtox Akieh - Output: 125-900 kW - Design: ZM-LN - Year of manufacture: 2011 3. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2011 4. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2009

Condition: good (used), Year of construction: 2014, Cutting range examples: at 90° 260mm round 300x260mm rectangle at 45° left or right 200mm round 180x180mm rectangle at 30° left or right 130mm round 120x120mm rectangle Quick miter adjustment from 30° to 150° in stepless increments of 0.5° as indicated on the scale. The miter pivot point is the intersection between the saw blade and the material support, thus preventing any change in the length dimension. End stops at 30° + 45° left and 30° + 45° right Manual material clamping. In every angle position of the saw frame, the material is clamped parallel at 90°. Cutting pressure is reduced by the self-weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section via a hydraulic damping cylinder. Rcodozrmk Rjpfx Akish MEBA Micro-Dosing System complete with spray head. Machine stand with chip collection tray. with the option of hydraulic lifting of the saw frame.

Condition: used, Plasma cutting machine MB - Welding Technology, Type Plasmaprof 50 Identical construction to CEBORA Machine no. 244311, year of manufacture approx. 1992 Output: 50 amps = 35% duty cycle 30 amps = 100% duty cycle Setting range: 2 levels Hose pack length: approx. 6 meters Compressed air connection: 4.7 bar Mains connection: 400 volts, 50 Hz, 32 amp plug Rcjdpfxedzqa Hs Akijh Space requirement L x W x H: 500 x 350 x 700 mm Weight: approx. 80 kg In good condition

Condition: new, functionality: fully functional, empty load weight: 285 kg, maximum load weight: 1,215 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,550 mm, loading space width: 1,330 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS MP 255 153 1500 2 NEW VEHICLE Internal dimensions: 255 cm x 153 cm Side wall height incl. railing: 43 cm Loading platform height: 52 cm Gross vehicle weight: 1,500 kg Payload: 1,215 kg Braked single-axle low-loader Overrun brake and handbrake by KNOTT 1,500 kg braked axle Low chassis Fully welded hot-dip galvanized steel frame Aluminum profile side walls Steel railing Rear tailgate foldable and removable 15 mm thick, non-slip and robust phenolic plywood floor Jockey wheel 6 lashing eyes with 400 kg tensile strength each 14" reinforced C-rated tires M+S tires Net/rope hooks on frame 13-pin connector Front marker lights Rear lights with reversing light, fog lamp (NSL), and triangular reflectors OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -100 km/h approval kit (shock absorbers) -Spare wheel with holder -Foldable and removable front wall -Integrated loading ramps, 2,000 kg capacity -SARIS alloy wheels -Full LED lighting -Anti-theft device -Net, fine or coarse mesh -H-frame -Mesh side panels in various heights, also closed -Flat cover with or without bows -High tarpaulin (150 cm or 180 cm) -Rear support legs Further accessories available on request! Plus shipping to Gera and vehicle registration documents: €150 net Rcsdpfxjrk Imle Akieh Pictures are for illustrative purposes only and may show optional, extra-cost accessories. Have you not found the right trailer yet? We have 50–100 vehicles in stock at all times for immediate pickup. Our workshop is open for all types of repairs from 8:00 AM to 5:00 PM on weekdays. Specialist in axle repairs, including for caravans. Large selection of rental trailers. Furthermore, we offer a wide range of spare parts and accessories for trailers from all manufacturers. Get advice over the phone, visit our website, or stop by directly.

Condition: good (used), Lathe WAFUM Type TUD 40 Centre distance: 1500 mm Swing over bed: Ø 440 mm Centre height over bed: 220 mm Centre height over carriage: Ø 125 mm Spindle bore: Ø 56 mm Spindle speed: 18 - 1800 rpm, 36 steps Tailstock taper: MK 5 Drive power: 4 and 6.7 kW - Spindle speed via 2 motor speeds and 18 gearbox stages - Guide ruler for turning slender cones with automatic longitudinal feed Space requirement (L x W x H): 3100 x 1200 x 1450 mm Rodpoyx Uv Dofx Akijch Weight: 3000 kg Good condition