UPC chuck ER-016841

EROWA UPC Spannfutter ER-016841

Condition: excellent (used), functionality: fully functional, We are offering a used EROWA UPC chuck here. ER-016841. The UPS chuck is in very good condition and fully functional. Viewing possible by appointment Gijdpfx Afsxqnqvonen Shipping and viewing possible!

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Giodpfxew T Sd Ts Afnjn Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: 3815407, WEIGHT 8000KG FEM ISO 1Am M4 KW 2.4/15.5 ( 50 Hz) MAXIMUM CAPACITY 16 TON Gsdpfxjt Nhqyj Afnoin

Condition: reconditioned (used), travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, rotational speed (max.): 6,000 rpm, tank capacity: 1,200 l, SHW Powerspeed 5 Travel paths • X-axis (bed): 10,000 mm • Y-axis (headstock): 1,300 mm • Z-axis (vertical): 2,100 mm Control • CNC control: Heidenhain iTNC 530 Feed rate • X, Y and Z axes: 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head in orthogonal design Gedpfov Dhw Tex Afnjin • Milling head holder swivel range: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 - 6,000 rpm Chip conveyor • Feed length: 10,000 mm Coolant system • Container capacity: 1,200 Liter ATTENTION the images are comparison images About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization _____ Used machine - used milling machine - used traveling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used milling machine - used CNC milling machine - used drilling and milling machine - used metal milling machine - used metal milling machine - used metal milling machine - used CNC milling machine - CNC milling machines - CNC milling machines - milling machine - large part machining - large part machining - large part machining - CNC large part machining - milling - shw - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Year of construction: 2023, condition: new, SONDA is an economic solution for gaining an ultrasonic cleaning unit. If you have your own stainless steel tank and want to convert this tank to a ultrasonic washing unit SONDA is the ideal match. We can produce SONDAs regardless of the dimension. What you should do is simply tell us your tank's dimensions and mount the unit to your tank with a simple operation. Operation Principle -Every single immersible SONDA units work with its own Gjdpfx Asd I E Ivsfnsin separate high frequency generator. -Immersible SONDA units are ready to fix on wall of tank. -Ideal for large tanks in coating and surface treatment. immersible transducer, ultrasonic cleaner, transducer, ultrasonic Please feel free to contact us for technical specifications.

Condition: new, Year of construction: 2025, functionality: fully functional, Dry Ice Cleaning Machine Model X-FORCE – Polish Manufacturer! This listing features a state-of-the-art X-FORCE dry ice cleaning machine, manufactured by the first Polish producer of such equipment. Our devices are sold worldwide and supported by an extensive service network. This is a professional, efficient, and reliable device designed for cleaning surfaces without the use of water or chemicals – the ideal solution for industry, workshops, maintenance, and restoration. Dry ice cleaning technology. Key advantages of the X-FORCE machine: • Polish manufacturing – quality assurance, robust construction, full service support, and spare parts availability. • High performance – effective cleaning with no surface damage. • Mobile and compact – easy to transport and operate. • Environmentally-friendly technology – dry ice cleaning without chemicals and no secondary waste. • Safe operation – 230V power supply, electric vibrator ensures stable ice feed. Technical Specification – X-FORCE: Parameter | Value Dimensions | 100 × 50 × 55 cm Weight | approx. 100 kg Dry ice hopper capacity | 37 kg Operating pressure | 1.7 – 20 bar Dry ice feed range | 0 – 3.5 kg/min Dry ice stream diameter | 1 1/4" Air consumption | 1.5 – 6.0 m³/min (5 bar) Power supply | 230V AC (50/60 Hz) Electric vibrator Applications: Godjxy Ilfopfx Afnjin • Cleaning of injection molds and dies • Cleaning and maintenance of industrial machines and equipment • Restoration of metal, wood, and stone surfaces • Removal of paints, greases, oils, and industrial contaminants • Cleaning electrical and electronic devices (no risk of flooding) • Post-fire cleanup Why choose X-FORCE: When you purchase a machine from the original Polish manufacturer, you not only receive a high-quality device, but also: • 24-month manufacturer’s warranty • Technical support and operator training • Access to accessories and spare parts • Warranty and post-warranty service on all continents! We are the only dry ice cleaning machine manufacturer offering a 24-month warranty. Brand new machine, ready for operation. Customisation of machine parameters and colour schemes available for larger orders.

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 20 rpm, table width: 850 mm, table length: 3,700 mm, overall weight: 18,500 kg, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Year of manufacture: 2007 Travel / Stroke Capacities: Longitudinal (X): 3,500 mm Vertical (Y): 1,250 mm Cross (Z): 1,000 mm Table dimensions: Length: 3,700 mm Width: 850 mm T-slots: 5 x 22 H12 Reference slot: 1 x 22 H8 T-slot spacing: 140 mm Paintwork: RAL 5011 (steel blue) RAL 7035 (light grey) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle 24 kW Spindle speed range: Spindle speed: 20-3,000 rpm Torque: 479 Nm Max. feed rate: X, Y, and Z axes 25,000 mm/min Mean acceleration: 2 m/s² Weight: approx. 18,500 kg Gisdoxgn Efepfx Afnen HEIDENHAIN iTNC 530 HSCI Swiveling control pendant including Heidenhain iTNC 530 control (1 processor / 4 axes) with software options 1 and 2. Automatic Milling Head, Diagonal H4 Automatic indexing Soraluce “Diagonal” milling head, Type H4 / 2 planes with 2.5° x 2.5° indexing, 479 Nm, tool clamping force 18,000 N. Automatic tool changer: Automatic tool changer (random carousel) with 20 magazine positions: The automatic tool change is carried out in the vertical position of the tool spindle. Maximum tool diameter: 125 mm Maximum tool length: 250 mm Maximum tool weight: 15 kg Number of magazine positions: 20 Chip conveyor package: Three chip conveyors, two longitudinal screw conveyors and one cross hinge belt conveyor with integrated coolant tank, discharge height: 1,000 mm Coolant System 2: Coolant/lubricant system 2 with discharge via shower ring and internal coolant supply according to DIN 69871 Form AD, tank capacity 500 l + 150 l lift tank with pump, delivery rate 50 l/min, delivery pressure 5/8 bar. Increased delivery pressure of high-pressure pump from 15 bar. RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are sourced by us following a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, all identified visible defects and faults are professionally repaired by our expert service team.

Condition: excellent (used), Year of construction: 2018, CNC controller: HEIDENHAIN TNC 640 Axes X-axis travel mm: 2.200 Y-axis travel mm: 2.200 Gisdpjw Rmpljfx Afnsn Z-axis travel mm: 1.610 A-axis degrees: +185° Worktable Number of pallets: 4 Table dimensions mm: ø1.800x1.400 Maximum workpiece size (D x H) mm: ø2.850x2000 Max. workpiece weight kg: 4.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 63/73 (100/40%ED) Spindle torque Nm: 300/348 (100/40%ED) Cooling Cooling through the Spindle Center bar: 80 (Form A) Tank capacity: 2.500 Tool system Tool holder: HSK-100A Tool magazine slots: 304

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, spindle speed (min.): 6,000 rpm, table width: 1,100 mm, table length: 4,200 mm, rotational speed (max.): 6,000 rpm, Heidenhain iTNC 530 control Tool changer for 60 tools Automatic universal head, 0.02 degree in both axes Gjdpfx Afow Ngd Tjnjin Machine will be refurbished in 2025

Condition: like new (used), Year of construction: 2017, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, workpiece height (max.): 510 mm, workpiece width (max.): 1,250 mm, workpiece length (max.): 975 mm, empty load weight: 4,200 kg, Equipment: cooling unit, Fanuc Robocut C800iB - Model Year 2017 Fanuc's largest wire EDM machine AWF Automatic Wire Threading Turkish Control Unit - Touchscreen Fanuc Link i Remote Control Water Cooler Core Joint Part Holding Twin Servo Wire Tension Control Thermal Compensation Fanuc New Series 15" Touchscreen and Turkish Control Unit Able to make 5 cuts with the standard new power supply and achieve a surface quality of 0.30 microns. New lower head design and lower head tube protected by bellows. Twin Servo wire tension control ensures consistently stable wire tension during cutting, resulting in more precise cuts. Advanced AWF2 system allows for wire threading at the point of breakage. Program transfer and remote control via CF card, USB, RS232C, and Ethernet Standard Features Maximum throughput workpiece clamping (mm): 1250 x 975 x 500 mm Maximum workpiece weight (kg): 3000 kg X-Y axis travel (mm): 800 x 600 mm Z axis travel (mm): 510 mm U-V axis travel (mm): 200 x 200 mm Maximum cutting angle (°/mm) std. Maximum cutting angle (°/mm) opt.: ±30° / 150 mm : ±45° / 70 mm Gijdjxfaqkopfx Afnjn Minimum axis travel (mm): 0.0001 Wire diameter (mm): Ø 0.1 ~ Ø 0.30 Maximum wire weight (kg): 16 kg Footage (mm): 2900 × 3260 mm Machine weight (KG): 4200 kg Control unit: FANUC