Injection molding machine

Engel Victory 2550/400 Tech Ecodrive

Condition: like new (used), Year of construction: 2017, Machine: ENGEL VICTORY 500T / 7050 (Year 2017) Year of manufacture: 2017 Control unit: CC300 Operating hours: 565 h Availability: Immediate Clamping Unit: Clamping force: 500 tons Opening stroke: 1100 mm Distance between tie bars: 1500 × 1285 mm Platen size: 1500 × 1285 mm Minimum mould height: 500 mm Maximum daylight (open distance): 1600 mm Injection Unit: Screw diameter: 120 mm Screw length (L/D): 22 D Injection volume: 5430 cm³ Maximum injection pressure: 1600 bar General Data: Motor power: 98 kW Heating power: 30 kW Clamping unit weight: 31 tons Injection unit weight: 15 tons Machine dimensions (L × W × H): 10.50 m × 2.30 m × 2.30 m Lrodpexvingefx Ad Eoh Options: Core pullers: 3 Robot interface: No Bi-metallic screw/barrel: Yes Other equipment: STAUBLI magnetic platens, 24 hot runner heating zones Note: The machine has very low operating hours (565 h) and belongs to the modern ENGEL Victory tie-bar-less series, ideal for large moulds and high-precision production.

Condition: excellent (used), Year of construction: 2008, Gravicolor 30 GC 30-M-O-Z Manufacturer: Motan Year of production: 2008 A gravimetric dosing and mixing unit designed for direct mounting on the inlet flange of a plastics processing machine. The device allows dosing and mixing of up to 4 granulated components. The actual, measured and weighed quantities are constantly compared with the set values using a modern microprocessor-based control system, which guarantees very high recipe accuracy (+/- 0.1%) thanks to continuous self-optimization. The complete unit includes: 2 feed tanks for primary material or regranulate/primary material 2 feed tanks for masterbatches or additives Lrodpjwm Ii Tofx Ad Ejh 2 pneumatically controlled conical dosing heads 2 precision dosing screws with motor drive Material tanks – capacity approx. 7 litres Weighing tank – capacity approx. 0.8 litres Mixing tank – capacity approx. 3.0 litres Manually operated gate valve GRAVInet controller with colour touch panel for recipe, milled material and process data management, vibration compensation and continuous self-optimisation; built-in Ethernet port and standard reporting/printing functions Technical data: Average capacity: 60 kg/h Main component dosing range: 1–100% Additive dosing range: 0.5–10% Power supply: 1/N/PE 230 V 50 Hz Power consumption: 100 W Compressed air: 6–8 bar, without oil and water Weight: approx. 60 kg ✅ The set includes Piovan material feeders - visible in the photos.

Condition: used, Year of construction: 2019, Year: 2017 Control type: CC300 Number of hours: 20,000H Storage location: MECA PLASTIC Deadline: AVAILABLE Closing force: 160 T Opening stroke: 460 mm Between columns: 520 mm x 520 mm Plate dimensions: 760 mm x 760 mm Minimum/maximum mold: 250/600 mm Maximum spacing between plates: 1060 mm Screw diameter: 35 mm Screw length: 20T cm3: 154 Ljdjv I Uw Ispfx Ad Esrh Bars: 2000 Motor power: 21 kW Heating power: 9.2 kW Closing weight: 8.4 T Length dimensions: 5.90 m Width dimensions: 1.70 m Height dimensions: 2.20 m Cores: NO Robot interface: YES Bi-metal: YES

Condition: excellent (used), Year of construction: 2011, operating hours: 103 h, functionality: fully functional, machine/vehicle number: C2250D5 / QSK60-G4, power: 2,000 kW (2,719.24 HP), fuel type: diesel, nominal power: 1,800 kW (2,447.32 HP), rotational speed (min.): 1,500 rpm, overall weight: 15,500 kg, type of cooling: air, color: grey, output voltage: 400 V, nominal power (apparent): 2,250 kVA, output frequency: 50 Hz, type of output current: three-phase, motor manufacturer: Stamford / CUMMINS, DUAL SWITCHING 50/60HZ 4 X CUMMINS Serial number 33184290 (QSK60-G4) 2,250 kVA ✔️ engine Cummins QSK60-G9 ✔️ alternator Stamford HCI 734F ✔️ year of manufacture 2010 Runtime hours 100> 75-91 hrs * engine Cummins QSK60-G9 Contact - Joshua Alexander -Iron Flag Global Limited The Demo project is over so we can now sell then Assets!!! Iron Flag Power Systems (US) / Iron Flag Global LIMITED (UK) is offering of four high-performance Cummins QSK60 G9 diesel generators, professionally removed from a decommissioned data centre environment. for 18 years We have specialized in only full data centre decommissioning, asset recovery, and controlled removals—so equipment is handled methodically, powered down correctly, documented, and preserved for resale. The result: exceptionally stable, low-hour machines with known provenance. These units are ideally suited for data centres, hospitals, industrial plants, utilities, and other mission-critical applications where reliability is non-negotiable. Custom enclosures with all the bells and whistles! Lower than 100hrs per generators. Generator ratings (each): THERE ARE FOUR UNITS IN TOTAL -PLUS TWO CUMMINS CONTROL SYSTEM AND ADDITIONALS INCLUDED,. - Standby: 2,250 kva Total package capacity: - 2250 kVA standby - 2000 kVA prime 4 UNITS AVAILABLE. Key specifications: - Engine: Cummins QSK60-G9 - Alternator: Stamford HCI 734F - Voltage / Frequency: 400 V | 50 Hz 60hz - DUAL VOLTAGE ALTERNATOR - Year of manufacture: 2010 - Running hours: ~75 hours - Tier IIII - Condition: Excellent – load-bank tested, fully operational, complete documentation Included with the package: - PowerCommand 3201 + Digital Master Control (full synchronisation & paralleling) - Radiators, exhaust systems, silencers Lsdpfox R Szuex Ad Eorh - Fuel systems - Full technical documentation, manuals, and service history - Indoor installation history (no harsh environmental exposure) Availability: - Immediately available – United Kingdom - On-site inspection or video inspection available - Global shipping and logistics support can be arranged These generators are a strong fit for projects demanding absolute reliability, long-term stability, and predictable performance. Having been removed by Iron Flag as part of a controlled data centre decommissioning, they offer confidence you do not get with unknown or distressed assets. Contact Joshua Alexander Iron Flag Global Limited

Condition: defective spare-parts repository (used), Year of construction: 2013, functionality: not functional, overall weight: 290 kg, A Wittmann robot system (stand alone) of the type W832-0611 is for sale The device was used as a spare parts donor and is not ready for use, but can be made functional again. Technical data: Year of manufacture: 2013 Axes: 5 Lrodpfovyd Elex Ad Ejh X-travel: 900 Y-travel: 1600 Z-travel: 3000 Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: used, Year of construction: 2001, Arrival week 46/2025 Lodoxvp D Ujpfx Ad Esrh Only 49 working hours Power (KVA): 810 Working hours: 49

Condition: excellent (used), Year of construction: 2016, clamping force: 500 kN, Equipment: documentation/manual, Engel duo 1800/500 eco drive Clamping force: 500 t Screw diameter: 70 mm Injection volume: 1139 cm3 Injection pressure: 1735 bar Distance between tie bars V: 830 mm Distance between tie bars H: 910 mm Ledpow Hbylofx Ad Eorh Type: Horizontal Drive: Hydraulic CC300 controll Hours: 38.000 Euromap 67 2 core pullers Ecodrive 2 pumps Quick clamp system

Condition: used, Year of construction: 2024, Outstanding Kraus Maffei injection moulding machine from 2024. In perfect condition with only 588 operating hours. Equipped with: 1x pneumatic valve on MOP Lrodex Ald Rjpfx Ad Ejh 1x Hydraulic Power Pack 20l 2x Hydraulic core pull 1x 4-fold water battery Can be inspected under power upon appointment. Immediately available for delivery. More info available on request. Injection unit: 1400 Screw: 60 mm / 23.00 wear protection / 25.50 Min/Max tool installation height: 250/600 mm Max opening Width: 1150 mm Ejector: Platten Ejector EM hydraulix/electric Core Pull: 2 hyd Air valves: 1 MMP Control system: MC P1 Power supply: 400 / 230 V 50Hz 3 phase with neutral Clamping force: 2500 kN Injection capacity: 679 cm³