ES 4450/600HL

ENGEL

Condition: new, Engel D 2965.1/2-G27-B5.15 motor, serial no. according to photo, unused, 100% functional, scope of delivery according to photos Fsdpei D Hu Tjfx Afksph

Condition: excellent (used), power: 16,000 kW (21,753.92 HP), fuel type: diesel, overall weight: 14,000 kg, Year of construction: 1998, operating hours: 622 h, output voltage: 400 V, nominal power: 1,600 kW (2,175.39 HP), nominal power (apparent): 2,000 kVA, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, Several identical used power generators in very good condition (fully functional) are for sale with the following details: Nominal power: 2000 kVA / 1600 kW Drive engine: MTU 16V396 Operating hours: approx. 523 hours The control unit has been completely renewed. including batteries Fedsug I U Ejpfx Afksph including operating manual including circuit diagram including new maintenance and load test Immediately available, ready for use, fully functional Price: 100,000 net

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,905 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 2,221 bar, opening stroke: 335 mm, total length: 2,420 mm, total width: 1,700 mm, total height: 3,100 mm, overall weight: 6,700 kg, Equipment: documentation/manual, For sale: Well-maintained injection moulding machine ENGEL INSERT 200V/60 with only 23,905 operating hours. The machine was used exclusively for sampling purposes. Inspection under power possible at any time! Technical specifications as per the pictures! Machine is immediately available! Fedpfsy Iwlajx Afkoph

Condition: like new (used), Year of construction: 2021, clamping force: 6,500 kN, Equipment: documentation/manual, ENGEL DUO 3660/700 ecodrive (2021) M017 CLAMPING UNIT • Clamping force: 700 T • Coining: NO • Max mold weight: 11000 kg • Max mold weight per plate: 7300 kg • Size between bars (WxH): 1100x960 mm • Min mold height: 450 mm • Max mold height: 950 mm • Max stroke open: 1850 mm • Centering ring FIX / MOVE: 160 / 200 mm • Fast clamping system: NO MOLD INTERFACE • Heating zones: 16 (16 pin TC, 16 pin PW) • Water cooling circuits: 12+12 • Hydraulic circuits (cores): 2+2 • Hot runner sliders hydraulic (nozzles): 8 • Hot runner sliders pneumatic: 4 INJECTION UNIT • Screw diameter: 70 mm • Nozzle face + thread: R??+M36x2,0 • Injection unit type: 3660 • Screw stroke: 360 mm • Max injection capacity: 1385.44 cm³ • Max injection pressure: 2300 Bar • Max injection rate: 296 cm³/s Fpodpfx Aezb H Enefksh • Accumulator SW / HW: NO / NO ⚡ *ELECTRICAL / ROBOT* • Mold ejector clamp: YES • Sockets 400V/16A: 6 • Sockets 400V/32A: 12 • Sockets 400V/63A: 0 • Robot type: Linear • Vacuum ports: 6 • Air pressure ports: 6 • User inputs / outputs: 16 / 16

Condition: used, Year of construction: 2018, Colour: White Price: On request CNC machining centre SCM ACCORD 25 FX Brand SCM Type ACCORD 25 FX  Year of construction 2018 Machine no. AA10000992 Machining table dimensions 5020x1380 mm (LxW) Worktable equipped with 2 vacuum fields Worktable equipped with 2 reference lugs Including 8 reference lugs and 8 supports  Speed XY, vector 35 m/min Fsdjycwupspfx Afksph Movement axes Maximal speed X axis 25 m/min (pro space) Maximum speed X axis 90 m/min (pro speed) Maximum speed Y axis 90 m/min Maximum speed Z-axis 30 m/min Control unit Machine control KVARA control Windows Embedded Standard 7-64bit Hard disk storage capacity 500GB-7200rpm Microprocessor Intel Pentium-2.9GHz RAM memory 8GB-DDR4 XILOG-MAESTRO software package Including vacuum pump  Motor power 5.5 kW Pump capacity 250m3/hour Vacuum pressure maximum 0.9 bar Total dimensions 9000x4500x3000 (LxWxH) Total weight 7,500 KG.  - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA10000992 - Number of milling spindles [pcs.]: 2 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - - Min. spindle speed [rpm]: 6000 - - Max. spindle speed [rpm]: 18000 - - Main motor power [kW]: 15 - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 - - Min. spindle speed [rpm]: 600 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 12 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Tool changer positions [pcs.]: 12 - System/software: SCM Maestro - Safety feature: Bumper guard - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - CNC options: Offcut conveyor - Table length [mm]: 5020 - Table width [mm]: 1380 - Working range X [mm]: 5020 - Working range Y [mm]: 1300 - Z-axis working range [mm]: 250 - X-axis maximum stroke [mm]: 5400 - Y-axis maximum stroke [mm]: 1650 - Z-axis maximum stroke [mm]: 450 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2014, Clamping force: 600 t Screw diameter: 60 mm Distance between tie bars V: 910 mm Distance between tie bars H: 1030 mm Fedpfszb E Dpsx Afksph Shot volume: 710 cm3 Type: Horizontal Drive: Hydraulic Cores 2 + 2 \+ Robot Viper 40

Condition: ready for operation (used), Year of construction: 1999, operating hours: 91,191 h, clamping force: 25,000 kN, screw diameter: 150 mm, controller manufacturer: ENGEL, This ENGEL ES 23050/2500 DUO Injection moulding machine was manufactured in the year 1999 and has 91191 production hours. It is equipped with an Engel control unit. The machine has a clamping force of 25000 kN, is in good condition and well maintained. Machine Benefits Qualitative Machine Benefits • The machine is in very good condition, with all the minor maintenances done by internal service and the most important ones done directly by engel. Technical Machine Benefits • Opening power: 1600 kn • Opening lenght: 3100 mm • Diameter of the columns: 360 mm • Dosing lenght: 720 mm • Max injected volume: 12725 cm2 • Rotational speed of the screw: 85 rpm • Specific injection pressure: 1410 bar Fodpfx Afozb Emqskoph • Heating potence: 120 kw • Heat zones: 7 Important note: The robot is not included in the price. Please inquire separately for the robot price as an extra option.

Condition: good (used), Year of construction: 2000, 20000 rpm, Fsdpfx Afer Urm Sjksph tool measurement on table will come, Parts shown by hand not come.

Condition: new, New 35 mm cylinder – fully assembled and ready for immediate use! Unpack – install – drive off! ✅ brand new ✅ fully pre-assembled ✅ immediately operational I purchase all machines and peripheral devices directly from the customer at a fair price. The resale price is calculated fairly so that all three parties – seller, buyer, and myself as broker – benefit from a small, fair deal. Untrustworthy purchase offers from various used machinery dealers are therefore not welcome. Fpsdpow Ha Nlefx Afksh

Condition: repair required (used), Injection moulding machine, Engel ES 330/85, Used machine Fjdpfx Afsukn S Hoksph As shown in the pictures, its working condition is uncertain. Overall dimensions :3100 x 1950 x 2600 mm Weight: 5500 kg Manufacturer: Engel Type: ES 330/85 Year of manufacture: 1997 Electrical data: 380V, 60 A, Contoller cards: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Condition: used, Year of construction: 2015, functionality: fully functional, workpiece height (max.): 60 mm, total length: 7,920 mm, warranty duration: 3 months, HOLZ-HER Edge Banding Machine ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15 mm. Easy program changes and tool adjustments via the 18.5" touch control panel. Short heating time of the GlueJet adhesive system, approximately 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Changing PUR glue and cleaning the system is extremely simple and can be done in just a few minutes. Axis adjustment via high-precision, repeatable servo motors. Special features for materials with protective foil, such as high-gloss and supermatt surfaces! One of the absolute highlights of this machine is the multifunction package, which excels in operations with many different edge types. The DIA tools are multi-stage and can switch between radii and bevels as the situation demands – from the longitudinal milling unit to corner copying and profile scraper. The extendable workpiece support and extended infeed section help with large workpieces, and a guiding system assists in feeding small workpieces into the machine. Edge thickness (coil material): 0.4 – 3 mm (depending on material) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application via GlueJet, suitable for both EVA and PUR adhesives, with minimal effort. Handles all popular edge types, including high-gloss & supermatt, as well as solid wood edges up to 15 mm. iTronic – pressure and glue amount control Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunction units for quick setup of radius, flush, bevel Vertical & horizontal spray units and much more. Delivery, installation, and machine commissioning can be arranged directly through us at an additional cost. The machine is currently located in our delivery warehouse in Gratwein, Austria. Fpodpfox Emf Dox Afkeh In the event of discrepancies between the German version and any foreign-language version, only the German version is binding. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Fodszcwh Aspfx Afksph Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2014, clamping force: 7,000 kN, Equipment: documentation/manual, Clamping force: 700 t Screw diameter: 55 mm Distance between tie bars V: 960 mm Distance between tie bars H: 1100 mm Fsdpfx Afezblkiskeph Shot volume: 710 cm3 Type: Horizontal Drive: Hydraulic Core pullers 2 + 2 \+ Robot Viper 40

Condition: excellent (used), Year of construction: 1992, Boy 30 T2 Closing 30 tons Year 1992 Scrow 32 Fedpfx Afjuh U Izjkjph Spray weighted 123g

Condition: excellent (used), Year of construction: 2016, clamping force: 6,500 kN, Equipment: documentation/manual, ENGEL DUO 2050 / 600* (2016) 🔧 *M006 CLAMPING UNIT • Clamping force: 600 T • Coining: NO • Max mold weight: 9500 kg • Max mold weight per plate: 6300 kg • Size between bars (WxH): 1030x910 mm • Min mold height: 400 mm • Max mold height: 950 mm • Max stroke open: 1750 mm • Centering ring FIX / MOVE: 160 / 160 mm Fedpfx Aozbdcwjfkjph • Fast clamping system: YES → Dimension: 560x560 mm → Cylinder diameter: 70 mm MOLD INTERFACE • Heating zones: 32 (16 pin TC, 16 pin PW) • Water cooling circuits: 6+6 • Hydraulic circuits (cores): 2+2 • Hot runner sliders hydraulic (nozzles): 6 • Hot runner sliders pneumatic: 8 INJECTION UNIT • Screw diameter: 60 mm • Nozzle face + thread: R20+UNF 7/8" • Injection unit type: 2050 • Screw stroke: 300 mm • Max injection capacity: 848.23 cm³ • Max injection pressure: 2400 Bar • Max injection rate: 705 cm³/s • Accumulator SW / HW: YES / YES ELECTRICAL / ROBOT • Mold ejector clamp: YES • Sockets 400V/16A: 3 • Sockets 400V/32A: 7 • Sockets 400V/63A: 1 • Robot type: Linear • Vacuum ports: 4 • Air pressure ports: 6 • User inputs / outputs: 18 / 16