ES 3550/650

ENGEL

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,029 h, functionality: fully functional, machine/vehicle number: 51561, clamping force: 2,300 kN, screw diameter: 135 mm, injection pressure: 1,600 bar, opening stroke: 3,800 mm, tool height: 1,890 mm, TECHNICAL DETAILS Clamping force: 2,300 kN Platen size (H x V): 2,900 x 2,500 mm Tie bar distance (H x V): 2,000 x 1,600 mm Minimum/maximum mould height: 700 mm/1,890 mm Csdpfxsy T Hx Ho Agfegu Maximum opening stroke: 3,800 mm INJECTION UNIT Screw diameter: 135 mm Shot volume: 8,870 cm³ Shot weight (PS): 8,071 g Injection pressure: 1,600 bar MACHINE DETAILS Net weight (with control cabinet): 113 t + 18 t Operating hours: 70,029 h

Condition: good (used), Year of construction: 2006, Controll: NC4 Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Handling capacity: 10 kg Cgsdpjrgw Exjfx Agfsu Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 61,666 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 90 mm, column diameter: 175 mm, injection weight: 2,520 g, opening stroke: 1,400 mm, The machine is in excellent condition; all hydraulic hoses were replaced in the fourth quarter of 2024! TECHNICAL DETAILS Clamping force: 6,500 kN Column spacing (H x V): 1,100 x 960 mm Platen size (H x V): 1,510 x 1,440 mm Tool height (min./max.): 650 / 1,150 mm Opening stroke: 1,400 mm Maximum distance between platens: 2,050 mm Maximum tool weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Column diameter: 175 mm Injection unit (unit 5550) Screw diameter: 90 mm Maximum shot volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./increased): 2,180 bar Injection pressure (standard): 1,910 bar L/D ratio of the screw: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticizing volume: 77 g/s Nozzle closing force: 150 kN MACHINE DETAILS Control: CC200 Drive and Supply Installed drive power: 90 kW Cylinder heating power: 56 kW Number of heating zones: 6 Hydraulic tank capacity: 1,000 l Installed drive power: 90 kW Operating hours: 61,606 h EQUIPMENT Robot: Viper 40 Csdpfxoy T Hfye Agfegu Key features: 6 hydraulic circuits on the moving platen 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (mounted on the fixed platen)

Condition: ready for operation (used), Engel GNM 5440 motor 24 V SN:J33134 ,used, normal traces of use, 100% functional, scope of delivery according to photos Cgsdpji D Hvbofx Agfsu

Condition: excellent (used), Year of construction: 2000, operating hours: 60,000 h, functionality: fully functional, clamping force: 9,000 kN, screw diameter: 120 mm, clearance between the columns: 1,120 mm, column diameter: 180 mm, displacement volume: 5,430 cm³, Equipment: documentation/manual, The machine is ready to load. 900 ton clamping force, equipped with take out robot, hopper dryer, hopper loader. First and only owner since produced. Codpfoickd Hjx Agfogu The price is loaded on truck.

Condition: repair required (used), Injection moulding machine, Engel ES 330/85, Used machine Codpfx Agsukn S Hjfsgu As shown in the pictures, its working condition is uncertain. Overall dimensions :3100 x 1950 x 2600 mm Weight: 5500 kg Manufacturer: Engel Type: ES 330/85 Year of manufacture: 1997 Electrical data: 380V, 60 A, Contoller cards: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Condition: excellent (used), Year of construction: 2014, clamping force: 7,000 kN, Equipment: documentation/manual, Clamping force: 700 t Screw diameter: 55 mm Distance between tie bars V: 960 mm Distance between tie bars H: 1100 mm Shot volume: 710 cm3 Cgsdpfxszblkis Agfeu Type: Horizontal Drive: Hydraulic Core pullers 2 + 2 \+ Robot Viper 40

Condition: used, Year of construction: 2005, operating hours: 70,000 h, functionality: fully functional, clamping force: 4 kN, screw diameter: 70 mm, Offer-Details: Stock-No. 14171 Manufacturer Engel Type of machine ES 2050 - 400 HL Year 2005 Working hours 70000 Controlversion CC200 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 4000 kN Size of mould platens (h x v) 1400 x 1080 mm Mould height min 350 mm Max. daylight 1300 mm Hydraulic ejector - stroke 250 mm Ejector force 83 kN Injection unit: Screw diameter 70 mm Injection pressure 1482 bar Stroke volume 1155 ccm Shot weight (PS) 1040 gr. Injection rate 419 ccm/s Screw speed 183 1/min Nozzle pressure 110 kN Cgsdpfx Aou Awalogfsu Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Dimensions and weights: Dimensions of the machine ca. 8,30 x 2,35 x 2,48 m Total machine weight 31200 kg Accessories: - Anti vibration pads - 2 x 24 zones water flower - Material hopper - degassing screw Additional Options: - Robot interface - 4 x hydraulic core pulls

Condition: excellent (used), Year of construction: 2016, clamping force: 6,500 kN, Equipment: documentation/manual, Clamping force: 600 t Screw diameter: 60 mm Distance between tie bars V: 910 mm Codjzbdcwspfx Agfogu Distance between tie bars H: 1030 mm Shot volume: 705 cm3 Type: Horizontal Drive: Hydraulic Core pullers 2+2 Robot Viper 40

Condition: excellent (used), Year of construction: 2016, clamping force: 6,500 kN, Equipment: documentation/manual, Clamping force: 700 t Screw diameter: 60 mm Distance between tie bars V: 960 mm Cgsdpfx Agszbdb Hefou Distance between tie bars H: 1100 mm Shot volume: 705 cm3 Type: Horizontal Drive: Hydraulic Hydraulic cores 2 + 2 \+ 6 AXIS robot arm (KUKA)

Condition: good (used), Year of construction: 1994, Fastener Codpfxec Nw N No Agfjgu

Condition: excellent (used), Year of construction: 2014, 🔧 *M001 — ENGEL DUO 1800 / 700* (2014) 📐 *CLAMPING UNIT* • Clamping force: 700 T • Coining: NO • Max mold weight: x kg • Max mold weight per plate: 7300 kg • Size between bars (WxH): 1100x960 mm • Min mold height: 450 mm • Max mold height: 950 mm • Max stroke open: 1850 mm • Centering ring FIX / MOVE: 160 / 160 mm • Fast clamping system: NO 🔌 *MOLD INTERFACE* • Heating zones: 16 (16 pin TC, 16 pin PW) • Water cooling circuits: 8+8 • Hydraulic circuits (cores): 2+2 • Hot runner sliders hydraulic (nozzles): 8 • Hot runner sliders pneumatic: 4 💉 *INJECTION UNIT* • Screw diameter: 60 mm • Nozzle face + thread: R20+UNF 7/8" • Injection unit type: 1800 • Screw stroke: 270 mm • Max injection capacity: 763.41 cm³ • Max injection pressure: 2360 Bar • Max injection rate: 710 cm³/s • Accumulator SW / HW: YES / YES ⚡ *ELECTRICAL / ROBOT* • Mold ejector clamp: YES Cgsdpjzbdbtjfx Agfju • Sockets 400V/16A: 4 • Sockets 400V/32A: 7 • Sockets 400V/63A: 1 • Robot type: Linear • Quick connector gripper: WGS-QLRD Midi • Vacuum ports: 4 • Air pressure ports: 6 • User inputs / outputs: 18 / 8

Condition: good (used), Year of construction: 2009, ENGEL EM 440/100T Clamping force: 1000 kN Opening stroke: 400 mm Ejector stroke: 130 mm Ejector force: 37 kN Screw diameter: 40 mm Max. swept volume: 220 cm³ Screw speed max: 420 rpm Injection rate: 224 cm³/s Specific injection pressure: 2200 bar Nozzle stroke: 305 mm Cgedpfx Aeyktp Sjgfsu Nozzle contact force: 40 kN

Year of construction: 2025, condition: excellent (used), We offer an unused single-screw extruder from stock. The system was operated exclusively for test purposes and is therefore in excellent, near-new condition. Ideal for laboratory use, material development, small-scale production, or custom extrusion applications. Technical Data & Features • Screw diameter: 30 mm • L/D ratio: 25:1 • Condition: unused / only test runs • Drive: 4 kW SEW motor with gearbox • Heating zones: 4 zones with temperature controllers • Control cabinet: included in scope of delivery • Die: strand die can be adapted or manufactured new upon request • Design: robust laboratory / pilot-scale construction • Mobile: base plate with heavy-duty castors – easy to position Cgedpfx Agexxim Iefju Special Features • Very compact design • Ideal for filament, profiles, lab trials and material testing • Barrel and screw in excellent condition (see photos) • Immediately available from stock

Condition: new, Year of construction: 2025, clamping force: 6,500 kN, Equipment: documentation/manual, Clamping force: 650 t Screw diameter: 80 mm Distance between tie bars V: 1440 mm Cjdjza Au Nspfx Agfsgu Distance between tie bars H: 1510 mm Opening min max: 450-950 Shot volume: 1810 cm3 Type: Horizontal Drive: Hydraulic