Shaft turning machine

EMAG VTC 250

Condition: used, Year of construction: 2003, Feed diameter 250 mm Workpiece diameter max. 140 mm Workpiece length max. 700 mm Main spindle power (40% duty cycle) 38 kW Main spindle speed max. 4,000 rpm Bwodpfx Aoydfpkogzoi Rapid traverse speed X / Z 30 / 40 m/min Tool carrier 3 x disc turret with up to 11 driven tools each, or end machining turret

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm gear width 26 mm max. module 31 min. module 0,1 Control Siemens 840 D SL Number of working hours 9598 h total power requirement 45 kW weight of the machine ca. 7 t dimensions of the machine ca. 4x3x2,5 m Gleason 100S gear shaping machine Bwodpfx Agsv Ehbbjzei for the production of internally and externally toothed cylindrical gears and other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm and workpiece axis Stand inclination range (manual) - 1/+ 11° Tool holder (manual clamping) HSK-D63 (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg with robot cell

Condition: used, Year of construction: 2006, Technical details: swing diameter: 200 mm weight of the machine ca.: 15 t Distance between tips: 832,5 mm turning length: 380 mm Bwsdpfsquy Iusx Agzoi with chip conveyor and belt filter press, infeed and outfeed belt 2 x 12-position revolvers *

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, turning diameter: 140 mm, turning height: 380 mm, turning diameter over bed slide: 250 mm, TECHNICAL DETAILS Turning diameter: 140 mm Swing diameter: 250 mm Turning height: 380 mm Travel paths Travel - X axis: 300 mm Travel - Z axis: 700 mm Spindle Spindle speeds: 1 - 6,000 rpm Drive power 40% duty cycle: 38.00 kW Spindle nose: DIN 55026 - size 6 Spindle bore diameter at front bearing: 110 mm Feed & Rapid Traverse X-axis feed rate: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis feed rate: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Z-axis feed force: 10,000 N Bsdpfswyvg Tex Agzowi Tools Number of tools in turret 1: 11 Number of tools in turret 2: 11 Toolholder: VDI 40 MACHINE DETAILS Control: SINUMERIK 840D Total power requirement: 70.00 kW Machine weight: approx. 22.00 t Space requirements: approx. 5.80 x 8.60 x H3.80 m EQUIPMENT Chip conveyor Extraction unit Infeed and outfeed Reversing gripper

Condition: used, Year of construction: 1979, max. wheel diameter 1000 mm gear width 180 mm max. module 7 min. module 0,5 min. ram stroke 16 mm Bwodpoyb S H Dsfx Agzji max. ram stroke 180 mm table hole 160 mm total power requirement 4 kW weight of the machine ca. 5,2 t

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 300 mm, travel distance Z-axis: 740 mm, spindle speed (max.): 5,000 rpm, total height: 3,900 mm, overall weight: 14,000 kg, product length (max.): 3,100 mm, number of axes: 2, General Data Machine weight 14000 kg Measurements height 3900 mm Movement X-Axis Movement 300 mm Z-Axis Movement 740 mm Bjdpfx Agjx Imr Ajzewi Main Drive Number of axis 2 Spindle Speed 5000 RPM Dimensions Machine Length 3100 mm This EMAG VTC 250 Twin was manufactured in 2015. A robust vertical turning machine featuring a MINERALIT base, it handles workpieces up to 140 mm in diameter and 630 mm in length, weighing up to 20 kg. Integrated with an EMAG pick-up system and dual turrets, each with 11 tool stations. Maximum spindle speed reaches 5000 rpm, driven by a 29 kW power unit. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2015, Main Drive Bsdex Imtgopfx Agzjwi Number of axis 2 This EMAG VTC 250 was manufactured in 2015. A vertical turning machine featuring a chuck diameter of 250 mm and maximum workpiece diameter of 140 mm. Axis travel includes 300 mm on the X-axis and 740 mm on the Z-axis. Consider the opportunity to buy this EMAG VTC 250 vertical turning machine. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2011, Mazak HC Nexus 5000-II Mazatrol Matrix Nexus Year: July 2011 Bodpfx Agov Tvh Sjzewi Pallet Size: 500 x 500 mm Movement: - X: 730 mm - Y: 730 mm - Z: 740 mm Spindle Speed: 12,000 rpm Tool Changer: 40 positions Chip Conveyor: Chrome

Condition: used, Year of construction: 2012, turning diameter 140 mm turning length 630 mm control Siemens 840 SL max. swing diameter over bed 250 mm turning speed range - main spindle 0 - 5000 min/-1 max. torque 256 Nm spindle bearing diameter 110 mm spindle bore 52 mm spindle head Gr. 6 DIN 55026 chucking diameter max. 250 mm number of tool places 3 x 12 Pos. tool taper VDI 40 max. tool weight 20 kg max. tool diameter 40 mm max. tool length 95 mm max. workpiece weight 20 kg max. workpiece diameter 140 mm x-travel 300 mm z-travel 740 mm rapid traverse x 45 / z 30 m/min total power requirement 70 kW weight of the machine ca. 25,0 t dimensions of the machine ca. 6,5 x 3,5 x 4,4 m In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features: - Siemens S120 drive systems - 3x turret, all places AGW, 2x of them with y - axis - 2x main spindle, 1x with tailstock - Spindles total 5 pcs. - Tool monitoring, Artis - Total electronic axes: 21 pcs. Accesories: - chip conveyor - Radio probe, Renishaw - Cooling unit - Infeed and outfeed conveyor Bwsdpexqrgzofx Agzei - suction There are 2 identical machines available. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, turning diameter: 140 mm, turning height: 380 mm, turning diameter over bed slide: 250 mm, TECHNICAL DETAILS Turning diameter: 140 mm Swing diameter: 250 mm Turning height: 380 mm Travel paths Travel - X axis: 300 mm Travel - Z axis: 700 mm Spindle Spindle speeds: 1 - 6,000 rpm Drive power 40% duty cycle: 38.00 kW Spindle nose: DIN 55026 - size 6 Spindle bore diameter at front bearing: 110 mm Feed & Rapid Traverse X-axis feed rate: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis feed rate: 1 - 40,000 mm/min Bjdpfoxf A Npex Agzswi Z-axis rapid traverse: 40.00 m/min Z-axis feed force: 10,000 N Tools Number of tools in turret 1: 11 Number of tools in turret 2: 11 Toolholder: VDI 40 MACHINE DETAILS Control: SINUMERIK 840D Total power requirement: 70.00 kW Machine weight: approx. 22.00 t Space requirements: approx. 5.80 x 8.60 x H3.80 m EQUIPMENT Chip conveyor Extraction unit Infeed and outfeed Reversing gripper

Condition: ready for operation (used), Year of construction: 2014, A DMG Mori CNC vertical machining center including pallet handling Lang is available. 1) DMG Mori, year of manufacture: 2014, travel X/Y/Z: 650mm/520mm/475mm, rapid traverse: 36m/min, speed: 14000rpm, spindle power: 24kW/16kW, tool holder: HSK-A63, tool positions: 30, table dimensions X/Y: 900mm/570mm, machine dimensions X/Y/Z: approx. 3900mm/3400mm/2600mm, weight: approx. 6250kg, control: Heidenhain TNC 640, operating hours: 28250h, spindle hours: 13116h. 2) Automation system for pallets Lang Eco Compact 20, year of manufacture: 2018, pallet capacity: 20, loading arm reach: 1200mm, footprint X/Y: 2000mm/2000mm. The turntable on the doors is defective. Documentation available. On-site inspection is possible. Bwodjwpk Anopfx Agzji

Condition: ready for operation (used), Year of construction: 2010, For sale is a turning line for drive shafts incl. end machining machine (cutting to length & drilling) The line consists of the following machines: Bwodpfx Agjupgbwjzji Lang -Laru > cutting to length and drilling 3x Emag VTC 250 for turning the drive shafts All machines are connected with an Ewab belt Each lathe is loaded with a KUKA robot The technical data of the machines can be seen in the pictures.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101331, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 5,000 rpm, turning diameter: 140 mm, turning length: 630 mm, TECHNICAL DETAILS Max. turning diameter: 140 mm Chuck swing diameter: Ø 250 mm Turning height: 630 mm Control: SIN840 PL Spindle Spindle speeds: continuously variable 1 - 5,000 rpm Drive power (40% duty cycle): 38.00 kW Spindle head: according to DIN 55026 - size 6 Spindle diameter in the front bearing: 110 mm Axes X-axis travel: 300 mm X-axis feed: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis travel: 700 mm Z-axis feed: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Feed force Z-axis: 10,000 N Tool turret Number of tools in turret 1: 12 Number of tools in turret 2: 12 Tool holder: VDI 40 DIN 69880 MACHINE DETAILS Total power requirement: 70 kW Machine weight: approx. 25 t Space requirement (L x W x H): approx. 6.8 m x 4.7 m x 4.3 m Bwedpfjxf An Ssx Agzei EQUIPMENT - Chip conveyor - HYFRA spindle air conditioning unit - Knoll coolant system

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Bwjdpotrd T Tefx Agzsi Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: used, Year of construction: 2008, turning diameter max. 140 mm swing diameter Futter / Chuck Ø 250 mm turning height 630 mm Control SIN840 PL spindle turning speed - stepless 1 - 5.000 U/min power capacity at 40 % load 38,00 kW Bwjdpjwhqrtjfx Agzji Spindle head DIN55026 - Size 6 spindle diameter in front bearing 110 mm travel -x axis 300 mm feed X-axis 1 - 30.000 mm/min rapid traverse X-axis 30,00 m/min feed force X axis 9.000 N travel -z axis 700 mm feed Z-Axis 1 - 40.000 mm/min rapid traverse Z-axis 40,00 m/min feed force Z axis 10.000 N no. of tools in turret 1 12 no. of tools in turret 2 12 tool taper VDI 40 DIN 69880 total power requirement 70 kW weight of the machine ca. 25 t dimensions of the machine ca. 6,8 x 4,7 x 4,3 m Chip conveyor Spindle cooling system HYFRA Coolant system Knoll