Bending machine
DURMA MRB und MRB-S Serie

Name: DURMA MRB und MRB-S Serie
Brand: DURMA
Availability: InStock

Year of construction

2024

Condition

New

Location

Staufenberg Germany

Bending machine DURMA MRB und MRB-S Serie

Machine data

Machine type:: Bending machine

Manufacturer:: DURMA

Model:: MRB und MRB-S Serie

Year of construction:: 2024

Condition:: new

Price & Location

Location:: Robert-Bosch-Str. 4, 35460 Staufenberg, Deutschland

Call

Details about the offer

Listing ID:: A4435735

Update:: 16.05.2024

Description

MRB-S Series
Technical data (see pictures)
Standard equipment
CE
Conical bend
Motorized back roller
Additional control panel for upper and
lower rollers
which are operated with landing gear.
SAE 1050 steel rollers
Induction hardened rollers,
Relaxed steel construction, at 2.5 and 3m
Machine supports, brake system
for precise bends,
Digital display.
Motorized back roller with puller
Optional equipment
Motorised under-roller mounting,
ground rollers
Extended rolls for profile bends,
Special rollers for profile bending,
Special packaging for
international deliveries.

MRB series:
Technical data (see pictures)
Standard equipment
CE standard
Digital display
Conical bend
Motorized back roller with tightening
Additional control panel for upper and
lower rollers,
Podpfx Aefin E Dohlspt
which are operated with landing gear.
operated by landing gear.
SAE 1050 steel rollers,
Induction hardened rollers,
Relaxed steel construction,
Braking system for precise bends.
Optional equipment
Motorized bottom roller with suit,
stone rollers
Extended rolls for profile bends,
special rollers for profile bending,
Special packaging for international
Programmes
Everything is configurable on demand, very short production & delivery time.
We will be happy to provide you with further information on request.
Durma Maschinen GmbH is part of the internationally successful Durmazlar Group, which exports new, high-quality sheet metal working machines all over the world and is headquartered in Türk

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2018

79 listings online

Call

Send inquiry

Telephone & Fax

+49 6406 ... show

Fax:

These listings may also fit your interest.

Listing

Plate Bending Machine - 3 Rolls NOSSTEC 8266 15/40

Unterschleißheim

1,499 km

Plate Bending Machine - 3 Rolls
NOSSTEC8266 15/40

Call

Condition: new, Year of construction: 2023, sheet width 1540 mm plate thickness 4 mm upper roll diameter 110 mm diameter of lower rolls 110 mm bending roll diameter 110 mm total power requirement 1,1 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 2,5x0,6x1,1 m New machine Cone bending equipment, hardened and ground rollers, motorized bending roller stationary control panel, digital display bending roller right and left, Ppjdpfxjvx Uvxs Ahljt digital display bottom roller

See details

Listing

Staufenberg

1,199 km

Bending machine
DURMAMRB-S 2006

Call

Year of construction: 2024, condition: new, Bending capacity: 6 mm Bending: 5 mm Bending capacity: 6 mm Bending: 5 mm Bending length: 2,030 mm roller diameter: 170 mm Ppjdpsftdh Ijfx Ahljt Engine power: 4 kW Length: 3.600 mm Width: 1,020 mm Height: 1.120 mm Weight: 2.400 kg The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request.

See details

Listing

Eccentric Press - Single Column WEINGARTEN XRR III sp

Schmölln

1,429 km

Eccentric Press - Single Column
WEINGARTENXRR III sp

Call

Year of construction: 1965, condition: used, pressure 150 t throat 550 mm stroke 10 - 140 mm table surface area 1180 x 980 mm no. of strokes 40 Hub/min dayligth 500 mm ram surface 1040 x 800 mm ram adjustment 70 - 150 mm tool shank hole (depth x diameter) 435 x 55 mm Podpfxecubate Ahljpt required power 15 kW weight of the machine ca. 12 t dimensions of the machine ca. 3 x 1,7 x 3 m - with additional brake - slide weight compensation - motorized slide adjustment - central grease lubrication (manual) - table mounting plate - safe for manual inlay work

See details

Listing

Birmingham

440 km

Press brake
ErmakMicrobend 1000x40

Call

Condition: as good as new (ex-display), Year of construction: 2020, machine/vehicle number: 1000x40, functionality: fully functional, pressing force: 40 t, total length: 2,300 mm, total width: 1,950 mm, overall weight: 1,850 kg, working width: 1,000 mm, working range: 1,000 mm, Equipment: safety light barrier, Used Like New Ermaksan 1metre x 40ton 3axis cnc downstroke pressbrake for sale Complete with Cybelec Cybtouch 12 Control Year 2020 Specifications Max. bending length 1metre /1000 mm Distance between column 800 mm Max. pressing force 40 Ton Beam stroke 100 mm Table Width 90 mm Load more specifications Dimensions (Estimate) Length 2300 mm Width 1950 mm Height 1860 mm Weight 1850 kg Psdpfsvy Ewisx Ahljpt Complete with lower multi v tooling and segmented upper tooling

See details

Listing

Concrete Pipe Machine ZİM Mühendislik ZIM T SERIES

Saray

3,396 km

Concrete Pipe Machine
ZİM MühendislikZIM T SERIES

Call

Year of construction: 2022, condition: new, ZIM T1200 machine can produce pipes 300mm – 1200mm diameter and 500mm – 2500mm height by single, double and triple pressing. 150mm and 200mm pipes also can be produced for special demands. Machines can be designed semi or full automatic according to requirements. We use SIEMENS brand PLC microprocessors on automatic machines. Ppodpfx Asibbikshlst There exists motrar bunker and motrar filling systems on machines. Produced materials can be carried to drying area with carriage carts or forklifts. Production is done on production pallets, Materials up to 800mm diameter are carried to drying area with carriage carts, pipes bigger than 800 mm diameter can be carried with forklift. For fast production, pipes bigger than 300mm diameter also can carried to drying area with forklift. Machine makes production by hydraulic press and vibration. Vibration system of the machine is special design of ZIM Engineers. Vibration system which have oil cooling system and special oil unit. This system can be controlled electronically. Special designed strong chassi of the machine enables long live producing without errors.

See details

Listing

Eccentric Press - Single Column WEINGARTEN N 63

Eislingen/Fils

1,357 km

Eccentric Press - Single Column
WEINGARTENN 63

Call

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm Pjdpfx Ajfx Hv Hehlept ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

See details

Listing

Mitre cold circular saw automatic machine, automatic saw with material feed, circular saw automatic KALTENBACH KKS 400 NA

Hessisch Lichtenau

1,244 km

Mitre cold circular saw automatic machine, automatic saw with material feed, circular saw automatic
KALTENBACHKKS 400 NA

€3,000

~~€3,500~~

Fixed price plus VAT

Call

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm Ppsdpfx Ahed N H A Nolst - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

See details

Listing

Birmingham

440 km

Press brake
BystronicXpert 40/1030

Call

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, operating hours: 49,641 h, stroke length: 200 mm, oil tank capacity: 100 l, travel distance X-axis: 300 mm, controller manufacturer: Bystronic, working width: 60 mm, bending force (max.): 40 t, back gauge speed R-axis: 500 mm/s, back gauge travel distance R-axis: 100 mm, back gauge travel distance Z-axis: 955 mm, control type: CNC control, actuation type: hydraulic, Equipment: CE marking, documentation/manual, emergency stop, finger protection, safety light barrier, Used Bystronic Xpert 40ton x 1metre cnc pressbrake for sale Model: Xpert 40/1030 Tonnage 400 kn Bending length 1030 mm Standard stroke [S] 200 mm Open height [D] 515mm Distance between side frames 1060mm Table Width 60mm Max. back gauge range X-axis 500mm X-axis travel 300 mm X-axis speed 1500 mm/s R-axis travel 100 mm R-axis speed 500 mm/s Z-axis travel 955 mm Z-axis speed 2000 mm/s Y-approach speed (up to) 300 mm/s Y-working speed (up to) 25 mm/s Accuracy Y-axis 0.004 mm Oil capacity 100 l Electric supply 7.5 kw Weight 4t Length, approx. [L] 1520 mm Width, approx. [W] 1584 mm Pedpfxjxtf A Ie Ahlept Height, approx. [H] 2449 mm 1.1 Xpert 40/1030 1.2 ByVision Bending control with 22 Inch Full HD display and touch technology 1.3 Dynamic drive system (DDS) with Energy Saver 1.4 Automatic tool protection 1.5 Ergo foot switch 1.6 Rear protection sliding door electrically controlled 1.7 User manual (on CD) 1.8 Ambient air temperature 7°C up to 35°C 1.9 Voltage: 400/480 V, 50/60 cycles, 3 Ph (other parameters available on request)

See details

Listing

Kłodawa

1,562 km

Sandig machine
HOUFEKRR 630 mm

Call

Year of construction: 2001, condition: like new (used), Double-aggregate grinder, two lower aggregates 2 x7.5 kW main power, 4 kW feed, lifting and lowering 2 kW, the machine after renovation, conveyor belt in very good condition. New graphite shoe. The machine has two aggregates from the bottom, contact rollers rubber first shaft second Combi system with graphite runner. Working width 630 mm. Two feed speeds slower faster. Length of grinding belt 1900 mm. Pneumatic oscillation. Tensioning the belts pneumatically. Speed of grinding belt 18 m / s. grinding shoes 1. Declaration of conformity CE power 21 kW nominal whole. Machining height 160 mm. Maszyan has two lower working shafts. Transport tape top system. Podpefxpbmofx Ahljpt

See details

Listing

Saerbeck

1,076 km

Press brake
DURMAAD-S 30320

Call

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: New (delivery time 6-8 weeks) Pedpfx Ahsfifg Hslspt Control: DT 15 bending length: 3050 mm distance between the columns: 2600 mm Y Fast speed: 160 mm / s Y Working speed: 10 mm / s Y Retraction speed: 140 mm / s Motorized crowning table length: 630 mm table width: 154 mm table height: 900 mm stroke: 365 mm Projection: 410 mm 2 support arms 2 Backgauge fingers Travel speed X-axis: 250 mm / s R-axis working speed: (max.) 140mm / s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Option: CE standard with manual fussler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4 axes) CNC motorized crowning Engine power 37 kW Oil tank capacity 250 lt length 4300 mm Width 1820 mm Height 3230 mm Weight approx. 17250 kg

See details

Advertise here