Multi-spindle table drill DUBUS

dubus ciul wie

Condition: refurbished (used), functionality: fully functional, overall weight: 540 kg, total length: 905 mm, total width: 950 mm, total height: 1,125 mm, Year of construction: 2013, operating hours: 50 h, input frequency: 50 Hz, shaft diameter: 40 mm, type of input current: three-phase, Equipment: emergency stop, rotational speed infinitely variable, Profile Bending Machine ARKUS12 Tablet350 (refurbished) For sale is a profile bending machine ARKUS12 with Tablet350 control system, year of manufacture 2013. The machine was completely refurbished in 2026 and technically upgraded to the new Tablet350 control system. With only approximately 50 operating hours since the overhaul, the machine is in an excellent, nearly new condition and is available immediately. Technical Data: Machine type: Profile Bending Machine Manufacturer / Model: ARKUS12 Control system: Tablet350 (2026 upgrade) Year of manufacture: 2013 Operating hours: approx. 50 hrs Condition: As-new, fully refurbished and upgraded Warranty: 2-year warranty on electronics Laedpfx Apoy Exdfemed Availability: Immediate Further technical details and specifications as per manufacturer can be found at pbt-ag.com. Note: The sale is made under exclusion of liability for material defects, except for the stated warranty.

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Compact and flexible in the smallest of spaces. Workpieces receive their finish within a length of just 2.13 m. Equipped with a 1.1 kW high-frequency motor joining unit and diamond-tipped spiral joining cutter, Teflon-coated glue unit, pre-end trimming unit, and HF multifunction milling unit. Two free slots for finishing units, such as a surface scraper and polishing unit. Simple operation via 3.5'' color touchscreen. Technical data Lodsy Eizzjpfx Apmjad Machine length: 2,122 mm Workpiece thickness: 10–45 mm Minimum workpiece width: approx. 120 mm Edge thickness: 0.4 – 2.0 mm Edge height max.: workpiece height + 4 mm (2+2) Electrical connection: 400 V Total connected load: 3.6 kW Feed speed: 6.5 m/min Pneumatic connection: 6 bar Net weight: approx. 490 kg Options: Surface scraper unit Diamond tools, height = 45 mm Location: Flörsheim Availability: short-term

Condition: used, Used machine Drilling unit with 21 spindles Drilling distance 32 mm, max. 640 mm, by moving the workpieces max. 2656 mm with oil brake cylinder Stroke max. 130 mm Motor 2.5 HP Machine dimensions approx. 1450 x 1100 x 1600 mm Weight approx. 240 kg Lajdpjw I Um Hofx Apmed Availability: approx. 2 weeks after receipt of order Location: Hochheim Hochheim

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 101-335, functionality: fully functional, Machine available starting in early October 2026. The machine can be inspected and demonstrated at the customer's site. Workpiece thickness: 8 - 60 mm Workpiece length: min. 160 mm Feed rate: 10 m/min -extendable workpiece support -motor-driven pressure bridge, PLC-controlled -1888 control panel PPC 231 U+E -1801 joint milling unit incl. 2 joint milling cutters 70x64x30 -1903 edge feeder, fully automatic -GJ 301 Glue-Jet adhesive application system incl. sensing nozzle and cartridge magazine for EVA & PUR adhesive cartridges -1912-3 printing unit, pneumatic -1918 trimming unit with pneumatic swivel 0 -12° via PLC -1827 milling unit, motor 4, pneumatic, via PLC 1832 profile milling unit (Auriga SPS) Lodpfxezg Upwe Apmjad 1929 radius scraping unit, motor 2, SPS 1964 surface scraping unit 1856 release agent application at the front, cleaning agent application at the rear, spraying 1940 wiping unit Overall length: 4930 mm Weight: approx. 1430 kg

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers Ledpfx Aezccuuspmoad TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: good (used), functionality: fully functional, Row drilling machine SCHEER, 21 spindles, non-swiveling Lsdpfx Apjxlt R Romsad