30KW cylinder shredder

Drevoindustria DI Mechanik SDOP 400/3

Condition: good (used), functionality: fully functional, Processing plant for (track) ballast 40 cbm feed hopper with push cart OMT 120 kW impact mill with feed and discharge chute Double-deck screening plant 1,400 x 4,000 m with conveyor and stockpile belts Ppedpfx Aotpamgshlet Complete electrical installation

Condition: new, Year of construction: 2026, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 30 kW ✔ Shaft length: 870 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 38 ✔ Granulation: 10-50 mm ✔ Capacity: up to 8 m3/h* ✔ Filling opening: 2031 x 1565 mm ✔ Dimensions L/W/H: 3,21/1,97/2,04 m ✔ Weight: 2450 kg Ppjdpfxjiq U Ayj Ahlot 2 years warranty or 2000 working hours

Condition: new, functionality: fully functional, power: 10.2 kW (13.87 HP), fuel type: diesel, fuel tank capacity: 15 l, color: red, overall weight: 1,500 kg, empty load weight: 1,450 kg, operation weight: 1,500 kg, lifting height: 2,740 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2025, operating hours: 1 h, Equipment: additional headlights, adjustable chassis, cabin, parking heater, rubber tracks, OFFER!! €15,000 net!! Special offer: Only €15,000 net – including 3-year warranty, comprehensive spare parts supply, warranty & post-warranty service, and dedicated customer support. KINGWAY DEUTSCHLAND e. K. is the main dealer for the Kingway brand in Germany. We serve the entire German market and all neighboring countries, delivering machines to any destination worldwide. If you need a transport quote, have questions about our machines, or are interested in establishing a dealer network in your country, contact us! We offer a huge range of machines and sell over 3,000 units annually. If you are interested in additional models, please visit our website where you are sure to find the right machine for your needs. MINI EXCAVATOR YAMA S15K - KUBOTA TECHNICAL DATA: Machine weight: 1,500 kg Bucket volume (3 buckets included): 0.03 m³ Engine model: KUBOTA Engine power: 18.4 kW / 25 hp Number of cylinders: 3 Oil cooler: Yes Swing arm: Yes Extendable tracks: Yes Maximum climbing ability: 35º Pump type: Gear pump Pressure: 16 MPa Hydraulic oil flow: 25 l/min Maximum speed: 2 km/h Platform rotation speed: 9-10 rpm Digging force: 13 kN Ground pressure: 30 kPa Fuel tank capacity: 15 L DIMENSIONS: Length: 2,550 mm Width: 1,100 mm Height: 2,310 mm Bucket width: 1,160 mm Bucket height: 210 mm Track width: 920 mm Pjdpfxev Av Idj Ahlopt Track shoe width: 230 mm Ground clearance: 380 mm Standard bucket width: 380 mm Total track length: 1,300 mm WORKING RANGE: Maximum digging height: 2,740 mm Maximum dumping height: 1,750 mm Maximum digging depth: 1,800 mm Maximum vertical digging depth: 1,320 mm Maximum digging radius: 2,400 mm Minimum swing radius: 1,550 mm Maximum dig radius at ground level: 3,227 mm Maximum height of raised dozer blade: 325 mm Maximum depth of lowered dozer blade: 175 mm PRICE: €13,500 net €16,065 gross - INCLUDES 3 digger buckets (200, 400, 800) - For machines regularly serviced by us, we EXTEND THE WARRANTY to TWO YEARS - 12 MONTHS FREE WARRANTY - after this period, all original spare parts available on demand! - FREE delivery within a 200 km radius - VAT-free sale possible (with valid VAT ID) - FINANCING available - We are always at your service! - We have our own mobile and stationary service teams, available for all our customers at any time.

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Psdpfx Aev Sqrpohlopt Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: good (used), Year of construction: 1995, Chipper with horizontal feed via vibratory chute Ppodpfx Ahsxc H Rlelet Motor: 30 kW Max. feed width: 320 mm Max. feed height: 80 mm With conveyor belt

Condition: like new (used), Year of construction: 2014, functionality: fully functional, crusher SG - 500/200 - the crusher is completely overhauled and ready for operation - the crusher is also equipped with a vibrating conveyor 8 m long with a separation where sawdust is separated and equipped with a magnet with metal detection in the attachment you will find technical parameters for the machine ¨ Ppjdpewhw Iuefx Ahlst - electrical switchboard for the machine.

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed max. infeed width 450 mm max. infeed height 140 mm Motor 75 kw with frequency converter for variable speed no vibrating chute included Pedou Rl Ruepfx Ahlept

Condition: used, Year of construction: 1980, No. 3192 Four-sided planing machine WEINIG U 17 A Used, year of construction 1980, machine available from February 2025 Machine still in operation 6 spindles Arrangement of spindles bottom - right - left - top - bottom - bottom Working width 170 mm (with a tool flight circle of 125 mm) Working height 120 mm (with a tool flight circle of 125 mm) Joining spindle 4 HP All other spindles 5.5 HP Feed 2 or 3 HP Speed of the work spindles 6000 rpm Work spindles Ø 40 mm Smallest flying circle Ø of the moulder spindles 100 mm Largest flying circle Ø of the moulder spindles 180 mm Continuous feed, infinitely variable 6 - 18 m/min Transport roller Ø (hardened) 140 mm Transport roller width 50 mm Adjustment range of feed table and joining ruler right 10 mm Adjustment range of vertical spindles under table 40 mm Adjustment range of the horizontal spindles (axial) 30 mm Dressing table length 2 m Sale on behalf of customer, ex location Upper Austria, without disassembly, without transport and assembly Errors in description and price excepted Disassembly, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location Pjdpfxovkhcce Ahlopt

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, used automatic edging line Möhringer Autojet S-singulator, infeed roller conveyor, through-feed cross-cutting automatic measuring table with infeed edging saw with double-lamella chip separator driven roller conveyor with pull-off device Podpfx Ahsw Tkt Heljpt control system and electrical cabinet

Condition: good (used), Year of construction: 2008, Vacuum lifter VacuMaster Type:VM-ECO-500-H-1 Year 2008 in good condition . Psdeqxat Hopfx Ahlspt