Donaldson welding fume extractor

Donaldson Torit 2DFP4-SPRK

Year of construction: 2000, condition: used, Drais Mannheim / Lödige CoriMix® CM Continuous Ringlayer Mixer Type: K-TT 700 Motor: 55 kW 1500rpm Fully Stainless execution Fedpfx Agsh H S Hds Iepl

Condition: new, Year of construction: 2026, functionality: fully functional, Are you looking for an ironclad supply or discharge conveyor we will build them for you in any size or shape. We are also an excellent partner for your drain screws. Fpedpfx Aet Iwgnjg Iol Conveyor belts, supply belts in almost any size, with closed sides, carriers etc. etc. entirely according to your wishes and requirements.

Condition: new, New equipment MASS International NPS accumulation conveyor Conveyor belt / accumulation belt available for short-term delivery Fedpfx Agoizi S Ds Iepl Accumulation surface without side walls Height-adjustable, mobile on steerable swivel casters Example: NPS 1 Length 1500 mm Usable width 250 mm External width 250 mm (without motor) Accumulation surface without side walls, therefore full usable width Height-adjustable discharge height 200 - 400 mm PU belt, smooth, black Belt speed 3 m/min Conveyor belt mobile on steerable swivel casters The quoted price refers to the NPS1. Optional: Dimensions according to any customer request Belt approved for food (FDA compliant) Modified belt speed Frequency inverter for stepless adjustment of the belt speed etc.

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 120 M with automatic machine detection Clean air extraction system with H3 certification Fedpfx Aohkztwsg Ijpl Intake nozzle: 120 mm Motor rated power: 1.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum air flow rate: 1,140 m³ / h Nominal air flow rate: 814 m³ / h Negative pressure: 2,180 Pa Filter area: 5.1 m² Chip collection volume: approx. 135 liters Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Weight: approx. 121 kg Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2017, Separator, dust separator, welding fume filter, filter system, cartridge dust extraction system, cartridge filter unit, cartridge filter -Condition: unused, without extraction fan -Manufacturer: INFASTAUB, filter system cartridge filter with pneumatic filter cleaning -Type: AJV 800-980-22 P -Cyclone separator: made of stainless steel Fedpfx Ageytgrxs Iepl -Inlet opening: Ø 110 mm -Outlet opening: pneumatic shut-off valve Ø 300 mm -Dimensions: 1730/1730/H5500 mm -Quantity: 2 pieces available Price: per piece -Transport dimensions: 4 loading meters, height 1730 mm -Weight: 1120 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Aluminum Z-conveyor belt with base frame, including adjustable feet and freely swiveling transport castors with parking brakes. Horizontal section: 800 mm Inclined section: 3,000 mm Second inclined section: 1,200 mm Angle of incline at each bend: 60° Total conveyor belt length measured on the floor: 3,500 mm Height of the horizontal section: 400 mm Design: Fjdpfxsyhzhno Ag Iepl - Aluminum construction with 2x reinforced profile, 90x45 mm - Full-surface discharge sheet, 2.0 mm, galvanized - Drive roller and deflection roller made from welded and machined S235 steel - Ø100x720 mm crowned turning, shaft fixed with pillow block bearings Drive: Parallel shaft geared motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50 Hz, protection class IP54 Drive wired ready for connection up to the motor junction box (commissioning must be performed by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU, including wave edge PU, petrol matt finish, AS, especially cross-rigid with hard cover Conveyor belt width: 700 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats, centered, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 500 mm, determined as follows: (top view) Cross-section 70+25+5+500+5+25+70 mm Belt guidance via PVC V-guide on the running surface, profile 10x6 mm - Includes cut-out in the discharge sheet - Includes slide bushings in the drive and deflection rollers

Condition: excellent (used), Year of construction: 2014, 2 used rapid steam generators ----- Manufacturer: CERTUSS Type: Universal 500TC Capacity: 500 kg/h Maximum heat output: 364 kW Operating pressure: 10 bar Test pressure: 57 bar Water content approx.: 42.9 liters CE marking: CE 0035 Year of manufacture: 2014 Equipped with a Certuss gas burner, gas control system, control cabinet with touch control, mounted on the boiler body, Fsdpfjzgvifsx Ag Ijpl feed water pump, and the existing coarse and fine fittings.

Condition: excellent (used), Metering rotary valve, rotary valve, metering valve, rotary valve for screw conveyor, transport screw, screw conveyor, conveying technology, pipe screw conveyor -Rotary valve: completely overhauled -Manufacturer: Rota Val, rotary valve type HD 300 with drive -Drive motor: SEW Eurodrive 0.37 kW -Speed: 1400 / 33 rpm -Inlet opening: 300 x 300 mm -Outlet: 300 x 300 mm -Dimensions: 720/700/H460 mm -Weight: 183 kg Fpodpohgm Dqjfx Ag Iel

Condition: excellent (used), The system is suitable for conveying, loosening, and gently mixing bulk materials, granules, powders, or similar materials. The special screw geometry with mixing/paddle sections not only transports the material but also moves and mixes it during the conveying process. Fpodpfxozabrme Ag Iol Technical data: * Manufacturer: Waeschle / Wäschle * Type: DST 200 * Year of manufacture: 2001 * Screw diameter: approx. 200 mm * Motor power: 2.2 kW * Design: Stainless steel * Function: Conveying, loosening, mixing * Immediately available from stock

Year of construction: 1986, condition: good (used), Rotary device for edge processing, turning station, turning table, rotary station, rotary table, transport system, roller conveyor -for edgebanding machine, edge banding machine, edge bander -Turning station: for rotating workpieces -Roller track: Narrow -Roller width: 1300 mm Fjdpeb Rynysfx Ag Iepl -Roller conveyor length: 2900 mm -with: adjustable impact wall -Roller conveyor: Wide -Roll width: 3400 mm -Roller conveyor length: 1400 mm -Swivel head roller: rubberized -Transport dimensions: 3000/1500/H960 mm 3500/1550/H1850 mm -Weight: 1000 kg