Deposit conveyor belt

Mass International S.r.l. NPS

Year of construction: 2000, condition: used, Drais Mannheim / Lödige CoriMix® CM Continuous Ringlayer Mixer Type: K-TT 700 Ljdpfx Akeh H S Hdolehl Motor: 55 kW 1500rpm Fully Stainless execution

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total height: 9,350 mm, total width: 3,980 mm, total length: 3,074 mm, load capacity per storage section: 380 kg, input voltage: 400 V, 3 pieces in stock Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type : SHUTTLE-XP-500-3650x864 Control : C3000, with B/W OP3000 display Serial No. : 06009822 Year of construction: 2006 Load per tray: MediumX: 380 kg (proportionally distributed) Tray dimensions: 3650 x 864 mm Number of trays: 48 pieces (more on request) Dimensions Shuttle W x D x H: 3980 x 3074 x 9350 mm (height Kardex is adjustable to available height) Power: 3/N/PE400 V, 17 A, 50/60 HZ, 8.6 kVA This offer is valid provided system is unsold Technical details each Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 32,700 kg - Maximum tray capacity: 48 trays: 380 kg each, evenly distributed, More trays can be ordered. - Tray dimensions: 3650 x 864 mm - Machine dimensions: Wide x Depth x Height: 3980 x 3074 x 9350 mm - Footprint of the system appx: 12.23 m2 - Capacity with 48 trays: appx. 151 m2, every tray is appx. 3.15 m2 - Electronic volume measuring system in 25 mm screen (grid) - An access opening with sliding doors to protect people and stored goods - Control C3000, with B/W OP3000 display - LED Anti-dazzle lighting above access point - Use of toothed-belt for minimum noise - Use of toothed-belt for fastest order picking Price: On request only by e-mail Price: excl. VAT, including transport, assembly and warranty Delivery time: from stock Machinehandel De Leeuw BV is one of the few companies in Europe that trades and has in stock mainly used Kardex Remstar VLM automatic Lift & rotating warehouse systems. See our website for the current stock. We assemble and/or disassemble these systems in a safe manner with VCA certified technicians and we have been doing this for more than 30 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Lhodpswgyxtsfx Aklol Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 8 kW Rated power of cooling unit: 3 kW Refrigerant: R422D Water tank volume: approx. 35 liters Circulation pump flow rate: 40 liters/min Lsdpfopu R Ncjx Akljhl Pump output: 0.63 kW Water connections: 1/2 inch Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg

Condition: new, Year of construction: 2026, functionality: fully functional, power: 55 kW (74.78 HP), number of axes: 2, overall weight: 49 kg, table length: 500 mm, table width: 300 mm, Equipment: CE marking, documentation/manual, Compact and multifunctional machine that embodies the latest innovations in the laser industry. Equipped with a built-in chiller and one-click autofocus, it is perfect for engraving and cutting non-metallic materials. Certified as FDA Class 1, this machine is an excellent choice for starting a business, small-scale production, or creating tools for a workshop. You can give our managers a call for additional details! Wattsan 0503 Hobby-T characteristics Working area: 500x300 mm Laser power: 55 W Positioning precision: Up to 0,02 mm Machine size: 975 x 540 x 225 mm Weight: 49 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK Lhjdpfxsh R Iy As Akljl On our website you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. Lhedpfxeyx Uy As Aklsl • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: used, Rollenschneider Aufwickler / Slitter Rewinder Kampf Conslit 16/06 ÜK in good working condition. Rollenschneider Aufwickler / Slitter Rewinder Kampf Conslit 16/06 ÜK Ledpfx Aeylw Dijklehl Baujahr / Year 1999 - Serial-No. 210271 Arbeitsgeschwindigkeit / Speed max. 550m/per Minute Arbeitsbreite / Working width max. 1650mm Schnittbreite min. 50mm bei Hülsen 70 & 76mm /  Cutting width min. 50mm  Cutting width 70 & 76mm Schnittbreite min. 200mm bei Hülsen 152mm /  Cutting width min. 200mm  Cutting width 152mm Zu verarbeitendes Material / Material to be processed: Kunststofffolien aus / plastic films made of: PE, PP, PA, PET, PVC, Papiere und Laminate Hartfolien / hard films ca. 10 - 250 µm Weichfolien / Soft films ca. 20 - 500 µm Aufwicklung / Rewinder Aufwickel-Druchmesser / Rewinder Diameter max. 610mm Aufwickelhülse / Winding Sleeve: Pappe, Kunststoff oder Metall / Cardboard, Plastic or Metal Innendurchmesser d. Hülse / Diameter inside 70mm, 76mm and 152mm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Conveyor belts, transport belts, chip conveyors. Lhjdsd A Ttfspfx Aklel Conveyor length, belt width, drive power, surface finish, and other technical details are available upon request and can be customized to meet customer specifications.

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Manufactured in 2016/2017. The machine is 100% operational and ready for operation. This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Technical specifications: Lodpfjzlgbpsx Aklshl Max sheet size: 760mm x 1120mm Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Max operating speed: 35m/min Built-in Becker compressor Weight: 2800kg 380V power supply Additional air supply: 6 bar Power consumption: 18kW Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Touch panel for easy operation. Sheet straightening module. Tool kit and foil included.

Condition: used, machine/vehicle number: 13557, Year of construction: 2005, Manueller Handstapler / Manual Hand Stacker Carl Stahl FL 600Baujahr / Year 2000 - Serial-No. 13557 Tragkraft / Capacity max. 600 kg Eigengewicht / own weight 210kg Hubhöhe / Lift high max. 1600mm Ljdpfx Akjiw Em Dslohl Gabel Länge / forks length 1.150 mm Lastschwerpunkt / Load Center 600 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2005, machine/vehicle number: 22062, Palettenheber / Pile Hoists - Stack Lift Baumann NUP 1600 Baujahr / Year 2005 - Serial-No. 52970 Format / Size max. 1500 x 1185mm Hebekapazität / Loading capacity max. 1600KG Hubhöhe / Lifting height max. 1400mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Lhsdpfx Aeip Etxeklsl