Vertical Machining Centre

DMG DECKEL MAHO DMC 64 V linear

Condition: ready for operation (used), Year of construction: 2002, operating hours: 24,396 h, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table width: 600 mm, table length: 850 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 14,000 W, number of slots in tool magazine: 30, number of axes: 4, This 4-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2002. It features a travel of 640 mm on the X-axis, 600 mm on the Y-axis, and 500 mm on the Z-axis. The machine has a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 64V linear vertical machining centre we have for sale. Contact us for further details. • Condition: Used (good) • Operating hours: 24396 h • Electrical: • Nominal power: 39 kVA • Voltage: 400 V Fedpfxsyz Tkfs Ahljpk • Frequency: 50 Hz • Secondary voltage: 230 V • Control voltage: 24 V • Current: 63 A • Current (max): 56 A • Rapid traverse: • X: 60 m/min • Y: 40 m/min • Z: 40 m/min • Feed Force (X, Y, Z-Axis - 40% ED): 7000 N • Feed Speed (X, Y, Z-Axis): max. 40 m/min • Rapid Traverse (Y, Z-Axis): 40 m/min • Rapid Traverse (X-Axis): 60 m/min • Ball Screw Diameter/Pitch (X, Y-Axis): 40 x 15 mm • Position Accuracy (Y, Z-Axis Standard - Indirect Measurement System): 0.020 mm • Position Accuracy (X-Axis Standard - Direct Measurement System): 0.005 mm • Position Accuracy (Y, Z-Axis Option - Direct Measurement System): 0.008 mm • Resolution: 0.001 mm • Input Resolution (X, Y, Z-Axis): 0.001 mm • Main Drive Power (40% / 100% ED): 18 / 14 kW • Main Drive Torque (40% / 100% ED): 95 / 75 Nm • Front and Rear Spindle Bearing Diameter: No specification • Spindle Speed: Infinitely programmable from 0 to 12,000 min⁻¹ • Setup Operation Spindle Speed: 0 to 800 min⁻¹ • Program Check with Manual Intervention Spindle Speed: 0 to 5,000 min⁻¹ • Motor Type: Direct drive via speed-controlled asynchronous motor with liquid cooling • Maximum Torque (S1 - 100% ED): 70 Nm • Maximum Torque (S6 - 40% ED): 100 Nm • Maximum Motor Power (S1 - 100% ED): 13 kW • Maximum Motor Power (S6 - 40% ED): 19 kW • Included Equipment: Chip Conveyor (Spiral type) • Chip Conveyor Discharge Height: 380 mm • On this machine, compressed air can be activated through the spindle using an M-code command

Year of construction: 1980, condition: good (used), A used, very well-maintained cycle-controlled lathe from Weisser Heilbronn with a SIEMENS control system. Distance between centers 2000 mm Center height 295 mm Swinging diameter over bed 600 mm Swinging diameter over cross slide 260 mm Swinging diameter in the crotch 800 mm Total length of the crotch 375 mm Bed width 450 mm Travel of X-axis 350 mm Travel of Z-axis 1850 mm Spindle nose DIN 55022, size 8 Spindle speed, number 18, 14 – 1400 rpm Fpedpfxogyy I Ao Ahlek Spindle bore 71.5 mm Diameter of front bearing 110 mm Feed range 0.01 – 40.95 mm/rev Rapid traverse 8 m/min DC drive 15 kW 400V 50Hz Max. permissible torque on the spindle 2500 Nm Tailstock quill 80 mm Quill stroke 250 mm Internal taper in quill MK 5 Length x width x height Machine weight 5500 kg Accessories: Tailstock Pneumatic three-jaw chuck with replaceable jaws, 315 mm Quick-change tool holder "MULTIFIX" in front of the center, size "C" Four-position turret behind the center Tool holder Coolant system Follow rest, pneumatically actuated Technical data and dimensions: Subject to change without notice. Video conference via WhatsApp possible after scheduling an appointment.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,900 h, General Data Machine weight 6800 Main Drive Spindle speed range 12000 Movement X-Axis Movement 640 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm Table Outer length 850 mm Outer width 600 mm Fedpfx Ahjx Stl Dslopk This 3-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2005. Ideal for precision machining, this vertical machining center offers robust performance and reliability. Consider the opportunity to buy this DMG DECKEL MAHO DMC 64V linear vertical machining center. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning length: 750 mm, turning diameter: 590 mm, spindle bore: 78 mm, spindle speed (max.): 3,000 rpm, Equipment: documentation/manual, Centre distance: 750 mm Swing: 590 mm over bed / 375 mm over slides Spindle speeds: 25 - 3.000 rpm Spindle bore: 78 mm Fpsdpexmvzujfx Ahlok Revolver: 10 Platze Controller: Siemens 810D Shopmill Featured with: - Double footpedals - Chipconveyor - Machine manuals Country of origin: Z. Korea Motor power: 25 kW Machine weight: 6.000 kg Machine LxWxH: 300 x 180 x 190 cm

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN 530, workpiece length (max.): 1,250 mm, workpiece width (max.): 850 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 1,200 kg, table width: 850 mm, table height: 640 mm, table length: 1,250 mm, spindle speed (max.): 18,000 rpm, distance table to spindle center: 700 mm, number of slots in tool magazine: 60, Equipment: chip conveyor, rotational speed infinitely variable, DECKEL MAHO DMC 100V Machine after complete rebuild. Spindle overhauled and bearings replaced. Tool measurement laser: BLUM Due to company restructuring, we have for sale: HIGH-SPEED 3-AXIS MACHINING CENTER Manufacturer: DECKEL MAHO Model: DMC 100V LINEAR Control: HEIDENHAIN 530 Year of manufacture: 2003 Table size: 1250x800 mm Travel: X 1000, Y 800, Z 500 mm Workpiece weight: max. 1200 kg Major machine overhaul: 06.2025 Spindle: HSK 63A 18000 rpm Power S1/S2: 15kW/19kW Torque S6 40%ED: 130Nm Tool changer: 60 positions Workpiece probe: HEIDENHAIN Tool probe: BLUM laser Fpjdpfxox Elxij Ahlok Chip conveyor Internal coolant supply (IKZ) Machine in very good condition, after complete overhaul. Regularly serviced. Machine is in continuous operation.

Condition: used, Year of construction: 2007, functionality: fully functional, total height: 5,980 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 460 kg, input voltage: 400 V, Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: Year of construction: 2007 Total Load: 2 x 33,500 kg Load per tray: 460 kg (evenly distributed) Tray dimension: 3050 x 864 mm Number of trays: 32 pieces (more on request) Dimensions Shuttle W x D x H: 3380 x 3074 x 5980 mm (height Kardex is adjustable to available height) Dimensions Shuttle D with full tray extraction table: 4198 mm Power: 3/N/PE400 V, 17 A, 50/60 HZ, 8.6 kVA This offer is valid subject to the system being unsold. Fpedpfx Aewnankshlek Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 32 trays Medium X Type 2, 460 kg each, evenly distributed; more trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions: Width x Depth x Height: 3380 x 3074 (4198) x 5980 mm - Footprint of the system approx.: 14.19 m2 - Capacity with 32 trays: approx. 84 m2, each tray is approx. 2.64 m2 - Electronic volume measuring system in 25 mm grid - An access opening with sliding doors to protect people and stored goods - Control C2000 with graphic display OP-C2000 B/W - LED anti-glare lighting above access point - Use of toothed belt for minimum noise - Use of toothed belt for fastest order picking - Distances can be realized in steps of 25 mm by arranging the support profile, a prerequisite for high compression storage - Automatic full tray extraction table Price: On request, via email only Price: excl. VAT, including transport and installation Delivery time: in stock Machinehandel De Leeuw BV specializes in used machines and accessories for the metalworking industry and used paternoster systems from, among others, Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Condition: good (used), Year of construction: 2004, IXION AUERBACH IA2 TLF-1200.4 Year of manufacture: 2004 Factory overhauled: 2023 CNC control: HEIDENHAIN 430M Travel X (table, longitudinal): 1,200 mm Travel Y (deep hole drilling-milling unit, vertical): 1,200 mm Travel Z (turret, horizontal): 700 mm Travel W (deep hole drilling-milling unit, horizontal): 1,200 mm A-axis (swivel of deep hole drilling-milling unit): +25°/-15° B-axis (NC rotary table): 360° NC rotary table with 5 T-slots: 1,000 x 1,000 mm Max. workpiece weight: 7,000 kg Rated drive power (S1 / S6): 12 / 18.5 kW Torque: 115 Nm Speed range: 60 - 6,000 rpm Max. drilling depth (in one pass): 1,200 mm (with 2 traveling steady rests) High-pressure coolant system for deep hole drilling oil: 100 bar & 42 l/min Tool changer for 24 tools With spindle air blast Max. tool length: 300 mm Max. tool weight: 3.5 kg Tool diameter Without adjacent free space: max. 90.0 mm With adjacent free space: max. 160.0 mm Equipment inside work area: - Fully enclosed working area with roof Fpjdpjydmuusfx Ahljk - Oil mist extraction - Chip conveyor Required floor space: 5,150 x 5,350 x 4,020 mm

Condition: used, Chiron FZ18W Magnum rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm Fpsdpfx Ahshkkwbolek 20 tools ISO 40 / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor 6 ton 3,6 x 2,25 x 2,85 machine can be inspected under power in our warehouse Mimu Machine Tools (Italy)

Year of construction: 2020, condition: as good as new (ex-display), electrode diameter 0,5 to 3mm travels 300x400x350mm ) CE-cretification verifies the best possible safty Fpsdpfx Ahef Hmn Aolek all Machines in over-floor construction Elektrode Ø 0,5-3mm Travel X-Axis 300mm Travel Y-Axis 400mm Travel Z-Axis 350mm Travel W-Axis 300mm Speed W Axis 30-60mm/min Rapid feed Z-Axis 120mm/min removal rate (max.) 300:1 Table dimension 320x440mm max.generator capacity 30A

Condition: used, Year of construction: 2010, operating hours: 26,827 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed length X-axis: 2,600 mm, feed length Y-axis: 700 mm, feed length Z-axis: 700 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, nominal power (apparent): 42 kVA, controller manufacturer: Siemens, controller model: 840 D SL Operate, workpiece weight (max.): 6 kg, total height: 2,800 mm, total length: 7,000 mm, total width: 5,000 mm, table width: 700 mm, table length: 2,900 mm, table load: 2,150 kg, rotational speed (max.): 8,000 rpm, overall weight: 14,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 8,280 h, spindle motor power: 23,500 W, spindle nose: SK 40, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: chip conveyor, We are offering this used Deckel Maho DMF 260 / 700 vertical machining center, year of manufacture 2010. X-axis travel: 2,600 mm Y-axis travel: 700 mm Z-axis travel: 700 mm CNC control: Siemens 840 D SL Operate Main spindle: Spindle speed range: 8,000 rpm Main spindle drive power: 23.5 kW Tool holder: SK 40 Fpsdpfx Ahoytruxeljk Worktable: Clamping surface: 2,900 x 700 mm Max. table load: 2,150 kg Tool magazine: Number of tool pockets: 30 positions Tool holder: SK 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent pocket: 130 mm Max. tool length: 300 mm Max. tool weight: 6.0 kg Feed rates: Rapid traverse (X / Y / Z): 40 m/min Max. feed rate: 40,000 mm/min Max. feed force: 8 kN Total power requirement: 42 kVA Machine weight approx.: 14.5 t Space requirements approx.: 7.0 x 5.0 x 2.8 m Chip conveyor Coolant system High-pressure cooling Internal coolant supply Paper band filter 2x rotary windows Tool magazine, 30 positions Probe Operation mode 4 Prepared for a 4th axis At approx. 7,500 spindle hours, the X-axis and tool changer were overhauled. If you have any questions or require further information, feel free to send us a message or give us a call. Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in the technical data and specifications, and subject to prior sale!