Column-Mounted Crane

DEMAG PK1 N-F - Capacity 125 kg

Condition: excellent (used), Year of construction: 2018, operating hours: 100 h, We specialize in the remanufacturing of blowers, compressors, and vacuum pumps. We service equipment from manufacturers such as: Aerzen, Kaeser, Atlas Copco, Robuschi, Busch, and Tuthill. We also offer blowers and compressors for rental. We operate throughout Europe and beyond. Hsdpfx Aon Tntqocvok

Condition: used, Year of construction: 1990, No. 04502 Veneer press Ott JU 2511/70 Used, year of construction 1990 Electro-hydraulic, approx. 15 kW Aluminum heating plates 2550 x 1100 mm LW Heating electric 4 hydraulic cylinders each 80 mm diameter Total pressing pressure 70 tons Specific pressing pressure 2.5 - 3.5 kg/cm2 Opening width 400 mm Hedpjxwp S Iofx Acvjk Button control for opening - closing - stop Pressure monitoring with automatic readjustment Adjustable limit switch for specific opening width HAWE pump Safety rip cord Incl. electric cable and plug 32 A Incl. electric plans, operating instructions as .pdf file Transport dimensions approx. 2900 x 1400 x 2000 mm LWH Weight approx. 3000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 alternate top bevel teeth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Measurement readout for: - horizontal cuts: via scale and strip cutting stop - vertical cuts: via scale from 0 - 1,300 mm Extraction port: 100 mm 5 material support rollers per meter of cutting length 1 infeed and 1 outfeed roller Pneumatic workpiece clamping device between the support rollers 1 central support element per meter of cutting length Twist-resistant, freestanding machine frame Pneumatically retracting slatted frame Round bar guide vertical and horizontal Fine-adjustable folding stop Fine adjustment for horizontal cuts via handwheel Strip cutting stop Manual programming rail with 5 T-nuts Pneumatic plunge of the saw unit Pneumatic saw head lock Hodpfx Acswka Ntsvsk Control unit at the saw assembly: start button, stop button Operator panel with template holder Electronic digital display for the saw unit Electronic digital display for the folding stop Automatically swiveling saw head Location: Flörsheim Availability: short-term

Condition: used, functionality: fully functional, overall weight: 310 kg, Weight: 310 kg Dimensions: 900x700x1550(h) mm Hjdpfx Asx I Rdiocvek Motor power: 3 kW Solid square: 20x20 mm Solid round: 20 mm diameter Handrail: 60x12 mm

Condition: as good as new (ex-display), A demonstration double miter metal cold circular saw with 350mm circular saw blade Cutting range round/rectangle 90° 120/ 140x100 mm round/rectangle 45° right and left 100/ 100x100 mm speed 18/ 36 m/min Further tech. Data see pdf. Document Hjdpfxepgmnge Acvsk Tech. Data and dimensions Errors excepted

Condition: used, Year of construction: 2025, operating hours: 1 h, Operating hours: 1 _____ New tractor with dealer’s day registration prior to handover Standard equipment / technical data Engine Rated power (ISO) 82 / 110 kW/hp at 2200 rpm Max. power 86 / 115 kW/hp at 2000 rpm Max. torque 460 Nm at 1600 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4-cylinder / 4.4 l, 4V, STAGE 5 Regulated turbocharger, SCR catalyst DOC – Diesel oxidation catalyst SC particulate filter One-piece tilting engine hood Exhaust outlet right side in front of the cab Fuel tank capacity 198 liters / AdBlue 18 liters Transmission / PTO 16/16-speed Dyna-4, SpeedMatching, 40 km/h PowerControl operation left with powershuttle, 4-step powershift Permanently cooled wet plate clutches with independent lubrication system 2-speed selectable PTO: 540 / 540E / 1000 Switchable electrically in the cabin PTO START/STOP button on the rear left fender Hydraulics / Rear linkage Open-center system 58 l/min total flow rate, max. 200 bar 2 control valves with hydraulic couplers: 1x single/double-acting, MR + 1x single/double-acting, NL, SST Quick couplers Cat. 3 with balls and catch bowls Cat. 3/2 Lower link sensing 5,200 daN max. lift capacity, 2 external lifting cylinders Adjustable stabilizers on both sides and 2 side stabilizers EHR with external control on both fenders Electrical equipment Thermostart, 120 A alternator Electric battery isolator Power supply (12 Volt) for external devices with plug Axles / additional weights Rear axle ND with flange hub Oil-cooled disc brakes Quick-adjust automatic hitch Rear fender outside width 2.00 m, without extensions Front weight carrier with integrated towing device and towing pin Operator’s area Low-vibration mounted standard cab with standard roof, ventilation and heating, air conditioning Integrated safety frame with tinted glazing Doors with safety steps on both sides Adjustable steering column (height and angle) Air-suspended driver’s seat with armrests, swivel adapter, seat belt 2 large telescopic external & wide-angle mirrors Interior mirror Analog-digital dashboard (SIS) Radio pre-installed with antenna and speakers 4 work lights each front and rear on cab roof 2 headlights each in the engine hood and on handrails, 2 rear work lights on fenders Rear window wiper and washer All-wheel drive front axle with switchable differential lock Special equipment Includes fuel tank guard PowerControl & brake-to-neutral (clutch effect) 100 l/min, open center hydraulic system with combined oil flow (58+42 l/min) Leakage oil collector at quick couplers 3 control valves: 1x MR, double-acting, EA, SST + 1x double-acting, NL, SST + 1x double-acting, NL, SST + free return 2.5 t front linkage, 1 hydraulic line set, electric socket 480/70R38 ADJ Ø1.69m & 380/70R28 ADJ Wide rear mudguard extensions Air conditioning Cab with mechanical suspension Telescopic external & wide-angle mirrors Passenger/instructor seat with belt Air-suspended driver’s seat, automatic adjustment with seat belt, swivel adapter & armrests Rear window wiper and washer Automatic battery isolator, 12 Hjdpfxsyvmq Ie Acvsk

Condition: ready for operation (used), Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting range at 90° rectangular: 90 x 90 mm Cutting range in mitre at 45° rectangle: approx. 40 x 120 mm Hodjl Ra Uiepfx Acvsk Saw blade speed: 33/66 upm Drive motor: 380 V, approx. 1.3 kW Required space: 850 x 600 x 1600 mm

Condition: excellent (used), Panel saw STRIEBIG COMPACT TRK 5207 C - used - Welded frame with extremely high rigidity, automatically retracting support grid, stable locking of the saw carriage at top and bottom, control panel at eye level ----- Technical data ----- Cutting length: 4,600 mm Cutting height: 2,070 mm Cutting depth: 60 mm Saw blade diameter: 250 mm Motor: 3 kW Extraction connection diameter: 100 mm Required space (LxWxH): 5,716 x 1,500 x 2,814 mm Weight: 850 kg Quality information: - Folding support rails renewed - Fence bars renewed / overhauled - Complete basic inspection performed - Complete basic cleaning - Electrical system checked - Immediately ready for operation Hjdpfx Aowyap Eecvok

Condition: used, pressing force: 65 t, table width: 1,100 mm, table length: 2,200 mm, total length: 2,600 mm, total width: 1,300 mm, total height: 2,000 mm, overall weight: 2,800 kg, empty load weight: 2,800 kg, cylinder diameter: 80 mm, opening width: 300 mm, plate width: 1,100 mm, space requirement height: 2,000 mm, space requirement length: 2,600 mm, space requirement width: 1,300 mm, transport length: 2,600 mm, transport width: 1,300 mm, transport height: 2,000 mm, No. 04486 Veneer press Ott JU 60 Used Hodpfx Aceyfw D Asvok Heating plates 2200 x 1100 mm LW Plates gold anodized, in very good condition Electric heating 2x 6 kW 4 hydraulic cylinders, diameter 80 mm each Total pressing pressure 65 tons Specific pressing pressure at full capacity 2.7 kg/cm2 Opening width 300 mm Button control for close - open - stop Circumferential emergency stop safety pull cord Transport dimensions approx. 2600 x 1300 x 2000 mm LWH Weight approx. 2800 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2015, Technical details: Hedpeu Nvmqsfx Acvek lifting capacity: 0,8 t span width: 4375 mm Arm length: 4375 bis Kranhaken mm height lower edge cantilever arm: 3660 mm cantilever arm length from center column: 4650 mm lifting height max. hook position: 3300 mm column diameter: 410 mm rotation: momentan ca. 100° begrenzt ° total power requirement: 1,8 kW The pillar-mounted slewing jib crane consists of the following main groups: Boom Hoist: Vetter chain hoist type SICH6BF, lifting height 2000mm, hook Ø 43mm with rope safety device; load chain type 7 x 20 double chain Support column H: 4000mm with flange Ø 610mm Crane control via pendant control Beam Manual operation (slewing) Chain hoist on beam *