Tool milling machine

Deckel FP2 Aktiv Zubehörschrank

Condition: excellent (used), Year of construction: 2008, Beam on: 21,660 h Laser on: 42,130 h Bodpfx Ajxfim Iskaedb

Condition: new, Year of construction: 2023, Working width: 1100 mm Minimum workpiece height: 4 mm Maximum workpiece height: 170 mm Height adjustment: electronic Workpiece thickness display: digital Number of units: 2 1st unit: Helically grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off for the roller 2nd unit: Combination unit with finely adjustable working height for calibration and fine sanding: rubber-coated roller Ø 120 mm (45 Sh), hard sanding shoe with graphite coating on an interchangeable insert and pneumatic on/off of the roller Segmented sanding shoe: elastic, sector spacing 56 Control system: FOX 500 KTR Dust removal brush: no Motor power: 15 kW Extraction connection: 2 x 140 mm Bodpfx Aeirmg Ujkajdb Machine length: 1650 mm Machine width: 1820 mm Machine height: 1960 mm Weight: 1170 kg

Condition: new, Year of construction: 2025, Pre-milling unit: yes Pre-milling material removal: 0 - 2 mm Plastic edges: 0.4 - 3 mm Solid wood edges: 0.5 - 5 mm Workpiece thickness: 8 - 50 mm Bedpfjl D Rx Ujx Akajdb Minimum workpiece length: 120 mm Minimum workpiece width: 110 mm Anti-adhesive spray unit: yes Edge preheating device: yes Glue application unit: Granulate / quick-change glue tank kit End trimming unit: yes Flush end trimming unit: yes Corner rounding unit: yes Flush radius trimming unit: yes Radius scraper unit: yes Flat scraper unit: yes Buffing unit: yes Cleaning spray unit: yes Power consumption: 5 kW Machine length: 3,774 mm Machine width: 1,546 mm Machine height: 1,337 mm Weight: 842 kg

Condition: new, Year of construction: 2024, Working width: 950 mm Workpiece height min: 4 mm Workpiece height max: 170 mm Height adjustment: electronic Workpiece thickness display: digital Control system: Fox 500 KTR Units: 1 1st unit: Combination unit for calibration and sanding / Helically grooved steel roller Ø 120 mm with fine height adjustment / Hard sanding pad with graphite lining Deburring brush: no Motor power: 7.5 kW Extraction port: 140 mm Bodpfx Akoknyhleaodb Machine length: 1388 mm Machine width: 1545 mm Machine height: 1668 mm Weight: 660 kg

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 208901, grinding length: 2,040 mm, grinding width: 700 mm, total height: 2,600 mm, total length: 6,000 mm, total width: 2,900 mm, distance table to spindle center: 600 mm, table load: 1,300 kg, overall weight: 7,500 kg, SAEILO KENT KGS-715 WM 2 Surface Grinding Machine - Operating voltage: 400 V - Frequency: 50 Hz - Connection: 12.3 kW - Minimum distance from table to spindle center: 120 mm - Separate hydraulic unit to prevent thermal changes in the machine - Infinitely variable longitudinal and cross table motion with automatic table reversal - Rapid vertical adjustment for the grinding head: 300 mm/min (rapid traverse) - Electronic handwheel for precise manual vertical and crossfeed - Adjustable magnetic chuck with clamping force monitoring - Magnetic chuck dimensions: 1500 x 720 mm - Automatic central lubrication with visual inspection - Side chip and splash guards - Grinding wheel dimensions: 355 x 50.8 x 127 mm - Highly precise positioning (cross axis reversal accuracy of 0.02 mm via servo motor) - Including matching workshop cabinet with various grinding wheels Bedoyuvvcopfx Akajdb Attention: The item must be collected definitively between 05 and 07 May 2026 on a date yet to be agreed. FCA D-74385 Pleidelsheim – loaded onto truck

Condition: excellent (used), Year of construction: 2018, operating hours: 241 h, functionality: fully functional, machine/vehicle number: Maschinen-Nr. 8914, working range: 4,250 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 1,000 kg, type of input current: three-phase, input voltage: 400 V, table length: 4,650 mm, table width: 2,050 mm, pressure: 4,150 bar, travel speed (max.): 40,000 mm/min, table load: 1,000 kg, total height: 3,800 mm, total length: 6,700 mm, total width: 3,000 mm, compressed air connection: 8 bar, pump pressure: 4,150 bar, overall weight: 4,500 kg, product height (max.): 350 mm, power: 30 kW (40.79 HP), We are offering this very well-maintained CMS brembana idroline S waterjet cutting machine, year of manufacture 2018, for immediate sale. This is a rare opportunity to acquire a machine with very low operating hours—only 241 hours!—and in excellent condition. If you are looking for a robust, reliable, and precision machine, this model comes with a 5-axis head, Easy-Stone software, and a 15" TFT color display with membrane keyboard. It features the CMS Powder Free system, with guides protected against water and dust [rack and sliding guides are protected within the structure by a labyrinth seal]. The bridge design includes gantry drive, allowing workpiece supports up to 1000 kg/m². The machine weighs approximately 4,500 kg (without water). Equipped with lift doors on both the front and rear, ensuring no splashing water or abrasive sand ends up on the workshop floor. Sand is removed from the water tank via a chain conveyor. Abrasive material feeder for up to 330 kg of abrasive. The tank holds 8,000 liters of water. High-performance Greenjet EVO pump, 4150 bar / 30 kW / 40 HP / 400 V ±5%, 50–60 Hz. Manufacturer: CMS Model: brembana idroline S Year: 2018 Bedpfx Aksyti Iisaedb Machine type: Waterjet cutting machine If you have any questions or would like more information, please feel free to contact us by message or phone.

Condition: ready for operation (used), Stama MC 734 MT (Machine number 5) Bsdpfx Akevw Supsajdb Tool magazine: 48 tools on chain, plus 90 tools in the auxiliary magazine Milling spindle: 12,000 rpm Tool holder: Capto C6 Control unit: Fanuc Series 31i-Model A5 Chip conveyor Operating hours: approx. 48,974 h Machining time: 19,357 h Travels: X: 800 mm, Y: 520 mm, Z: 510 mm Rapid traverse: 60 m/min Clara extraction system not included in the scope of delivery! More photos available upon request. You will receive a proper invoice. For foreign customers, a net invoice can be issued. A valid VAT ID number is required. Subject to prior sale. The stated company names and trademarks are the property of their respective owners and are used only for identification and description of the products. Technical data deviations and errors in the item description are possible and subject to change.

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,800 mm, total length: 7,000 mm, total width: 4,000 mm, table width: 635 mm, overall weight: 11,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 36, tool length: 340 mm, tool diameter: 70 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: Heidenhain iTNC 530 Travel X [mm]: 2,000 Travel Y [mm]: 600 Travel Z [mm]: 800 Installation dimensions LxWxH (mm): approx. 7,500 x 4,500 x 3,100 mm Weight (kg): approx. 11,000 Spindle: Max. speed: 10,000 rpm Max. drive power: 16 kW at 40% duty cycle Max. torque: 80 Nm at 40% duty cycle Tool holder: SK40 CNC Swivel Head: Swivel range: +/- 105° Selectable: either continuous or indexable with clamping General: Direct position measuring system on X/Z/Y axes Tool magazine with 36 stations Electrical connection: 400V/3Ph/50Hz Connected load: approx. 55 kW Compressed air connection: 6-8 bar Bdedpfx Akoy Aw Rxeasb Equipment / Accessories: Rotary table as shown Electronic handwheel Chip conveyor

Condition: good (used), Year of construction: 2008, machine/vehicle number: B0702A0036, functionality: fully functional, stroke length: 110 mm, total length: 1,600 mm, total width: 1,300 mm, total height: 2,300 mm, overall weight: 2,600 kg, controller manufacturer: TRUMPF, TRUMPF TRUBEND 7036 Electromechanical Press Brake - Operating voltage: 3 x 400 V - Frequency: 50 Hz - Rated current: 8.7 A - Connection rating: 6.0 kVA - Press force: max. 360 kN - Stroke: max. 110 mm - Overrun time: max. 90 ms - Overrun distance at 220 mm/s: max. 12 mm - Safety distance: min. 180 mm - Control: TRUMPF - Includes: selection of various press brake tools in different sizes - Machine hours: see photos Bdsdpfx Aoy H Ei Rekaeb Attention: The item must be collected definitively between 15.06. and 25.06.2026 on a date to be arranged. FCA D-95126 Schwarzenbach an der Saale – loaded onto truck

Condition: good (used), Year of construction: 2002, The machine is in good condition, equipped with Fanuc Series 16i-T control and FMB Turbo 5-42 bar feeder. Bdsdpfxoy Eb N Do Akajb