Wide belt sanding machine

Casadei LIBRA 35/2 RTC 110

Condition: new, Year of construction: 2026, CASADEI Libra 35 - Wide belt sanding machines in a two-belt configuration immediately available - from stock in 54634 Bitburg Technical data Sanding width 1100 mm Min. / max. working height 4 / 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Feed speeds 4.5 / 9 m/min Feed motor 0.33/0.55 kW Motor power, table adjustment 0.25 kW Power of drive motor 11 kW Electrical voltage 400 V Phase(s) 3 phases Mains frequency 50 Hz Length 1650 mm Width/Depth 1820 mm Height 1960 mm Image shows optional equipment Wide belt sanding machine in a two-belt configuration up to 1100 mm with numerous optional features for cost-conscious workshops Robust, tubular reinforced monoblock steel machine body with work units mounted high up for maximum rigidity User-friendly due to clear control panel on the front Motorized table height adjustment Digital display for the working height Electronically controlled sanding belt oscillation with reduced compressed air consumption Automatic star-delta start for the main motor Natural rubber feed belt with a negative profile Support table with two rollers at the infeed and outfeed of the feed belt Belt feed via geared motor with two speeds Podpfxecr S Ecs Akiorc Flexible steel pressure bar in front of the first unit Rubber pressure rollers, before and behind each work unit Pneumatic belt tension per unit with decimal correction option for grain size/belt thickness Quality - Made in Europe RTC version 1st unit with grooved steel roller Ø 120 mm and fine adjustment for calibration 2nd unit Combination unit with finely adjustable working height for calibration and fine sanding with rubber-coated roller Ø 120 mm (45 Sh) and hard sanding shoe with graphite coating on a replaceable insert Scope of delivery: Work table height adjustment with electronic display of the working height Oscillation of the sanding belts with an electronic system Rubber-coated, grooved pressure roller at the infeed, 1° position with anti-rollback protection (C.E.) Star-delta start of the main motors Grooved calibration steel roller Selector switch for positioning the sanding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic belt centering Location: From stock in Bitburg - at a special price

Condition: used, machine/vehicle number: 007984, Max. machining width: 1300 mm Min. machining thickness: 4 mm Working Table: Fixed pass height Vacuum feed belt: yes Prodpfx Ajwqdbmjkijc No. Operating units: 4 Nr

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Prsdpfx Akjw Naanjioc MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. The features - In a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size.

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 5 mm to 300 mm Minimum workpiece length: 250 mm Units: 2 1. Saw cutting unit Random System: Saw cut appearance Pjdoupy Spjpfx Akierc 2. Brush: Tynex, diameter 210 mm Height adjustment: electric Height display: digital Feed speed: 4 - 14 m/min Motor power saw unit: 1.1 kW Motor power brush: 4 kW Motor power feed: 0.37 kW Machine length: 1400 mm Machine width: 1500 mm Machine height: 1600 mm Weight: 700 kg

Condition: new, Technical data: Working width: 970 mm Grinding width: 950 mm Working height: 3 - 160 mm 1 steel aggregate 2 combination unit with shoe The shoe is pneumatically pressed Sanding belt dimensions: 970 x 2150 mm Common motor power of 2 grinding aggregates: 11 kW The speed of the feeding belt on the converter: 16-18 m / sec. Predpsg A D Ansfx Akisc Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roll diameter: 150 mm Sanding pad width: 50 mm Sanding belt speed: 18 m / s 1 unit Compressed air consumption: 20l / min Standard equipment: Mechanical oscillation of the sanding belt without the use of compressed air. ECO GEAR SYSTEM Smooth regulation of the feeding belt on the converter 4-20m / min Automatic star / delta start Steel roller on the first aggregate, rubberized on KOMBI agragata Electronic table height display Automatic reading device for gr. material and table position setting Safety switches Automatic machine switches Main engine brake Rubber pressure rollers 2-roller table at the entrance and exit In stock! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Condition: as good as new (ex-display), Year of construction: 2026, Compact wide-belt sanding machine with combination sanding unit Promotional features: - Switching the sanding pad on and off from the control panel - Switching the roller on and off from the control panel - Electronic control system Fox 500 KTR - Table extension with 2 rollers, with infeed and outfeed - Automatic table positioning with push button Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes a diagonally grooved steel roller, Ø 120 mm, for calibrating Fine adjustment of the working height Clear control panel on the front Robust, tubular-reinforced monoblock steel machine body, robot-welded, with work units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via geared motor with two speeds Natural rubber feed carpet with a negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers, in front of or behind each work unit Pneumatic belt tensioning per unit with decimal correction option for grit size/belt thickness Universally applicable for solid wood and veneer thanks to the combination unit Entry-level model for smaller companies Working width 950 mm Equipment details: Combination unit for calibrating and sanding Prodpogf Sw Njfx Akioc Diagonally grooved steel roller, Ø 120 mm, with fine height adjustment Hard sanding pad with graphite pad Universal design for calibrating and sanding solid wood, chipboard and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/Depth (product) approx. 1545 mm Connection for dust extraction Dust extraction nozzle diameter 140 mm Electrical data Connection voltage 400V Current type AC Phase(s) 3Ph Mains frequency 50Hz Power feed motor 0.33 / 0.55 kW Power height adjustment motor 0.25 kW Power drive motor 7.5 kW Sanding unit Sanding belt length 1525 mm Sanding width max. 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Workpiece height min. 4 mm Workpiece height max. 170 mm

Condition: used, Year of construction: 2021, - Grinding width: 1100 mm - Grinding height: 3 - 170 mm - Grinding length: 1900 mm Wide-belt sanding machine Manufacturer: Felder Type: FW 1102 P Year of manufacture: 2021 Technical data - Contact roller unit - Fine sanding with segmented, electro-pneumatic sanding shoe, 25 mm segment width - Touchscreen color display 7" - Digital grit adjustment - Vacuum table incl. blower in the machine frame - Stepless feed speed 2.5 - 18 m/min, controllable from the touchscreen - Grinding width: 1100 mm - Grinding height: 3 - 170 mm - Grinding length: 1900 mm Note: Prjdozuzcmopfx Akisc The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2007, overall weight: 1,550 kg, cutting speed: 2,800,000 mm/min, Circular Metal Saw manufactured in 2007. This FomIndustrie Blitz Alva 450/500 ABC features a blade diameter of 450 mm, allowing for precise miter cuts. With a tool speed of 2800 RPM, it is designed for high-speed cutting across various materials. The robust construction ensures stability and longevity, making it ideal for heavy-duty industrial environments. Consider the opportunity to buy this FomIndustrie Blitz Alva 450/500 ABC Circular Metal Saw. Contact us for further details. Prjdpfxeyhfm Do Akisc • Blade diameter: 450 mm • Blade bore: 32 mm • Cutting capability: double miter (left and right) • Build: heavy-duty, solid construction for high stability and precise results • Condition (as stated by owner): low operating hours; regularly serviced; maintained in excellent condition • Application: suitable for workshops, assembly lines, and heavy-duty industrial environments

Condition: good (used), Year of construction: 2000, Schroeder Mosaic Press 160mm. Gluing patterns - brick / English pattern plate 640x274mm and halves 640x137mm glued in 6 variants: Peder Iyvbopfx Akisrc - single brick offset 50% - double brick offset 50 % - triple brick offset 50 % - single brick offset 25 % - double brick offset 25 % - triple brick offset 25 %

Condition: used, Year of construction: 2011, controller manufacturer: Siemens, controller model: C200-4D SL, _____ Description: Year of manuf. : 2011 Control : Siemens C200-4D SL In General: Year of construction:2011 Control system:Siemens 840 Dsl (C200-4D SL) Bar capacity:65 mm Milling spindles:18,000 rpm Main spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° Prodpfxey Sq T So Akisc Z-axis:390 mm Bar capacity:65 mm Clamping cylinder:Hollow clamping cylinder Chuck:3-jaw chuck Sub spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° X-axis:600 mm Z-axis:390 mm Bar capacity:65 mm Chuck:3-jaw chuck Tool carrier I: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 X-axis:350 mm Y-axis:160 mm (+/- 80 mm) B-axis:230° Tool carrier II: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 Y-axis:160 mm(+/- 80 mm) B-axis:230° Tool magazin: Technology:Chain magazine Number of stations:80 pieces Tool changer:Double gripper Tool length max.:180 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system with filter Parts removal:Gantry-type pick-up