DECKEL MAHO DMU 50 eVolution

DECKEL MAHO DMU 50 eVolution

Condition: used, Year of construction: 2000, Deckel Maho DMU 50 eVolution 5-Axis Universal Milling Machine Condition: Used Year of manufacture: 2000 Technical Data Travel: X/Y/Z 500 mm / 420 mm / 380 mm Main spindle: Speed up to 18,000 rpm Power (40% duty cycle) approx. 15 kW to 35 kW (depending on spindle version) Tool holder: HSK-E 50 NC swiveling rotary table: Clamping surface Ø 500 x 380 mm Swivel range (B axis) 0° to 180° Rotary range (C axis) 360° Max. table load: 200 kg Iodjyr Safopfx Am Iotf Tool changer: 60 stations Feed rate: up to 20,000 mm/min Rapid traverse (X/Y/Z): up to 50 m/min Equipment Control: Heidenhain Measuring systems: Direct position measuring systems in all axes Accessories: Chip conveyor, internal coolant supply Weight: approx. 5,500 kg to 6,000 kg Installation area with peripherals: approx. 5.4 x 4.7 m

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Iodpfexdc Uvex Am Ijtf

Condition: good (used), Year of construction: 2004, functionality: fully functional, operating hours: 39,000 h, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, total height: 5,600 mm, total length: 9,000 mm, overall weight: 6,000 kg, controller model: Heidenhain Mill Plus IT, For sale is a 5 axis machining center of the Makre DMU and type 50 eVolution Please note the GMN high frequency spindle spindle HCS 30.000 /15 and the 92-fold tool changer The machine is in good condition and fully functional Technical data Year of construction: 2004 Operating hours: approx. 39,000 h Control system: Heidenhain MillPlus IT Table size: approx 500 mm ⌀ Traverse paths: X-axis: 500 mm Y-axis: 420 mm Z-axis: 380 mm Itodpfjtyit Ejx Am Isf A-axis: 0-180° C-axis: 360 ° Tool holder: HSK 50 Spindle speeds: max: 30,000 1/min Frequency: 500 Hz Power: 15 kW Tool places: 92 NO chip conveyor Space requirement according to drawing: 9,000*5,600 mm Transport dimensions: 2,800*3,700*2,800 mm Weight: 6,000 kg On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Fzho0bc Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: good (used), Year of construction: 2000, operating hours: 53,776 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, rotary table diameter: 500 mm, rotational speed (max.): 18,000 rpm, For sale is a 5-axis simultaneous milling machine from Deckel Maho, model DMU 50 eVolution. The machine is in good condition and ready for immediate use. Itsdpfx Aowxd Agjm Iof Technical Data: Year of manufacture: 2000 Control: MillPlus Power-on hours: 53,776 h Spindle hours: 18,512 h X-axis: 500 mm Y-axis: 400 mm Z-axis: 380 mm B-axis: 0-180° C-axis: 360° Clamping surface: Ø 500 mm Max. table load: 200 kg Spindle taper: SK40 Max. speed: 18,000 rpm Spindle power: approx. 15 kW Tool magazine: 60 slots Dimensions: approx. 3,400 x 2,400 x 2,500 mm Weight: 5,500 kg Transport and loading can be arranged Europe-wide at an additional cost upon request. Prices are subject to VAT. Viewing possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell your equipment? For further information or contact options, please visit our website.

Condition: used, Year of construction: 2013, turning diameter . mm turning length 2000 mm control Siemens 840 D sl mainspindle: turning speed max. 3800 1/min mainspindle: torque max. 1200 Nm diameter of quill 140 mm center point MK6 quill power 5 - 30 kN feed rate Z-axis mm/min Iedpfx Ajvu E R Sem Ietf rapid traverse Z-axis 40 m/min feed rate X-axis - mm/min rapid traverse X-axis 25 m/min total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the production plant. The condition of the machine is good, the accuracy during turning operation is very good. The milling drive is not functional. A quotation from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest.

Condition: good (used), Year of construction: 2000, Hello I have for sale a 5 axis CNC milling center DECKEL MAHO DMU 50 V evolution. The machine is connected and working. _ Itsdott Ntfepfx Am Ief Type: 5 axis milling center Manufacturer: DMG DECKEL MAHO Model: DMU 50 V evolution Control: HEIDENHAIN TNC430 Country of manufacture: Germany Year of manufacture: 2000 _ Machine parameters: - number of axes: 5 - working table dimensions (length x width): 500 x 380 mm - maximum spindle speed: 18,000 rpm - spindle power: 15 kW - X/Y/Z axis travel: 500/420/380 mm - C/B axis travel: 180/360 degrees - maximum feed rate: 20 m/min - total power: 40 kVa - machine dimensions (L x W x H): 2800 x 2300 x 2600 mm - total weight: 6000 kg

Condition: good (used), Year of construction: 2001, MACHINE SPECIFICATIONS Control: Iedpfx Amoxq Hb Tj Iotf HEIDENHAIN Machining area: X axis: 500 mm Y axis: 420 mm Z axis: 380 mm Main drive: Speed range: 20 – 18,000 rpm Power (40/100% ED): 35/25 kW Torque (40/100% ED): 130/87 Nm Feeds: Working feeds (X/Y/Z): 20-20,000 mm/min Rapid traverse (X/Y/Z): 50 m/min Work table (B+C axes): Table dimensions: Ø 500 x 380 mm Maximum weight on table: 200 Kg T-slots (Number / Size / Tolerance): 7 / 14 mm / H7 C-axis travel: 360º (resol. 0.001º) B-axis travel: 180º (resol. 0.001º) Machine: Machine dimensions (LxWxH): 2,683 x 5,353 x 2.470 mm Machine weight: 5.020 Kg Taper: Taper type: SK 40 (DIN 69871 A) Electrical connection: Phases | Frequency | Voltage | Power: 3N | PE~50-60Hz | 400/230V | 40 kW Accessories: Cooling fluid through the chuck Automatic tool changer: ATC-32 - Maximum tool weight / Maximum tool diameter: 6 Kg / 200 mm Chip evacuator Electronic handwheel: HR-410 High capacity cooling system: Interlit SUK-200-900 Equipped with Reninshaw probe interface: probe included

Condition: good (used), Year of construction: 2003, In good technical condition and in working order. Year of construction 2003. X-axis 350 mm. Y-axis 250 mm. Z-axis 256 mm. Workpiece length: 750 mm. Workpiece width: 550 mm. Workpiece height: 250 mm. Machine dimensions: L 1670 mm x W 2040 mm, H 2305 mm. Iedpou Tq Hwjfx Am Istf Machine weight approx. 2600 kg.

Condition: excellent (used), Year of construction: 2002, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece height (max.): 1,230 mm, workpiece diameter (max.): 1,250 mm, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, Heidenhain iTNC 530 control Ijdsw Ngipopfx Am Istf Tool changer for 60 tools Automatic head +180/-7° stepless HSK A63 Number of pallets: 2 pcs Pallet size: 1000*800 mm

Condition: new, Year of construction: 2018, NEW PRODUCT at a special price Tactile coordinate measuring machine from Innometrik Measuring range 1200 x 3000 x 1000 Maximum workpiece weight: 1000 Kg Accuracy MPEE: 2.2 + L / 350 (in μm) Scale resolution: 0.1 / 0.5 in μm - Air bearings on all axes Itsdsdyl H Njpfx Am Ijf Linear speed: 300mm / s Volumetric speed: 520 mm / s Touch probe: Renishaw Tp200 incl. 3 modules (SF, HF, LF) and probe changer 3 compartment Software: OptiCheck 4.5 & Virtual DMIS (separate partitions) Optionally Polyworks according to customer requirements -Incl. PC (Windows 7) Alternatively Windows 10 -Incl. 2 monitors -Incl. Mouse keyboard Picture: sister device