Machining Center - Vertical

DECKEL MAHO DMC 635 V

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: 15405034874, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 20 kVA, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, total height: 2,400 mm, total length: 2,500 mm, total width: 2,100 mm, table width: 560 mm, table length: 790 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 11,164 h, number of slots in tool magazine: 20, mount diameter: 40 mm, tool length: 300 mm, tool diameter: 80 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 35 A, feed force X-axis: 5,000 N, feed force Y-axis: 5,000 N, feed force Z-axis: 5,000 N, DECKEL MAHO DMC 635 V CNC Vertical Machining Center - Tool holder: SK 40 - Input resolution X/Y/Z: 0.01 mm - Path measuring system resolution X/Y/Z: 0.001 mm Cjdo Afulmspfx Ap Djhd - Positioning tolerance in X/Y/Z with indirect measuring system: 0.020 mm, with direct measuring system: 0.008 mm - Max. tool diameter: 80 mm without free spaces, with free spaces: 130 mm - Max. tool length from spindle nose: 300 mm - Max. tool weight with automatic tool changer: 6 kg - Distance between T-slots: 100 mm - Number of clamping slots: 4 Note: without the machine vices shown in the photos! Includes the SK 40 tool holders located in the tool changer, as well as a 3D measuring probe. Note: Spindle needs to be inspected! FCA D-71679 Asperg - loaded onto a truck.

Condition: used, Year of construction: 2007, Technical details: x-travel: 635 mm y-travel: 460 mm z-travel: 510 mm control: 3D Heidenhain i TNC 530 table-size: 790 x 560 mm table load capacity: 600 kg tool taper: SK 40 Revolution per minute: 20 - 10.000 U/min. tool changer with: 20 place spindle hours: 36.050 h operating hours - idle run: 91.000 h total power requirement: 13,9 kW Weight approx.: 3,6 t Chedjw A I Uuspfx Ap Djd tool taper: SK 40 Tool changer: 20-fach dimension machine approx.LxWxH: 3,0 x 2,0 x 2,15 m

Condition: good (used), Year of construction: 2007, functionality: fully functional, spindle speed (max.): 10,000 rpm, DECKEL MAHO DMC 635 V – Year of manufacture 2007 Technical data Manufacturer: DECKEL MAHO / DMG Model: DMC 635 V Year of manufacture: 2007 Machine type: Vertical CNC machining center Control system: Siemens Sinumerik 840D Axes: 3 (X / Y / Z) Working area: X-axis travel: 635 mm Y-axis travel: 510 mm Z-axis travel: 460 mm Table clamping area: 790 × 560 mm Max. table load: 600 kg Main spindle: Max. spindle speed: 10,000 rpm Tool holder: SK 40 Tool changer: Automatic tool changer Tool magazine: 20 positions (typical configuration) Equipment: CNC control system Siemens 840D Automatic tool changer Coolant system with external cooling No internal cooling (without coolant through the spindle) No chip conveyor Feed rate and rapid traverse: Rapid traverse X/Y/Z: 30 m/min Max. working feed rate: 20,000 mm/min Dimensions and weight: Machine weight: approx. 3,600 kg Installation dimensions: approx. 2,000 × 2,650 × 2,350 mm Total connected load: approx. 20 kVA Operating hours: approx. 24,000 Spindle hours: approx. 7,000 Images will follow. Codoz Symdjpfx Ap Dshd

Condition: good (used), Year of construction: 2011, Machine is in good working condition. Parts shown by hand not come. Csdpfx Apoz Nx Ubo Dshd

Condition: used, Year of construction: 2007, x-travel 635 mm y-travel 510 mm z-travel 460 mm control iTNC 530 Heidenhain power capacity - main spindel 13 / 9 kW turning speed range - main spindle 20 - 10.000 min/-1 Torque 83 / 57 Nm Chodpfoyaci Hox Ap Dsd tool taper SK 40 tension force 10 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min Feed force 5 kN input unit 0,01 mm rapid traverse 30 m/min total power requirement 20 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V - Spindle-Runtime only approx. 7.883h - Power-On approx. 23.023h

Condition: used, Year of construction: 2013, x-travel 635 mm y-travel 510 mm z-travel 460 mm control Sinumerik 840 D SL Siemens turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 83 / 57 Nm tension force 8 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - distance 100 mm T-slot - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg table height over floor 720 mm distance spindle nose and table 120 - 580 mm number of toolpositions 30 pos. Max. mould width 80 / (130) mm max. tool length 250 mm max. tool weight 6 kg max. total weight 80 kg change-time tool to tool 1,6 sec Csdpfoym Dz Rex Ap Dshd change-time chip to chip 6,0 sec rapid traverse 30 m/min feed speeds 1 - 20.000 mm/min Feed force max. 5 kN total power requirement 28 kVA weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 4,0 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 635 V New Design - ShopMill - WITHOUT perforated plate - WITHOUT clamping device - WITHOUT tools

Condition: ready for operation (used), Year of construction: 2009, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 635 mm Y-AXIS TRAVEL: 510 mm Z-AXIS TRAVEL: 460 mm RAPID FEEDS X-Y-Z: 30 m/min SPINDLE: 10000 rpm; 9 - 13 kW; 57 - 83 Nm; SK-40 TABLE SIZE: 790 x 560 mm MAX ADMITTED LOAD: 600 Kg TOOL MAGAZINE: BASKET-TYPE ; 20 POS MAX TOOL DIAMETER: 80 (130) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 6 Kg CONTROL UNIT: HEIDENHAIN iTNC 530 WEIGHT: 3650 Kg Chodezlu S Nspfx Ap Dsd OVERALL DIMENSIONS: 3375 x 2440 x 2665 mm ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL

Condition: good (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, Machine is being sold on behalf of the customer and can be inspected under power. Machine location: Czech Republic (Brno) Manufacturer: Deckel Maho Model: DMC 635V Year: 2007 Approx. 32,000 operating hours Control: Heidenhain iTNC 530 Spindle mounting: SK40 Speed: 10,000 rpm Travel (X/Y/Z): 635 / 510 / 460 mm Clamping surface (table): 790 x 560 mm 30-position tool changer Chedpjylmdfsfx Ap Dod + Blum laser tool measurement + Paper band filter / ICS 20 bar / 600 l + Chip conveyor Dimensions (approx.) LxWxH 260 x 390 x 240 cm Installation area 530 x 590 cm Weight: approx. 4,200 kg

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,641 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D powerline, table load: 600 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2008. It features a Siemens 840D control unit, a spindle speed of 10,000 rpm, and a tool changer with 20 positions. The machine offers a table size of 790 x 560 mm and a maximum table load of 600 kg. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information. Csdpfeyca I Sex Ap Dehd • Operating hours: 17,641 h • Table size: 790 x 560 mm • Rapid traverse: 30 m/min • Tool changer: 20 positions • Condition: Both machines are in good working condition Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,478 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D powerline, table load: 600 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It features a Siemens 840D control unit, a spindle speed of 10,000 rpm, and a tool changer with 20 positions. The table measures 790 x 560 mm with a maximum load of 600 kg. Rapid traverse rate is 30 m/min. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V vertical machining centre. Contact us for more information about this machine. • Operating hours: 19,478 h • Table size: 790 x 560 mm • Rapid traverse: 30 m/min • Tool changer: 20 positions • Condition: Both machines are in good working condition Codpfx Aeyca Npjp Dohd Technical Specification Taper Size SK 40