Plate rolling machine

DAVI MCB3028 4roll 3000x13 mm

Condition: new, Year of construction: 2024, 1050 mm 5.5 mm 5.0 mm roll diameter 130 / 195 mm 2.2 kW 1050 kg Nsdoq Sz Ahopfx Abyedc 2150 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, Maximum bending length: 6100 mm Bending force: 400 tons Motor power: 30 kW Voltage: 380 V Oil capacity: 400 liters Dimensions (L x W x H): 7750 x 2850 x 3400 mm Ndedpsyr N Rbjfx Abyec Weight: 31750 kg

Year of construction: 1998, condition: used, Speed: 12.5-2000/min, with documentation. An on-site inspection is possible. Nsdpfx Ajz Da I Rsbyodc

Condition: good (used), functionality: fully functional, Year of construction: 1998, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Simatic OP7, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 530 mm, side roll diameter: 400 mm, roller diameter: 530 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 2,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 65 mm, sheet thickness stainless steel (max.): 50 mm, overall weight: 40,000 kg, total length: 6,000 mm, total width: 2,900 mm, total height: 2,900 mm, power: 55 kW (74.78 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, plate bending roll capacity 3000x50 mm Davi modelMCB3053 Hydraulic 4 roll plate bending machine, year 1998 plate width 3000 mm thickness rolling 50 mm pre-bending 40 mm width on the rolls 3100 mm upper roll size 530 mm lower roll 470 mm side rolls 400 mm Power electric 70Hp on hydraulic unit voltage 380/50 - Installed configuration Hardened surface of the 4 rolls conical bending attachment – hardened cone bending Console electric with digital position readout of the rolls Controller Siemens Simatic OP7 NC programmer for automatic rolling Hydraulic power driven the central rolls with axial gearbox Pre-pinch pressure adjustable plate edge pre-bend. Drop-end open front for unloading closed shells Rerolling system for calibration roundness of welded shells. Safety and emergency system installed. Manuals original for operation and maintenance Nodpfey D Ngzjx Abyedc Dimension 6000x2900 x h 2900 mm weight 40000 kg

Condition: good (used), Year of construction: 2007, Manufacturer: Volz BMT Year of manufacture: 2007 Control: conventional with digital readout (DRO) Country of origin: Taiwan Ndodpex Uw S Hofx Abyec Swing diameter: 660 mm Max. turning length: 2000 mm Spindle bore: 85 mm Spindle mount: D1-8 Spindle motor: 7.5 kW Spindle speed: 17–1200 rpm with steady rest with digital readout (DRO) with thread cutting function

Condition: good (used), Year of construction: 1979, Single column vertical turning lathe BERTHIEZ TM500 SP Manufacturer: Berthiez (France) Model: TM500 SP Year of manufacture: 1979 Main technical data: Table diameter: 6300 mm Maximum turning diameter: 15000 mm Maximum usable height: 4000 mm Arm travel: 3600 mm Main motor power: 100KW Maximum allowable load on faceplate: 80 t Ram size: 360x360 mm Machine weight: approx. 230 tons The machine is capable of both turning and milling operations. Do not hesitate to contact us for any additional information. Nsdpfjx A U Rasx Abyodc

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Ndsdjv Iq Ezepfx Abyjc Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2010, Technical details: pressure: 80 t chamfer lenght: 2500 mm distance between columns: 2125 mm max. ram stroke: 200 mm plate thickness: 6 mm total power requirement: 9 kW operating pressure: 275 bar throat: 420 mm ajustment speed: 100 mm/s working feed: 10 mm/s weight of the machine ca.: 5,8 t Ndjdezpaqfopfx Abyjc dimensions of the machine ca.: 3,8 x 2,4 x 2,95 m NC pressbrake, controlled axis: Y1, Y2, X1, R with toolcabinet incl. accessories, barely used! *

Condition: used, Year of construction: 1978, turning diameter over bed 1450 mm turning diameter over slide rest 1000 mm turning length 8000 mm spindle bore 160 mm turning speeds 2,8-560 U/min faceplate 1400 mm bed width 850 mm turning diameter in the gap 1800 mm length of gap 600 mm steady 1070 mm steady 1070 mm steady 650 mm Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Ndsdsyqvwlspfx Abyoc than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), functionality: fully functional, Year of construction: 2015, Four-Roller Plate Rolling Machine Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Technical Specifications Brand: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Bottom roll diameter: 210 mm Side roll diameter: 165 mm Bending force against top roll: 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4,200 kg Performance Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 295 mm Ndsdpfx Abozguumjysc With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,125 mm With yield strength: 360 N/mm² Rolling capacity (full working width): 6.5 mm Pre-bending capacity (full working width): 5 mm From tube diameter: 295 mm With yield strength: 360 N/mm² Rolling capacity (half working width): 15 mm Pre-bending capacity (half working width): 10 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Equipment - Double linear guide system for roller movement - Extra wide bearing blocks - MCS double bearing system for roll rotation - Extra heavy-duty, doubly supported drop end bearing - Electronic parallelism system (EPS) - Hardened rolls for maximum wear protection and reduced sheet damage - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop and CE certification - Water cooler for hydraulic unit All details without guarantee. A live demonstration under power is possible at any time in our showroom.