Milling machine A30/40

Correa A 30/40

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 20 rpm, table length: 4,500 mm, total height: 3,400 mm, total width: 5,390 mm, total length: 11,100 mm, workpiece weight (max.): 9,000 kg, overall weight: 22,500 kg, spindle motor power: 22,000 W, spindle nose: ISO 50, Fixed-bed milling machine built by Nicolás Correa in 2002, fitted with a Heidenhain TNC 426 CNC control and electronic handwheel. Working table measuring 4,500 × 1,100 mm with eight T-slots, 22 mm wide and spaced approximately 125 mm apart. Maximum permissible table load of 9,000 kg. Axis travels of 4,000 mm in X, 1,250 mm in Y and 1,500 mm in Z. Rcsdpfx Alszw Hgvs Uef Universal milling head with manual positioning, hydraulic tool clamping and ISO 50 spindle taper. Main spindle rated at 22 kW with infinitely variable speed control across a range of 20 to 3,000 rpm. Cutting feed from 2 to 5,000 mm/min; rapid traverse of 15,000 mm/min on the X axis and 10,000 mm/min on the Y and Z axes. Compensation on the Y and Z axes, through-spindle coolant supply and provision for a fourth axis. The machine is supplied with a shared fourth axis, 400 mm in diameter. CE marked. Condition: axis movement is correct, with no unusual noise or vibration. Measured deviation of approximately 0.15 mm. The milling head is functional and shows slight play. The machine has been kept under basic maintenance and is in working industrial condition. Approximate weight between 22,500 and 24,000 kg. Approximate overall dimensions of 11,100 × 5,390 × 3,400 mm.

Condition: ready for operation (used), Year of construction: 2014, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis HAAS UMC-750 was manufactured in 2014. It features a 12000 rpm spindle, a 40+1 tool changer, through-spindle coolant at 21 bar, and a conveyor. High-speed machining capabilities are enhanced with programmable coolant and Dynamic Work Offsets/Tool Center Point Control. It also includes Renishaw probes and a robot interface. If you are looking to get high-quality milling capabilities consider the HAAS UMC-750 machine we have for sale. Contact us for more information about this machine. • Tool changer: 40+1 tools (CT as provided) • Through‑spindle coolant (TSC) 21 bar Rcodpfxsx Imtte Al Ujf • Air through spindle • High‑Speed Machining • Programmable coolant nozzle (P‑Cool) • DWO/TCPC • Auto Door • Side window • Top roof/enclosed top Additional equipment • Chip conveyor • Renishaw probes (probing system) • Robot interface

Condition: like new (used), Year of construction: 1992, Retrofitted: 2023 Numerical control: HEIDENHAIN TNC-320 Technical features Dimensions Table dimensions: 4500 x 1100 mmNumber of T slots: 8T slots dimensions: 22 mm Traverses of axis  X axis traverse: 4000 mmY axis traverse: 1200 mmZ axis traverse: 1250 mmVertical capacity (VC): 57 – 1307 mm Milling head Head type: Universal manual U22Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 2080)  /  Pull stud: DIN 69872Speed range: 20 - 2000 rpmSpindle power: 22 kW Feedrates Feedrate: 5 - 5000 mm/minRapid feedrate (X / Y,Z): 15000   /   10000 mm/min Weight and dimensions Maximum weight on table: 8000 kgMachine weight approx.: 23500 kgMachine dimensions approx.: 11100 x 5392 x 3400 mm Accessories Guarding: 2 sliding doors and new perimetral wire-mesh fence.Electronic handwheel: New HR-510Coolant: External Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Rodpfxeyf Rtkj Al Ujcf

Condition: used, length:1800 mm Rodpfxocxxu Do Al Uocf width:1200 mm weight of the machine ca.:1,6 t dimensions of the machine ca.:1,8 x 1,2 x 0,4 m

Condition: excellent (used), Year of construction: 2015, Traverses XYZ: 1020 x 540 x 510mm, Rcedpfx Alsylbpvo Uof table size 1200 x 540mm, ISO40 spindle taper, spindle speed 12000 rpm, Siemens 828D Control, spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: good (used), Technical condition: good Visual appearance: good Rodpfx Aljt Dluro Ujcf Please contact Ferdinand Pater for more information

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, Vertical machining center Manufacturer: DMG Type: DMU 160 P duoBLOCK Year of manufacture: 2007 Control system: Heidenhain ITNC 530 Axes: 5-axis simultaneous Travel distances X: 1600 mm Y: 1250 mm Z: 1000 mm Tool changer: 60 tool positions Spindle speed: 18,000 rpm - HSK 63 - Measuring probe - Blum laser tool measurement system - Coolant tank, 980 liters - Internal coolant system, 40 bar - Chip conveyor - Electronic handwheel - Operating mode 4 Redpfozhufhex Al Uscf - Preparation for 3D Quickset (software) - Universal milling head with controlled A-axis Machine from a space technology institute. Excellent condition. Subject to errors and prior sale.

Condition: used, Year of construction: 2009, Technical details: turning diameter: 1000 mm Redpfx Alot Rmdzj Uscf swing diameter: 1000 mm Machine type: Vertical lathe Manufacturer: Hessapp Type: DV 62 Serial no.: 14.2308 Working range of the spindle Largest diameter 1000 mm Largest swing diameter 1000 mm Cross slide travel Stroke of the vertical slide 900 mm Stroke of the horizontal slide 1810 mm Total travel 2315 mm Turning spindle Spindle head with centering cone according to DIN 55021 A15 Spindle diameter in the front bearing 203 mm Main drive Via a controlled asynchronous motor and gear transmission with range switching. Spindle speeds Speed ??range I: 5 - 350 rpm. Speed ??range II: 30 - 1000 rpm. Travel speed X/Z axis: 10 m/min. W1 axis: 8 rpm No C-Axis *

Condition: new, Hemming tool for Lvd/Trumpf Rjdpfx Alji Hbcwe Ujcf

Condition: good (used), Frame: 8800x1050x80 mm, 32 pieces Crossbars: 1860*75*45 mm (2800 kg/shelf), 352 pieces Rcedpfod Hbqnjx Al Ujf Partial quantities can also be purchased. If you require shelving or accessories in different configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. A customized offer tailored to your specific needs is a matter of course for us. Shipping: Please inquire about shipping costs, providing your postal code and location, as well as the desired quantity of items.