Column Drilling Machine

Cincinnati PTC 20

Condition: new, Year of construction: 2022, Power: 1,1kW Drilling capacity steel / continuous drilling capacity: 30mm / 25mm diameter Cjdpfx Afjgulr Hsnogn Speed range: 120 - 1810 rpm Speed steps: 9 Spindle mounting: MK-4 Drilling stroke: 120 mm spindle throat: 254 mm table size: 475 mm x 425mm Drilling table lateral tilting / rotating: 45° left / 360°. column diameter: 80 mm Quick chuck: 1 - 16 mm Weight: 132 kg

Condition: used, functionality: fully functional, total height: 1,715 mm, total width: 735 mm, total length: 1,475 mm, power: 3.3 kW (4.49 HP), overall weight: 3,300 kg, Forging hammer is in excellent condition and could be checked under power at any time. Nominal mass of drop parts, kg 75 Cjdpjxwuv Eefx Afnegn Impact energy, kj 1,4 Max number of blows per minute 210 Working zone daylight, mm 300 Die impression size, mm 130 x 63 Motor capacity, kW 3,3 Hammer dimensions, mm 1475 x 735 x 1715 Hammer weight with anvil block, kg 3300

Condition: new, Year of construction: 2026, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm Cgodpfx Afsg U Uv Rsnon 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: new, Optimum OPTIdrill D 33 Pro pillar drill action set 3003040SET with V-belt drive. TECHNICAL DATA Dimensions and weights Length (product) approx. 915mm Column diameter 92mm Width/depth (product) approx. 450mm Height (product) approx. 1705mm Weight (net) approx. 132kg Drilling capacity Drilling capacity steel (S235JR) 30mm Continuous drilling capacity steel (S235JR) 25mm Drilling table Drilling table work surface length 475mm Drilling table work surface width 425mm Drilling table T-slot size 14mm Drilling table rotation 360 Drilling table inclination 45° Distance spindle - drill table max. 695mm Speed range Speed range120 - 1810min¯¹ Number of speed ranges9 Electrical data Drive motor power 1.1kW Supply voltage 400V Mains frequency 50Hz Machine base Distance spindle - machine base max.1180mm Machine foot working surface length 410mm Machine foot working surface width 325mm Machine foot T-slot size 16mm Machine foot T-slots quantity 2 Machine foot T-slot distance 250mm Spindle Quill stroke 120mm Spindle holder MK4 throat 254mm SCOPE OF DELIVERY Quick-action drill chuck 1 - 16 mm Cgedpfx Afjt N Iuxonon Morse taper MK 4/B16 T-nuts Machine vice BMP

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 7/61, Manufacturing origin Swiss Voltage 380/50/3 Netweight abt. 760 kg Dimensions abt. 1250x1000x1700 mm Cgedpfxed Amgke Afnen TECHNICAL DATA WORK CAPACITY Travel X and Y 200x200 mm Vertical slide travel 250 mm Travel of drilling spindle 70 mm Max free passage between table and spindle nose 330 mm Free passage between column and centre of spindle 260 mm Max drilling capacity (steel) 10 mm Max reaming capacity 50 mm TABLE Usable surface 400x300 mm Admitted load 100 kg Travels X and Y through motors Number of T-slots 6 (longitudinal) DRILLING HEAD Spindel morse taper 0 Speed of spindle 150-3000 rpm Feed of drilling spindle 0,015 mm/t PRECISION Direct reading on divided drums 0,01 mm Direct reading on verniers 0,001 mm Guaranteed precision on displacement of slide-way 0,002 mm MEASURE Measuring system direct, optical Elements of measure graduated rule, div.1mm Read-out projection screens Shifting of zero-point yes Direct read-out 0,001 mm Guaranteed positioning precision 0,002 mm Installed power 1,2 kW errors and omissions excepted data given without obligation Inventory Nr.2160006, machine equipped with : 1 turning table Ø 220 with optical measure 1 centering microscope with 3-points suspension, zoom 40x, lightening 1 centering device with dial comparator cap. 3 mm. MT0 1 centering point MT0 1 tracing tool with spring-mounted point MT0 1 center punch MT0 1 chuck for centering drills MT0 1 self clamping drill-chuck 0-5 mm., MT0 1 boring head type 0, cap. 0.5-30 mm., MT0 1 levelling foot with 2 round levelling supports

Condition: used, Year of construction: 1999, Technical details: bore capacity in steel (diameter): 32 mm throat: 293 mm bore stroke: 120 mm bore capacity in cast iron: Ø 38 mm spindle taper MT: MK 3 spindle throat: 293 mm spindle speed:: 160 - 2250 / seples U/min feed: 0,10 - 0,20 / manuell+automatisch mm/U Distance spindle/table max.: 55 - 642 mm table clamping surface:: 300 x 300 mm drill table adjustment: ja mm Csdpfxova Hmrs Afnjgn column diameter: 115 mm distance spindle center to floor plate:: 1207 mm total power requirement: 1,9 kW weight of the machine ca.: 280 kg dimension machine xH: 0,7 x 1,0 x 1,9 m Column drilling machine with infinitely variable speed adjustment and automatic feed. Tapping with changeover switchEquipment: RÖHM 3 - 16 mm chuck, operation by foot switch left/right *

Condition: new, Year of construction: 2025, 0330 mm 210 mm 1000 mm 167 mm 40 mm Cgsdpewp Tq Usfx Afnen 2,2 kW

Condition: new, Precise, quiet and reliable drill press. Built to strict accident prevention standards. Precision spindle axis with tempered morse taper, base plate machined. Electronic speed variator included. Rotary table + vise mm 350 X 250. Drilling capacity on steel :R50 mm ø 22. Tapping capacity on steel :R50 mm M 14. Spindle taper :CM2 Spindle stroke :mm 90. Spindle sleeve diameter :mm 52. Column diameter :mm 98. Spindle center column distance :mm 201. Transmission PU Electronic variable speed drive (E). Cjdpfx Asir Aihjfnegn Spindle speed :Rpm 270 ÷ 4,200. Motor power :kW 0.75 / 220 V Single phase. Dimensions :( h x w x d ) mm 1950 x 600 x 680. Weight :Kg 220.

Condition: like new (used), Type: for META Clip boltless shelving units Size: For shelves 30 cm deep Height: 15 cm Finish: Galvanized Price: 30 cm €1/each The 50 cm version has already been sold. A shelf divider or shelf organizer is a practical storage accessory that allows shelving units to be divided into smaller compartments or sections. These elements are primarily used to create order and clarity for various items – such as books, documents, dishes, clothing, or office supplies. Cgodom Dr Txopfx Afnjn Shipping: Please inquire about freight costs by stating your postal code, location, and the desired quantity. Additional services: Planning, shelf assembly/disassembly, purchase/sale Changes and errors in technical data, specifications, and prices as well as prior sale reserved!

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 540 mm, travel distance Y-axis: 240 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 45 rpm, spindle mount: MK 4, throat depth: 350 mm, quill stroke: 130 mm, total length: 1,250 mm, total height: 1,900 mm, table width: 225 mm, total width: 1,100 mm, table length: 800 mm, drilling capacity: 40 mm, spindle nose: MK-4, nominal power: 2.2 kW (2.99 HP), Milling-/Drilling Machine, drilling capacity Ø 40 mm, motor 1,9 /2,2 KW, table size 800x225 mm, spindle speed 45-1650 rpm stepless, MT-4, el. table arising device, automatic spindle feed, coolant device, dimensions 1250x1100x1900 mm, weight ca. 600 kg Codpfowt Swzex Afnjgn