Tilting spindle moulder

CASOLIN - ITALY F 45 KL - CE STANDARD

Condition: ready for operation (used), functionality: fully functional, Cutter shaft speed: 30,000 + 4,000 rpm Milling spindle height adjustment range: 135 mm Maximum milling tool diameter: 390 mm Maximum tool clamping height: 225 mm Spindle diameter: 40 mm Milling motor: 5.5 kW Cross-cut saw speed: 3,000 rpm Cross-cut saw height adjustment: 190 mm Max. cutting height of cross-cut saw: 100 mm Crodpjyync Tsfx Aqvoi Max. saw blade diameter: 350 mm Cross-cut saw motor: 0.75 kW Saw blade arbor: 30 mm Sliding table travel: 1270 mm Length stop range: 1750 mm Weight approx.: 740 kg

Condition: reconditioned (used), Year of construction: 2004, AUTOMATIC WINDMILL PRESS WITH MECHANICAL LOCKING AND FEEDING AFTER A COMPLETE RENOVATION Crsdpfx Aqolnanwjvoi

Condition: like new (used), Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, including support baskets Filter area: 77.6 m² Filter area load: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with feed hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring to raise the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/design: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascade connection of up to 2 fans up to 37 kW with frequency converter interface - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hours counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touchscreen - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluation; rotation monitoring of the rotary valve - 24 V DC exhaust/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 running meters of cable - Ducting system including elbows, branches, reducers, PU hoses, machine connections, small parts, and EP dampers for exhausting 11 woodworking machines 1 HRS per specification - Return air system in accordance with TRGS 553, with changeover damper and fire damper Crodpfszlbqrex Aqvei - Galvanized base frame for ...

Condition: used, Year of construction: 2019, Highly flexible vertical machining center for milling, drilling and cutting. The BREMA patent for processing Credel Ikzgepfx Aqvsi vertically, allows this series of machines to be the most flexible and productive machine par excellence to a very high quality level. Furthermore, the automatic return / rotation system of the panel makes it fully automated. Possibility of working in height up to 1300 mm, working on all 6 sides of the panel. Working dimensions: * length 300 - 2500 mm * height 60 - 1300 mm * thickness 10 - 80 mm * max weight 50 kg Machine programming and control system with PC - TPA Albatros software. Programming editor with a high-level software interface allows you to program the machine easily and intuitively and also allows: * linear, circular and helical interpolation * double zero reading * mirror program management * optimizer for revolver tool diameter * optimizer for independent spindle diameter * DXF file conversion (geometric conversion) * import of work lists in ASCII format * extra key for programming from the office * gun barcode reader * 17” LCD monitor * Windows 7 professional operating system Panel introduction and handling by means of motorized vertical transfer with rollers and rubber-coated pressers for sealing of the panel during the workings, with a motorized carpet length of 2000 mm, with speed regulation electronically adjustable with converter. The photocells and the NC program guarantee the introduction of one or more panels in sequence using selector. Panel height reading system consisting of an independent axis able to read the panel height before getting into the car. Size reading tolerance +\- 0.15 mm. In case the tolerance is exceeded a message will inform the operator and the machine will stop the operation in progress. Panel thickness reading system using a mechanical feeler Horizontal vice - M.O. axis which allows the thickness of the workpiece to be established from the program. Vertical vice - M.V. axis which allows the program to establish the height dimension of the piece being processed. Chain - X axis - patent double section with laser photocells able to read the reference zero of the panel before carrying out the work. The double section allows you to carry out machining on the lower side of the panel thus having the possibility of work the panel on 6 sides. Brushless motors with programmable speed regulation by NC. Drilling unit with independent spindles 7 + 17 x 32 mm 24 independent spindles with 32 mm pitch arranged as follows: * 7 spindles aligned in X axis * 17 spindles aligned in Y axis Unit driven by a high-frequency motor that allows the rotation change of the spindles up to 7000 RPM The Brushless motor allows drilling depth control and forward speed control. Upper revolver milling group with 10 positions and tool change controlled by NC. 11 KW motor with direct transmission of movement to the tool up to 18000 RPM. The rotation of the revolver generated by controlled axis with Brushless motor allows quick tool change. 10 aggregate heads included in the revolver Automatic lubrication 180° panel translation and rotation system Movement and rotation system of the panel arriving from the machine which allows unloading or rotation of the panel and the return to the machine for machining on both surf

Condition: used, Year of construction: 1990, with Tersa cutter shaft Machine in working order completely set up used good condition cleaned functionality tested partially refurbished Manufacturer: Martin Type: T43 Year of manufacture: 1990 Machine no.: V 177666 GS-tested GS-tested for wood dust Segmented pressure beam Rubber feed roller Rubber extraction roller Feed rate m/min: 6 9 12 18 m/min Number of cutters: 4 automatic motor brake Tersa reversible cutters Digital display for planing height electric height adjustment with tip fine adjustment Motor kW: 5.5 Planing width approx. mm: 630 Planing height approx. mm: 250 Dust extraction connection mm: 160 Crsdpfozg Nl Tsx Aqvoi Space requirement approx. L x W x H mm: 1200x1250x1200 mm Weight approx. kg: 1000 Location: 97447 Gerolzhofen, free loading, unpacked Handover in current condition as inspected, without warranty

Condition: new, Sarmax CHEYENNE SP2 600 Brush Aging Machine Working width: 600 mm Maximum working height: 300 mm Crodpfxsyf Dcls Aqvji Transport belt with adjustable speed: 3–15 m/min Includes: steel brush + tynex brush Total power: 9 kW Technical documentation CE certificate Brand new machine available on order

Condition: new, Number of milling spindles 2 St. fence 1 ja workpiece ja Stegherr Cross rung milling machine TYPE KSF-mini including standard stop with 2 sliding stops, without tools With the KSF-mini, all of those that occur in practice can be used Crossbar connections can be made quickly and precisely. The Precise execution is achieved by having the workpiece in one Clamping is machined on three sides. The tool is driven by two three-phase motors; the tension of the Workpieces pneumatically. The profile cutter is designed for the web width. The saw blades that... If you carry out flattening, spacer rings are used to match the dimensions of the Profile milling cutter adjustable. The swivel device is free of play. The machine is designed for a maximum workpiece cross section of 56 x 46mm. Credpfsyrtzqjx Aqvoi Voltage Europe: 400V(+/-10%)/3Ph/50Hz, USA: 440V(+/-10%)/3Ph/60Hz Other voltages on request. Operating instructions in German or English. Table base EUR 1.070.00 Foot switch EUR 900.00 Adjustment optics EUR 130.00 Profile milling cutter in HM-Wepla version, available for selection: Ø 5,7,9,11,13 mm. Price per piece EUR 650.00 1 set of replacement insert knives for profile milling cutters (=10 pieces) EUR 190.00 HM saw blade, price EUR 170.00 per piece (For a web of e.g. 10 mm, 3 saw blades are required) Setting the machine to the tools provided by the customer, price EUR 700.00 per individual tool Packaging in a crate (suitable for land transport) EUR 650.00 Packaging shrink-wrapped on a pallet (only within Europe, not for air freight) EUR 340.00 Pricing ex works, unpacked, uninsured, for delivery within Germany plus the VAT valid at the time of delivery. (all technical information according to the manufacturer, without guarantee!)

Condition: new, Year of construction: 2026, extraction capacity ~ 6500 m3/h engine power 5.5 kW rotation speed 3000 rpm nominal voltage 400 V, 50 Hz extraction nozzle 280/200 mm extraction speed 28 m/sec. Number of filters 35 DIMENSIONS (length x width x height) 920 x 2100 x 2250 mm weight 410 kg Filter category G Filter material polyester Noise level 80 dB without connection / 65 dB when connected via pipe to the machine Filter surface 17.1 m2 Negative pressure 3000 Pa Polyester filter, 3 microns Codpfx Aqev Du Tnsvjri 2 containers Drive system Filter cleaning using vibration system with control + 850 euros for the models with fire extinguisher (Safe System) + 500 euros for the models with inverter (speed control)

Condition: excellent (used), Year of construction: 2023, DEMONSTRATION MACHINE! For sale is a used Felder KF 700 SP sliding table saw & spindle moulder with a cutting width of 800 mm. The machine is in excellent condition and has been refurbished and inspected by our professional staff. (Fully functional) Technical data: Crodpfx Aqsy Hgxmevei - Tilting circular saw and spindle moulder 90-45° - Sliding table 2500 mm - Extension table with mitre fence 2600 mm - Rip fence with fine adjustment - Cutting width 800 mm - Spindle fence with multi-adjustment system - 4 spindle speeds - 3 motors, each 7.5 HP (5.5 kW) - Automatic star-delta start The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, spindle moulder, combination machine, combi machine, milling machine Reference: R-D1618

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 4,600 kg, grinding height: 160 mm, height adjustment type: electric, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, grinding belt width: 1,400 mm, workpiece width (max.): 1,350 mm, Heesemann HSM.3 multi-purpose surface grinding machine with crosshead unit, calibration unit, and DB-S unit. An all-rounder in a compact space. Calibrating, veneer and lacquer sanding, texturing, polishing, sanding fillers, edge rounding, ... - Automatic workpiece thickness measurement - Adjustable vacuum, integrated into the machine body - Height adjustment not via a chain drive, but via direct drive - Non-driven rollers at the infeed and outfeed (2 each) - Industrial PC 15.6", terminal on the front left - Program memory for up to 1000 programs - Feed rate 3 - 15 m/min - MMI package - Program for remote maintenance - Program for dust extraction flap control - Cross-sanding unit, 15 kW, stepless sanding belt speed, for veneer sanding (longitudinal and transverse), lacquer sanding, saw-rough effect, with sanding belt cleaning, pressure bar with computer-controlled selective pressure control system CSD - Longitudinal sanding unit with pressure lamella belt and calibration function, 15 kW, stepless sanding belt speed, calibrating, fine sanding, and lacquer sanding, with sanding belt cleaning, pressure bar with computer-controlled selective pressure control system CSD - Rotating disc brush unit DB-S, for fine sanding, lacquer sanding, edge rounding, sanding fillers, polishing, texturing - Uninterruptible power supply - Energy Management System EMS - Ionization bar from above - Workpiece extraction system with individually controllable, rotating compressed air nozzles, inside the machine frame, conveyor belt cleaning program - LED lighting in the machine - and much more The machine is available in our showroom for demonstrations. Crsdpoztafwsfx Aqvji Inspections and trial runs can be arranged by appointment.