Difference Way Press

Bruderer Leinhaas DDP2-R11-125

Condition: used, Year of construction: 2007, pressure 100 t stroke 500 mm table surface area 900 x 600 mm rapid traverse 22 mm/s stroke speed 2 mm/s ram surface 700 x 350 mm total power requirement 2,2 kW weight of the machine ca. 1,6 t Itjdpfxevprv Rj Aa Ieh dimensions of the machine ca. 1,9 x 0,85 x 2,3 m The machine is of the Italian make SICMI, which was traded by the Knuth company.

Condition: good (used), Year of construction: 1982, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 3 Standard slide units 1 Narrow slide units 1 control shaft Working range: wire diameter range: 0,5 - 4,0 mm Itodpfxen E N Nde Aa Ioh strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material Iodpofg Rlcjfx Aa Isth thickness different cutting programs, each with a different cutting length and number of pieces program.

Year of construction: 2001, condition: excellent (used), Multispindle lathe Schütte AG20 Ijdpohrihyjfx Aa Isth

Condition: excellent (used), functionality: fully functional, Year of construction: 1984, Loading capacity: max. 300 Kg. Diameter of decoiler: 1.000 mm Diameter of spool: max. 900 mm Isdpfxof S I I Hj Aa Ieth Inside diam of spool: 240 - 560 mm Hight of spool: max. 180 mm

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm :5 :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m Ijdpfecxxx Rsx Aa Ijth with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition

Condition: new, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 58 mm, turning diameter over bed slide: 470 mm, center height: 235 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,150 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, Tip height: 235 mm Itedpfxscirnis Aa Ijh Center distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 mm Features include Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Year of construction: 2019, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: MISCO1082, Oil Mist Collecting and Regaining. MISCO is used for collecting and getting rid off the oil in the CNC machines cabin. It is a water vapor, aerosol, smoke, oil mist filtering / separating device. Also allows condensing and recycling the condensed liqud back to the sump The particulate-smoke-gas-water in the air sucked in is filtered through the vapor separation units. The saturated oil-water etc. contained in the air is also separated and recovered, and the air is cleaned by 98% of the dry air. Removal of parts washing machines vapor-mist, Welding fumes, Oily air off CNC machines In the industry and even In the industrial kitchens a lot of oil mist, various gases, fumes and dusts are mixed into the air and create a risk of fire. In addition, they are inhaled by workers and cause damage especially to the lungs, respiratory tracts and other vital organs. For this reason, harmful substances such as gas, dust, smoke and similar substances must be cleaned by absorbing harmful substances in terms of safety and health. Application Areas: Ijdsd Nwk Ujpfx Aa Ioth CNC Machines Welding fumes, Allows removal of oil vapor and recovery of existing fluid in CNC machines Automotive - Metal Processing – Food Industry - Industrial Kitchens - Steel - Casting - Chemical Industries etc. Working Principle; 1-Entry of dirty smoke –vapor- mist 2- Condensation with laminar flow over the walls 3- Disintegration of the particles passing through the filter 4-Recycling of condensing liquid 5-Dry and clean air evacuation For detailed information please contact us. mistcollector, cnc cutting oil, fume removal, cutting oil fume collector

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW weight of the machine ca. 4,5 t Itsdpovuucksfx Aa Ijh required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: new, pressure 8,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm Isdpfjfv Awajx Aa Ieth spindle diameter 25 mm weight of the machine ca. 27 Kg dimensions 160 x 230 mm