Edgebander

BRANDT AMBITION 1440

Condition: like new (used), Year of construction: 2011, machine/vehicle number: 0-261-04-5736, functionality: fully functional, operating hours: 806 h, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, feed rate X-axis: 11 m/min, total length: 5,700 mm, Equipment: documentation/manual, Brandt AMBITION 1440 KDF Year of manufacture: 2011 Year of commissioning: 2013 Nkedpeylvpqjfx Agnou In very good condition

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Nodpfx Agexyiilonsku Storage location: Nattheim

Condition: used, Holz Her STREAMER 1057 FÜ + PU Edge thickness: 0.4 - 6 mm Nkjdpfxeyg H Hie Agnou Modern control system with selector switch for aggregate adjustment Pre-milling unit for precise workpiece preparation before the gluing section Fully automatic edge magazine for coil and strip materials GLU-JET cartridge adhesive application station + PU gluing Adhesive application via nozzle technology Workpiece height: 6–60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for coil and strip material up to 6 mm edge thickness With pneumatic adjustment for 0–10° inclination of the end saws Milling unit for flush trimming up to 6 mm, radius milling and bevel milling up to 15° Corner rounding unit for edges up to 3 mm thickness Scraper unit for bevels and radii, equipped with 2 scraper holders Flat scraper unit for finishing Spraying device – PU Machine equipped with all processing tools Machine is WORKSHOP-TESTED and in TOP CONDITION Available from stock in Lieboch

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed max. infeed width 450 mm max. infeed height 140 mm Motor 75 kw with frequency converter for variable speed Nodpou Rl Rujfx Agnjku no vibrating chute included

Condition: good (used), Year of construction: 2018, 0,4 - 6 mm Workingpiece thickness from to 8-60 mm Total length 3960 mm Feed speed 10 m/min. Weight 1055 kg Nkjdex I Sgrjpfx Agnou

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 2459, functionality: fully functional, Machine in very good condition - Very user-friendly control panel - Minimum workpiece width approx. 80 mm - Minimum workpiece length approx. 200 mm - Feed rate approx. 10 m/min - Transport chain with firmly bolted special chain plates - Double roller top pressure - Machine length 4,300 mm - Machine width 1,400 mm - Weight approx. 1,250 kg Nodjx Ahmuepfx Agnsku - Extendable workpiece support at the front - Automatic central lubrication for cross-cut saw & corner milling unit - Melt glue container with Teflon coating (very low maintenance) - Ready for operation after approx. 5-6 minutes - Jointing unit - Pneumatic trim roller cutter - Direct glue application to the workpiece - Trimming unit for front & rear edges - Flush/chamfer/radius milling unit - Corner rounding - Surface scraper with dual sensing

Condition: ready for operation (used), Year of construction: 2010, Additional Equipment Diamond cutter and glue roller newly installed. Nedpfxjx D Rklj Agnjku This FELDER MG580 edgebander was manufactured in 2010. Ideal for precise edge banding applications, it represents a reliable choice for enhancing your woodworking operations. Contact us for more information. Application Types Edge Banding

Condition: used, Holz Her Sprint 1317-1 FÜ + PU heavy-duty design – edge thickness 0.4 – 5 mm SPS screen control large LCD display pre-milling unit before gluing area fully automatic edge magazine for coil and strip material glue application station for cartridges + PU gluing maximum edge height 51 mm automatic glue height adjustment press unit 1913, motorized pneumatic trimming unit for coils and strips with pneumatic adjustment for miter saw angle from 0–10° multifunctional milling unit 1942 MOT 2 Nksdpfeyfn Ursx Agneu milling unit with motorized adjustment axes for various radii – chamfering – flush milling via SPS copy milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm scraping unit for chamfers and radii pneumatic infeed and outfeed finish – surface scraper regular maintenance by Holz Her machine is FACTORY SERVICED, in EXCELLENT CONDITION available from stock in Lieboch

Condition: used, Year of construction: 2010, functionality: fully functional, power: 11 kW (14.96 HP), workpiece height (max.): 60 mm, edge thickness (max.): 10 mm, height adjustment type: mechanical, feed rate X-axis: 12 m/min, total length: 4,500 mm, total width: 1,200 mm, Max. edge thickness: 10 mm Max. panel thickness: 60 mm Max. roll material thickness: 3 mm Max. feed speed: 12 m/min Manual height adjustment Granulate glue system: glue pot below Quick-change glue pot: Yes Strip magazine: Yes Jointing milling unit: Yes Cut-off saw unit: 2 motors Flush/radius trimming Scraper unit: profile scraper, flat scraper, Yes Buffing unit: Yes Version: right-hand machine Machine dimensions: approx. 4,500 mm x 1,200 mm Control: FORMAT 4 E-MOTION Price plus VAT Nedpfx Agew Av E Iensku Machine is still in operation and can be tested at any time.

Condition: excellent (used), Knife grinder MVM model AF1500 with tilting magnet mm 1500, automatic grinding wheel downfeed, carriage steplessly variable speed Nedpfoygl N Ajx Agnjku