Procan Control

BOY

Condition: excellent (used), Year of construction: 1998, clamping force: 80 kN, screw diameter: 38 mm, The Boy 80T In Very Condition The Machine Done Low Hours One Owner Used In Training Centre Cpodpsyhrqisfx Afnju

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Cjdpfx Aslz Rvljfnopu Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2020, operating hours: 8,600 h, functionality: fully functional, machine/vehicle number: 41625, clamping force: 250 kN, screw diameter: 28 mm, clearance between the columns: 254 mm, injection pressure: 1,405 bar, injection weight: 53 g, mold height (min.): 200 mm, ejector stroke: 80 mm, BOY 25 E (250-82) Year: 2020 Operating hours: 8,600 Cylinder Ø 28 mm HWR; 53.2 g for PS; 1405 bar Clearance between tie bars: 254 mm Minimum mold height: 200 mm Maximum platen spacing: 400 mm Open nozzle R35 Optional equipment: - Ceramic heaters with insulation - Controlled temperature in the material feed zone - Air blow-off valve Codpfx Aeyhmyrofnjpu - Connector for ejector plate safety switch - Drive for hydraulic shut-off nozzle - Included nozzle; hydraulic shut-off nozzle with BC needle - 2 heating zones for hot nozzles in the mold - Interface package, OPC UA The machine is exceptionally well preserved (like new); inspection is possible at our warehouse. EXW Vrhnika – You provide your own transport, we load the machine.

Condition: reconditioned (used), functionality: fully functional, clamping force: 220 kN, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Cpodpeyfphasfx Afnju Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. *The video shown in this listing is of a previously refurbished BOY 22M which is very similar to the BOY 22MA machine we are currently refurbishing. Please contact the team if you would like to see the machine in person.

Year of construction: 2005, condition: ready for operation (used), There are two BOY 55M available, both year of construction 2005. Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included. Cpodpfx Astyaypjfnsu

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, DR.BOY 22 E Manufacture year: 2013 Operating hours: 60,680 Stunden Screw: 14 mm Injection pressure: 2413 bar Stroke volume: 6,1 cm³ Clamping Force: 22 t Tie bar distance: 254 mm Cpedpfx Afeyg Iv Eeneu Mould installation height min.: 200 mm Plate distance max.: 400 mm Dimensions: 2500 x900 x 1700 mm Eeight: 930 k price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2016, operating hours: 7,278 h, functionality: fully functional, clamping force: 550 kN, screw diameter: 32 mm, displacement volume: 96 cm³, injection pressure: 2,127 bar, Dr. Boy 55 A DUROPLAST (nur 7.278 h) Manufacture year: 2016 Operating hours: 7,278 Stunden Screw: 32 Duroplast mm Codsyg Ivfjpfx Afnopu Injection pressure: 2127 bar Stroke volume: 96 cm³ Clamping Force: 55 t Tie bar distance: 360 x 335 mm Mould installation height min.: 250 mm Plate distance max.: 650 mm Dimensions: 3200 x 1200 x 2000 mm Eeight: 2430 kg Connected load: 11 kW THERMOSET Granule injection unit, Corepuller, Airvalve, Hotrunner 4x price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Boy 80M Year 1998 Closing 80 tons Scrow 36 mm Cpjdpfomt Hh Ejx Afneu Spray weighted 132 g spar distance 41x 35,8

Condition: excellent (used), Year of construction: 2014, Boy 100E / Hybrid machine Year of construction: 2014 Injection unit: Screw diameter: 32 mm Injection weight: 92.3 g Injection pressure: 2127 bar Dosing volume: 96.5 ccm Clamping unit: Clamping force: 100 t Distance between tie bars: 430x360 mm Codpfx Afsycr U Rsnopu Size of the clamping platens: 750x650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Procan Alpha 2 - touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Control system with air valve Hardened spraying unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Dimensions: Weight: 3530 kg Length/width/height: 4.37x1.21x2.20 m Drive: Pump/motor: 15 kW Heating output: 7.7 kW Total output: 22.7 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2004, Boy 90 M Year of manufacture: 2004 Injection unit: Screw diameter: 42 mm Injection weight: 193 g Injection pressure: 1724 bar Metering volume: 214.7 ccm Clamping unit : clamping force: 90 t tie bar distance: 430x360 mm size of clamping platens: 635x610 mm ejector: hydraulic clamping unit: hydraulic Control: Procan - touch screen Additional equipment: Euromap 12 Robot interface Air valve x 1 Dimensions: Weight: 3100 kg Length/width/height: 4.37x1.21x2.20 m Drive: Pumps/motor: 15 kW Heating power: 11,3 kW Total power: 26,3 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Codpeycqxzefx Afnjpu Price: Upon request

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 191523, clamping force: 490 kN, screw diameter: 30 mm, -KOM 3086- Offered here is a used injection molding machine. Technical specifications: Manufacturer: Engel Model: Victory 50 Cedpfx Asv Tb U Dsfnspu Designation: VC 200/50 Tech Clamping force: 50 t Year of manufacture: 2013 Machine number: 191523 Screw diameter: 30 mm Tiebar spacing: Tiebarless Centering diameter: 125 mm

Condition: excellent (used), Year of construction: 1997, Boy 80 M Year of manufacture: 1997 Injection unit: Screw diameter: 36 mm Injection weight: 132 g Injection pressure: 2085 bar Metering volume: 147.6 ccm Clamping unit : clamping force: 80 t tie bar distance: 410x358 mm size of clamping platens: 680x555 mm ejector: hydraulic clamping unit: toggle lever Cjdpfx Ajycqxusfnopu Control system: Procan CT Additional equipment: * Dimensions: Weight: 3200 kg Length/width/height: 4.14x1.21x2.07 m Drive: Pumps/motor: 15 kW Heating power: 10,4 kW Total power: 25,4 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2016, Boy 55A Pro / Operating hours: 18,153 in automatic mode / Machine in very good technical condition. Year of manufacture: 2016 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Injection pressure: 1508 bar Metering volume: 136.1 ccm Clamping unit: Clamping force: 55 t tie bar distance: 360x335 mm size of clamping platens: 665x600 mm ejector: hydraulic clamping unit: hydraulic Cpjdpfx Afoycqxhoneu Control system: Procan Alpha - touch screen Additional equipment: Machine in very good technical condition Operating hours: 18.153 in automatic mode Pneumatic core x 2 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/width/height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating power: 7,7 kW Total power: 18,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), Mouth width: 150x80mm 2 rotor blades (95mm) Cpodpfx Ajfhnv Iofneu

Condition: excellent (used), Year of construction: 2017, Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition. Year of manufacture: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Injection pressure: 1508 bar Metering volume: 136.1 ccm Clamping unit : clamping force: 55 t tie bar distance : 360x335 mm size of clamping platens: 665x600 mm Ejector: hydraulic clamping unit: hydraulic Control system: Procan Alpha - touch screen Additional equipment: Machine in very good technical condition Operating hours: 16.624 in automatic mode Pneumatic core x 2 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Cjdpsycqw Rsfx Afnjpu Weight: 2430 kg Length/width/height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating power: 7,7 kW Total power: 18,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request